LISKA SV-SP30 Smart Bracelet Instructions
- June 6, 2024
- LISKA
Table of Contents
LISKA SV-SP30 Smart Bracelet
1. Compatible Operating System and requirements.
Android 4.4 and higher/ 1OS 8.5 iphone 5s / Bluetooth 4.0
2. Preparation.
Make sure the battery is fully charged the first time. If the battery is too
low, please charge it for 2-2.5 hours. (Be sure to charge the battery the
first
time). In the off state, the bracelet will show the charging icon. Under the
on condition, the battery bar on the mam interface of the bracelet will be m
a state fluid.
If the bracelet is going to be unused for a long time, be sure to charge the
battery once every three months .
3. Connection instructions.
Mobile app download method
Method 1: Scan the QR code to download
Method 2: Search for “Wearfit” in the app store to download and install.
Function specifications
-
Time mode: The display shows the time and date. (The time of the bracelet after connecting to the app will automatically synchronize with the phone time, and the time it cannot be adjusted on the bracelet).
-
Sports information: automatically records the number of steps per day, calories
-
Heart rate measurement: Switch the bracelet to heart rate measurement and press and enter the heart rate interface to automatically measure the heart rate. The heart rate displayed on the interface of the bracelet 1s the last measured data.
-
Blood pressure measurement: The current point automatically measures the current blood pressure. It can also be measured manually with the APP. The wrist button changes to the blood pressure interface and press to enter the measurement. The measurement automatically returns to the corresponding interface.
-
Blood Oxygen Measurement: The whole point automatically measure the blood oxygen condition, and can also be measured manually by APP.
Wrist button it switches to the blood oxygen interface and the measurement is started with a long press. The measurement is completed and the corresponding interface automatically returns. -
Sleep monitoring: automatic dally detection of sleep quality
-
Exercise mode: Press and enter the exercise mode interface. There are three modes of running, chmbing and cycling. In each interface mode, you can start recording time motion and generate calories, touch pause and press to exit.
-
Smart reminder: Open the reminder in the app. When there is App, call, SMS and other information on the phone, there is a corresponding message on the bracelet.
-
More: stopwatch (long press to enter, exit, touch to start, pause), find the phone (long press to search, touch to pause), off (long press and shutdown), reset function (long press to return to the time interface), 2D code (scan the QR code in the app download address).
-
Other functions: raise hand to hght, sedentary reminder, do not disturb mode, shake to take a photo, measurement point, We Chat sports, Apple health, change to automatic language.
Frequently asked questions
Can’t find the bracelet or can’t connect?
Android system:
- Make sure that Bluetooth 1s turned on in the phone and that the Bluetooth sign is not on the smart bracelet (the smart bracelet is connected if there is a sign of Bluetooth). Put the smart bracelet and phone next to each other, try to search and connect. Make sure the phone’s operating system is Android 4.4 or higher.
- If you still cannot connect, on your phone go into settings – application administration – authorization administration – apphcation access authorization, find “wearfit” and give all permissions to allow access. Then go back into the settings to activate the GPS location service, restart the phone, try connecting again.
IOS system:
Make sure that the Bluetooth of the phone 1s turned on and that the Bluetooth
sign 1s not on the smart bracelet (if there 1s a Bluetooth sign, it indicates
that the bracelet 1s connected by other devices. please release the Bluetooth
in advance). After the Apple device connects once, if you turn the phone’s
Bluetooth back on mobile, the device will connect by default. So you can go to
your phone’s settings – Bluetooth – ignore this device, the App can detect the
bracelet
After fixing the smart band, does it show that it is not connected or that
the remaining battery is 0%?
Smart band and device are not properly connected, re-link devices.
No data Is displayed in the app?
In the main interface, pull down and update the data manually to display the
data in the app. Automatic data synchronization will only be synchronized when
the Wristband phone is first connected, followed by automatic data
synchronization for every hour. In addition, the measurement point assembly
must be activated. Our step count, heart rate and fatigue diagram column reads
the data point. If it is not open, the histogram has no data.
After updating, no data is displayed.
Go to app settings – restore factory settings – turn off smart bracelet – turn
on smart bracelet and reconnect to app. The data can be loaded into the
application
The time out of sync
Go to Settings – Application Management – Permission Management – enable app
permissions – connect smart pusher and app again – Pull down to update the
app.
Specifications
Observations
- If there is any problem with product quality or product usage, please contact the store directly, we will deal with it quickly
- The measurement results of this product are for reference only and are not intended for any medical use or basis. Follow the doctor’s instructions and you should not self diagnose and treated according to the measurement results.
- The waterproof rating of the product is IP67, It can be used as waterproof, not for diving and not being in the water for a long time. You should also avoid hot water because water vapor will affect the sound.
- The company reserves the right to modify the content of this manual without prior notice. Some functions are different in the corresponding software version, it is normal
- This product contains a polymer battery. Do not put this product in high temperature environment for a long time. Do not place this product near a flame.