CALIBER PMR 206BT Bluetooth Receiver and transmitter User Guide
- June 7, 2024
- CALIBER
Table of Contents
PMR 206BT
Bluetooth Receiver and transmitter
SPECIFICATIONS
Bluetooth’ version: v2.1
supports A2DP & APTX profile
Bluetooth’ range:up to 10 meters (without barrier)
Bluetooth’ Freq range: 2402-2480 Mhz
Bluetooth’Max e.r.p:<100mW/20dBm
Inputs:3,5mm Jack input (cable included) Bluetooth audio streaming signal
Power supply: Built-in rechargeable battery 160 mAh (Plays up to 8 hours) 2
hours charging time
Power input: DC5,OV (USB-to-Micro USB, cable included)
Dimensions: 50(W) x 35(D) x 14(H) mm
We are continuously improving/updating our products and product information.
It’s, therefore, possible that there is a slight difference between the
description in this manual to the operation of the product. If something is
different or not clear; always check our website for the most current version.
PRECAUTIONS
- Do not expose to liquids!
- Avoid extreme temperatures
- Do not disassemble the product. It may result in short-circuit or damage.
- Multi-functional Power button
- IN 3,5mm audio input. Use for transmission mode
- OUT 3,5mm audio output. Use for receive mode
- Micro USB charging input 5V DV
- Indicator lights
Red light: charging,
Blue light: fully charged
Blue&red light: Bluetooth pairing mode
Fast blue: pairing mode > device can be found
Slow blue: searching for 2nd Bluetooth device
Receiving mode
- Turn the PMR ON and connect the [OUT] to your non-Bluetooth device
- Find the PMR206BT in your Bluetooth device and pair
- Start playing music
Transmitter mode
- Turn the PMR ON and connect the [IN] to your non-Bluetooth device
- Connect your Bluetooth device with the PMR206BT using the buttons (Make sure your Bluetooth device is disconnect from any other device)
- Start playing music
Power ON/OFF
- ON: Press [0] to turn ON
- OFF: Press and hold [0] to turn OFF
Note: After 5 min. of the absence of a connection it will automatically
go into “sleep-mode” (lights will turn OFF).
Receiving mode
Makes it able to stream audio to a non-Bluetooth device
- Insert one end of the Jack-to-Jack cable into the [OUT] socket on the PMR and the other end to the Audio input (Jack or RCA*) of your non-Bluetooth device
- Turn ON the PMR (Red+Blue LEDs will start flashing fast)
- Set your Bluetooth device to ‘Search’ using the devices’ Bluetooth
- Choose ‘PMR206BT_Caliber from the list.
- If the connection is successful the Blue LED will start flashing slowly and you can start playing music.
- using the provided adapter cable
Transmitter mode
Makes it able to stream audio from a non-Bluetooth device to e.g. Bluetooth speakers or headphones.
- Turn ON the PMR (Blue LED will start flashing fast)
- Insert one end of the Jack-to-Jack cable into the [IN] socket on the PMR and the other end to the Audio output (e.g. headphone socket) of your non-Bluetooth device
- Short press the [ ] on the PMR to enter search mode
- Make sure your Bluetooth device is not connected to any other device and with 10m. of the PMR\
- If the connection is successful (could take some time) the Blue LED will start flashing slowly and you can start playing music.
If you want to connect a 2nd Bluetooth device short press the [ ] on the PMR
again to let it search and connect to the 2’*’ device (Max. 2 devices can be
connected at the same time).
Caliber hereby declares that the item PMR206BT is in compliance with the
essential requirements and other relevant provisions of Directive 2011/65/EU
(RoHS) and 2014/53/EU (RED)
Latest declaration form can be found at: DeclarationPMR206BT [PDF].
For all info on the disposal of items with the Wheelie bin icon, please see: wheeliebin [PDF].
WWW.CALIBER.NL
CALIBER EUROPE BV • Kortakker 10 • 4264 AE Veen • The Netherlands
Documents / Resources
|
CALIBER PMR 206BT Bluetooth Receiver and
transmitter
[pdf] User Guide
PMR 206BT Bluetooth Receiver and transmitter, PMR 206BT, Bluetooth Receiver
and transmitter, NL.FR.DE.GB.ES.SE.IT.PT.PL.GR.CZ SK
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>