ULINE H-1347 Jumbo Bath Tissue Dispenser- Double Roll Instruction Manual
- June 7, 2024
- ULINE
Table of Contents
ULINE H-1347 Jumbo Bath Tissue Dispenser- Double Roll
TOOLS NEEDED
PARTS
MOUNTING INSTRUCTIONS
NOTE: Recommended mounting height is 19″ from floor to bottom of
dispenser.
NOTE: Ensure that proper mounting hardware is used for appropriate wall
composition as enclosed hardware may not be compatible with your wall surface.
-
Insert key into lock opening on top of dispenser and turn to open cover.
-
Open dispenser cover and hold dispenser to ideal mounting place on wall.
-
Mark the four holes on the wall where screws will be inserted.
-
Drill into wall at four marked locations with 1/4″ drill bit. Insert wall anchors if necessary.
-
Hold dispenser over previously drilled holes and insert screws.
LOADING INSTRUCTIONS
-
Insert key into lock opening on top of dispenser and turn to open cover.
-
Insert a roll on each arm and close lid.
NOTE: The access panel on the bottom of the dispenser must be on the right side.
-
When first roll is out, slide access panel to the left to begin using second roll.
NOTE: The roll on the left side must be used up before the roll on the right can be used.
