RunCam Scope Cam 4K User Manual
- June 7, 2024
- RunCam
Table of Contents
Scope Cam 4K
User Manual
Instruction Diagram
1.WiFi LED
2.WiFi Button
3.Shutter Button
4.Battery Status Light
5.Recording Status LED| 6.Microphone
7.Micro-USB
8.Charging Status LED
9.Battery Door
10.Railmount
---|---
Charging
Micro-USB supports DC 5~17V power supply. A DC 5V 1~2A charger is recommended.
The charging status light (red) will turn on during charging and turn off when
charging is complete. It takes about 2 hours to get fully charged.
Battery Status
MicroSD Card
Capacity up to 128GB; Class 10/UHS-I/UHS-II/UHS-III is recommended.
Note: U3 is recommended (4K@30fps/2.7K@60fps/1080P@120fps/1080P@100fps
requires U3 or above; other resolutions require U1 or above) Please confirm
that the SD card file format is FAT32, otherwise it is easy to cause errors.
Basic Camera Operation
Powering On/Off|
- Long press the Shutter button
---|---
WiFi On/Off|
- Short press the WiFi button
If the WiFi LED blinks blue, it means it is ready to be connected and it will stop blinking and become always on after being connected. Default SSID: RCSC4K_** (* for letters or numbers) Default WiFi password: 1234567890
Video Mode| Recording Status LED: Red
- Short press the Shutter button to start/stop recording.
Forced Shutdown|
- Simultaneously press the Shutter button and the WiFi button.
Connection to computer
After turning on the camera, connect it to the computer via USB cable, then it
will be recognized as a removable disc.
NOTICE: If the camera can not be recognized by the computer after
connecting, please make sure that a microSD card is well inserted. If the
information on the microSD card can not be read normally, please try with
another micro USB cable or USB port on the computer.
App
- After powering on, press the WiFi Button, the WiFi LED (blue) blinks when the WiFi is on and ready to connect.
- In the wireless network settings of your smartphone, find the camera’s SSID and connect to it with the password ‘1234567890’. After successful connection, the WiFi LED (blue) will be constantly on.
NOTICE: If using under low light, you can increase exposure in-camera
menu via APP to improve the image quality and vice versa, decreasing it to
avoid overexposure.
Android and iOS APP: Search ‘RunCam App’ on Google Play/App Store, or
download on our website:https://runcam.com/download/scopecam4k.
Firmware Upgrade
The WiFi LED(blue) blinks during upgrading.
Ensure that the battery is more than 50% before the upgrade.
Manually copy the firmware file (RCSC4K.BRN) onto the MicroSD card. Follow the
instruction on https://runcam.com/download/scopecam4k.
To get the latest features and best performance from your camera, make sure
you are using the most current camera software. You can update your firmware
with the RunCam App or at https://runcam.com/download/scopecam4k.
Parameter
| Image Sensor | SONY(8MP) |
|---|---|
| Focal Length | 40mm |
| Best Recording Distance | 30∼70 meters |
| Video Resolution | 4K@30fps/2.7K@60fps/1080p@120fps/1080p@100 fps |
/1080p@601ps/1080p@50fps/720p@240fps
Video File Format| MP4
Communication Interface| Micro USB
MicroSD Card Supported| 128GB max
Shutter| Auto 1/30 1/50 1/60 1/100 1/120 1/240
ISO| Auto/100/200/400/800/1600/3200
Battery Capacity| 850mAh
USB Power Input| DC 5-17V
Working current| MAX 500mA@5V
Net Weight| 96g (with battery)/82g (without battery)
Technical Support
Please visit: https://support.runcam.com/hc/en-us