CALIBER RMD 803DAB-BT User Guide

: June 7, 2024
: CALIBER

Table of Contents

Connection Diagram
ISO Speaker Connection
- Connector A
- Connector B
SPECIFICATIONS
Unit Buttons And Connections
Remote Control
- WARNING
- WARNING
Notes
DNB Antenna Installation
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**CALIBER RMD 803DAB-BT User Guide

**

Connection Diagram

SUB-OUT
RIGHT-OUT
LEFT-OUT
VIDEO-OUT
AUX-AUDIO-R-IN
AUX-AUDIO-L-IN
N/A
REAR-CAM-IN
AUX-VIDEO-IN
RADIO-Antenna
USB 5VDC 1,5A (Charge output only)
DAB
MIC-IN

ISO Speaker Connection

Connector A

Braking
Rear camera
N/A
Battery +
Auto ANT
ILL
ACC+12V
GND

Connector B

REAR RIGHT SPEAKER (+)
REAR RIGHT SPEAKER (-)
FRONT RIGHT SPEAKER (+)
FRONT RIGHT SPEAKER (-)
FRONT LEFT SPEAKER (+)
FRONT LEFT SPEAKER (-)
REAR LEFT SPEAKER (+)
REAR LEFT SPEAKER (-)

SPECIFICATIONS

General: Power supply 12V DC neg. ground
Max power output: 75Wx4 channels
RMS power output: 25Wx4 channels (@ 10% T.H.D.)
Suitable speaker impedance: 4-8 ohm
Fuse: 10A
Dimensions (W x H x D): 178 x 100 x 150mm

TFT LCD
Display resolution (dot): 800(W) x 480(H)
Screen size(inch): 6.2″ (Diagonal)

Video output level
Composite: 1.0 • 0.2Vp-p
Load impendence: 75 ohms

USB/SD: Video
Type: 16:9 and 4:3
Compatible: MPEG1/MPEG2/ MPEG4/DivX/WMA
System: PAL/NTSC

Audio
Compatible: MP3/WAV
System: 24bit/96KHz

Photo
Compatible: JPEG/BMP/GIF/ PNG/TIFF

Radio: FM Stereo Radio
Frequency range: 87.5-108.0 MHz (Europe)
FM sensitivity: 12dBu
Stereo separation: 35dB (1 KHz)

AM(MW) Radio
Frequency range: 522-1620 KHz (Europe)

DAB’ TUNER
Frequency Range: 174 – 240MHz Screen mount
Antenna type: Male SMA connector Active (with separate 12V power supply wire).
Note: connect the antenna power supply wire to the remote/antenna wire (blue/white) of the head unit.

Bluetooth®
Supports: A2DP and AVRCP profile
Bluetooth® range: up to 10 meters (without barrier)
Transmission: Freq range: 2402-2480 Mhz/Max e.r.p: <100mW/20dBm
Note: Specifications and the design are subject to change without notice due to improvements in technology.

We are continuously improving/updating our products and product information. It’s therefore possible that there is a slight difference between the description in this manual to the operation of the product. If something is different or not clear; always check our website for the most current version.

Unit Buttons And Connections

Display:
6.2″ TFT-LCD touch screen
Reset:
Reset to factory settings
IR sensor:
Remote control IR sensor
Mic:
Built-in microphone
BND:
Change the band AM/FM/DAB+
VOL/SEL:
- Rotate for volume adjustment or adjust settings
- Push to enter the audio menu When ON, press once to turn the display OFF (During TFT off, the video out signal will be available so that the connected monitor will show the screen of the unit.)
  Press the button again to turn the display back ON
  Press and hold the button again to turn the unit OFF
HOME:
Go to “HOME”-screen (main menu)
AUX:
3.5mm Jack-in
SD:
Micro SD card reader (max. 32GB)
USB:
Standard USB port (max. 32GB)

Basic operations

Home screen
Push the [HOME] button (7) to show the main menu. On the home screen you can choose the available modes (RADIO / USB / SD I Bluetooth I AUX) or enter the SETUP / EQ menu.

Sound Control

Volume
Turn the [VOL] button (6) to adjust the volume level.
Audio settings
Push the home button and choose EQ from the main menu to go to audio settings. Here you can find preset equalizer, loudness etc.

Day/night display mode
Tap the on-screen Sun/moon button in the bottom left of the main menu to de /in-crease brightness.
Tap again to reduce brightness during night time.
Tap again to black out the screen.

Setup
Enter the setup menu by tapping the [SETUP] icon on the main menu. Tap the items you would like to set. You can adjust audio, date and time, language, calibration, etc.

Radio operations

Band
Tap the [BNID] button to choose FM1, FM2, FM3, AM1 or AM2. On each band up to 6 presets can be stored. Tap the [DAB] button to choose any available DAB+ station

Radio Seek Function
In Radio Mode, touch and hold the 4 or button to adjust seek the frequency automatically. Tap the button to adjust the radio frequency manually step-by- step.

