mestic MW-80 Kettle User Guide
- June 12, 2024
- mestic
Table of Contents
mestic MW-80 Kettle
Product Information
- Product Name: Kettle MW-80
- Capacity: 1.0 L
- Voltage: 220/240 V
- Power: 500 WATT
- Weight: 0.5 KG
Product Usage Instructions
Follow these instructions to use the Kettle MW-80 safely and effectively:
- Before using the kettle, carefully read all instructions provided in the user manual.
- Ensure that the kettle is placed on a stable and heat-resistant surface.
- Fill the kettle with water up to the desired level, making sure not to exceed the maximum capacity of 1.0 L.
- Close the lid securely.
- Connect the kettle to a power source with a voltage of 220/240 V.
- Turn on the kettle using the power switch.
- Wait for the water to boil. The kettle will automatically switch off once the water reaches boiling point.
- Carefully pour the hot water from the kettle, holding it by the handle to avoid burns.
- After use, disconnect the kettle from the power source and allow it to cool down before cleaning.
- Clean the kettle using a mild detergent and a soft cloth. Do not immerse the kettle in water.
- Store the kettle in a dry and safe place when not in use.
Please refer to the user manual for any additional information or safety precautions.
Important safeguards
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electrical shock and/or personal injury.
- Read all instructions and save them carefully.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children should not play with the appliance.
- Cleaning and user maintenance should not be performed by children without supervision.
- Keep the appliance and its cord out of reach of children with age less than 8 years.
- Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Do not operate any appliance with a damaged cord or plug, or in abnormal state. If its main cord is damaged, it must be replaced by the manufacturer, the nearest service agent or a qualified person.
- This appliance is intended to be used in household and similar applications.
- Misuse may cause injury.
- Make sure that your outlet voltage corresponds to the voltage stated on the rating label of the coffee maker.
- Do not put the appliance, the power cable or the plug in water or any other liquid.
- Unplug from outlet when not in use and before cleaning.
- Do not operate any appliance with a damaged cord or plug, or in abnormal state. If the mains cord is damaged, it must be replaced by the manufacturer, the nearest service agent or a similarly qualified person.
- The use of accessory is not recommended by the appliance manufacturer. It may result in fire, electric shock and/or personal injury.
- Do not let cord hang over edge of table or counter, or touch hot surface.
- To disconnect, remove plug from wall outlet. Always hold the plug; never pull the cord.
- Do not use the appliance for other than its intended use and place it in a dry environment.
- Do not leave the applianceunattended while it is operating; the appliance must not be operated by children.
- Be careful not to get burned by the steam.
- Do not touch the hot surface. Use handles or knobs only.
- Never use your appliancewithout water in it.
- Make the appliance stand on a table or a flat surface.
- Your supply socket must be properly earthed.
- Clean the water container before the first usage.
- The product should only be placed on horizontal flat surface; please do not put the product on an inclined or unstable surface in order to prevent safety hazard.
- During use, the product must be placed in a position that is not easily accessible by children, and the cover should be securely closed to avoid spillage of boiling water.
- This product should only be used to boil water. Please do not boil other liquids such as milk and coffee.
- Do not plug in the product without water. To avoid damage to the product, never turn on the empty appliance.
- Fill with water according to the pre-set water level, with minimum level at “MIN” and maximum level at “MAX”.
- Unplug the product after use. Clean the product with dry cloth after cooling down and store it in a proper location.
Functional discription
Soft touch switch: After filling with an appropriate amount of water and properly closing the lid, press the “I” button; the heating indicator lamp will turn ON, and water will be heated until boiling. Press the “O” button to stop the heating at any time and the heating indicator lamp will turn OFF.
- Auto off after boiling: Product will turn off automatically after boiling, and the indicator lamp will turn off. If reheating is needed, wait for at least 3 minutes after turning off and then press the “I” button again.
- Dry boil protection: By mistake, when the product is switched on without it containing water, the dry boil safety device will function to provide a secondary protection.
- Thermal fuse protection: In case both the auto off and the dry boil safety device malfunction, the thermal fuse device will cut off the electricity supply automatically in order to provide the third level of protection.
Special note
- Never immerse the whole product into water.
- Do not disassemble the product. The product should only be serviced by the appointed service agent or centre.
Recycling
This product bears the selective sorting symbol for waste electrical and electronic equipment This means that this product must be handled pursuant to European Directive (2012/19/EU) in order to be recycled or dismantled to minimize its impact on the environment. For further information, please contact your local or regional authorities. Electronic products not included in the selective sorting process are potentially dangerous for the environment and human heath due to the presence of hazardous substances.
Declaration of conformity
Hereby Gimeg Nederland B.V. declares that the device MW-80, applies all basic requirements and other relevant regulations listed in the European directive for electromagnetic compatibility (2014/30/EU) and low voltage directive (2014/35/EU). If you require a full declaration of conformity, you can contact the adress listed on the backside of this manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>