CALIBER HWC 403PT Smart Outdoor Camera User Manual

HWC 403PT
USER MANUAL

SPECIFICATIONS

use only)

PRODUCT DESCRIPTION

The camera is a Wi-Fi based item that can work with e.g. Amazon Alexa by voice control. You can either control it with Android and iOS based APP by phone, anywhere, at any time. The latest information on this topic you can find online: calibersmarthome.com

FEATURES

• Works with Amazon Alexa by voice control
• Remote view and control via APP anywhere anytime
• Scene control: works with other smart products
• Motion detection alarm
• Smart Follow function
• OTA upgrade supported

We are continuously improving/updating our products and product information. It’s, therefore, possible that there is a slight difference between the description in this manual to the operation of the product. If something is different or not clear; always check our website for the most current version.

The (app) images and illustrations used are indicative and may vary per device and version

Caliber hereby declares that the item HWC403PT is in compliance with the essential requirements and other relevant provisions of Directive 2011/65/EU (RoHS) and 2014/53/EU (RED)

BUTTONS AND CONNECTIONS

1. Wi-Fl antenna
   If reception is weak, please consider using wired LAN (2)

2. LAN connector
   RJ45 connector for optional wired connection

3. USB DC input
   5V11A input

4. 2,5m Wire

5. Reset button
   To reset to factory settings (open cover)

6. IR LED lights for night vision

7. Camera lens

8. Smart motion sensor + Mic
   Motion sensor for the following movement. Microphone for talkback

9. Micro SD
   Supports up to 128GB card (open the cover)

10. Speaker
    Talkback function + alarm sound

11. Adapter
    5V 1A output

Mounting instructions

Use the provided screws and plugs to mount the camera on a wall. Make sure that the wire comes out from underneath the backplate using the recesses hole.

INSTALLATION INSTRUCTIONS

Warning: Make sure the camera to be within range of the Wi-Fi network to ensure a successful connection between the camera and router.

Wi-Fi Configuration instructions

1. Scan QR code to download and install “Caliber Smart Home”
   http://onelink.to/bzbcfw

2. Sign in with cell phone number or email.

3. Make sure the device on which the app is installed, is connected to the Wi-Fi network on which you want the camera to be too.
   Once the camera is plugged in it will be powered ON and the indication LED will flash rapidly or a sound will be heard.

4. Click “+” at the upright corner to select and add the device.

5. The APP will ask if the indication LED is flashing and if the startup tone was heard. Then click “next step”.
   If this is not the case, please reset the camera holding the reset button for approx. 10 seconds.

6. Check if the Wi-Fi network is correct, fill in the corresponding password, and confirm.
   Note that the password can only contain letters and numbers, no special characters.

7. The APP then will show a QR code on the screen.

• hold this screen approx. 20 cm in front of the camera lens, maybe move it around a little, till the LED turns solid for a few seconds.
• then confirm by clicking “I heard the beep”.

8. The APP will connect the camera. Please wait patiently till the action is completed.
9. When the camera is successfully added you can give it a personal identification name and can choose which group you’d like it to be in.

Through the APP the camera can be viewed and controlled remotely.

Some of the functions are e.g.:

• Live View (real-time view)
• Playback (only if an SD card is installed and the camera is set to record)
• Record and screenshot (record the live feed or make a screenshot and save it to your mobile device)

N ote: controls and functions can vary according to camera type/version and set settings.

Remove device

To remove the camera from the APP and Wi-Fi network:

1. Open the APP
2. Click the icon in the upper right corner, and then click the “Remove Device” button in the list
3. When removing the device is successful, the LED will start to blink rapidly.

Note: The ‘remove procedure’ will clear the camera’s connection which means: erasing all information about the Wi-Fi network. The camera name and the footage on the SD card should be removed manually.

CALIBER SMART HOME

LIVING IN COMFORT

With ‘Caliber smart home’ products you can be sure EvErything is controllablE with ONE APR WE chosE to partnEr with Tuya, a platform for smart home products which allows grEat control; not just camera ViEW but a wholE rangE of possibilitiEs

• SchedulEr

• Scenario’s
  (E.G: lights ON when the camera detects movement)

• Combine products

•  Share sEttings with the whole family

Explore our growing number of smart home products.
WWW.CALIBEREUROPE.COM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>