Save preset stations
There are six numbered preset buttons on the screen (e.g: 87.50, 98.00), which can store and recall stations for each band. Tune in to the station you want to store, touch and hold any key from the ‘preset buttons’ until you hear a beep. The station will be saved in the designated number.

RDS
AF, TA, PTY are the RDS functions. Tap the on-screen buttons to make use of them.
Note: RDS might not be available in every country.

DAB operations

Tap the SEARCH button to search all the available DAB stations.
There’s a list of all the available DAB stations on the right side of the screen.
Tap the or button to select the previous or next available DAB station.
Tap the BACK or HOME button in the top left corner to return to the main user interface.
Antenna installation instructions are in the back of this manual

Bluetooth operations

Pairing
Activate Bluetooth on your mobile phone, and search for available devices. Select “RMD803DABBT CAL”, password “0000”. If successfully connected the name of the connected device will appear on screen

Dial pad
Touch the dial pad to dial the number you would like to call. Touch the [CALL] (green) button to send the number.

Call list
Displays your phonebook if you’ve given permission. Hit the ‘refresh’ button to load your phone’s phonebook.

A2DP
Press the [MUSIC ] button to enter the page to control playing music of your cell phone using the on-screen controls.

Incoming calls

Answer call: push the green horn at an incoming call
End call: push the red horn
Reject call: push the red horn at an incoming call

USB/SD operations

Plug the USB/SD card into the USB/SD port. The unit will start playing the contents automatically.

Audio playback
To control the audio playback, use the on-screen buttons.

Mirror Link

Connecting way

Connect the phone with a USB data cable to the device.
Your phone will automatically prompt you to download the correct app

Note: Some bigger format phones cannot be connected due to screen incompatibilities. More details can be found in our online full manual

Remote Control

: Standby
Mute: Mute / Unmute Audio
Mode: Choose between Radio/USB/SD/AUX/B/Bluetooth
: Move cursor left
USB/SD: Switch to USB / SD (if available)
: Auto search / Previous track
BND AMS: Switch to different radio band Press and hold for auto search
Vol: Volume decrease
No.0-9: Numeric buttons
Menu: Go to main menu
: Move cursor up
: Move cursor right
Enter: Play / Pause / Select or enter
: Auto search / Next track
: Move cursor down
Vol+: Volume increase
SEL: Sound select key
: Answer the phone
: Hang up

WARNING

Points to observe for safe usage

Read this manual carefully before using this disc and the system components. They contain instructions on how to use this product in a safe and effective manner. Caliber cannot be responsible for problems resulting from failure to observe the instructions in this manual.

WARNING

This symbol means important instructions. Failure to heed them can result in injury or material property damage.

Do not operate any function that takes your attention away from safely driving your vehicle.
Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in an accident.
Keep the volume at a level where you can still hear outside noises while driving.
Excessive volume levels that obscure sounds such as emergency vehicle sirens or road warning signals (train crossings. etc.) can be dangerous and may result in an accident. LISTENING AT LOUD VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING DAMAGE.
Do not disassemble or alter.
Doing so may result in an accident, fire or electric shock.
Use only in cars with a 12V volt negative ground.
(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.
Keep small objects such as screws out of the reach of children.
Swallowing them may result in serious injury. If swallowed, consult a physician immediately.
Use the correct ampere rating when replacing fuses.
Failure to do so may result in fire or electric shock.
Do not block vents or radiator panels.
Doing so may cause heat to build up inside and may result in fire.
Use this product for mobile 12V applications.
Use for other than its designed application may result in fire, electric shock or other injury.
Halt use immediately if a problem appears.
Failure to do so may cause personal injury or damage to the product. Return it to your authorized Caliber dealer or the nearest Caliber Service Centre for repairing.
Product cleaning.
Use a soft dry cloth for periodic cleaning of the product. For more severe stains, please dampen the cloth with water only. Anything else has the chance of dissolving the paint or damaging the plastic.
Temperature.
Be sure the temperature inside the vehicle is between +45°C (+113°F) and 0°C (+32°F) before turning your unit on.
Maintenance.
If you have problems, do not attempt to repair the unit yourself. Return it to your Caliber dealer or the nearest Caliber Service Station for servicing.

Notes

GB Caliber hereby declares that the item RMD803DAB-BT is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU (RED) and 2011/65/EU (RoHS).

DNB Antenna Installation

Place the antenna on the windshield near the A post
DNB Antenna Installation
Remove the cover of the A-post

Stick the transparent part of the antenna on the wind shield and put the black part on metal frame.

Power the DAB Antenna with the blue(/white cable) (12V Remote) ISO Connector 3A Make sure to strip the wires before connecting them

Dustbin Icon GB Old appliances and/or batteries must not be disposed with garbage! If the device/battery can not be used anymore, every user is legally obliged to dispose of old appliances and/or batteries separated from the garbage, e.g. at a collection point of his municipality/district.