RunCam Robin User Manual
- June 7, 2024
- RunCam
Table of Contents
RunCam Robin User Manual
NTSC & PAL System Switchable
The default is NTSC system. If you want to change to PAL system, please:
-
Short-circuit the two camera control pins.
-
Then power on, camera will restart in PAL system in about 2 seconds.
-
The system can be saved after power off. After switching to the desired system, please unplug the short-circuit cable.
Joystick Control
Dimensions & Installation
OSD Menu
Parameters
Modell
| Robiin
---|---
Image Sensor|
1/3″ 120dB WDR CMOS
Horizontal Resolution
| 700TVL
Lens|
1.8mm (M8) FOV160° 2.1mm(M8) FOV 145°
Mirror/Flip
| Available
Signal System|
NTSC / PAL Switchable
S/N Ratio
| >50dB
Electronic Shutter Speed|
Auto
Auto Gain Control (AGC)
| Auto
Min. Illumination|
WDR
| 120dB
DNR|
2DNR
Day/Night
| Color/B&W
Menu Control|
JOYSTICK
Power
| DC 5-36V
Current|
120mA@5V 50mA@12V
Housing Material
| ABS
Net Weight|
5.5g
Dimensions
| L19mmW19mmH18mm
Latency|
6ms(Min)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>