motorola Fully Automatic Front Load 6.5 KG User Manual
- June 7, 2024
- Motorola
Table of Contents
Fully Automatic Front Load 6.5 KG
0
CONTENTS
· SAFETY PRECAUTIONS
2
· INSTALLATION INSTRUCTIONS
10
· NAME OF PARTS
14
· ACCESSORIES
15
· LOCK AND UNLOCK THE DOOR
16
· USAGE INSTRUCTION FOR DETERGENT CASE
17
· CONTROL PANEL
18
· NORMAL USAGE
19
· HOW TO USE THE WOOL PROGRAM
20
· HOW TO USE THE BLANKET PROGRAM
21
· HOW TO USE DELAY PROGRAM
23
· PROGRAM INTRODUCTION
24
· CARE AND MAINTENANCE
27
· WASHING TIPS
30
· VARIOUS FUNCTIONS
CHILD LOCK FUNCTION
31
· NO TROUBLE CONDITIONS
32
· TROUBLE SHOOTING GUIDE
34
· DISPOSAL & ROHS DECLARATION
36
· WARRANTY TERMS & CONDITIONS
37
1
SAFETY PRECAUTIONS
· To protect the user and other people’s health and property, be sure to
observe the following safety notice.
WARNINGS
PLEASE READ THIS PART OF MANUAL CAREFULLY FOR PROPER OPERATION BEFORE USING
YOUR MACHINE. · The precautions stated here are classified as “Warning” and
“Attention” according to the damage and the emergency caused by misoperation,
and are described respectively in line with the marks below.
Warning With no respect to mark, the misoperation may cause death or GBH.
Attention With no respect to mark, the misoperation may cause body harm or
object damage.
This mark indicates the content of warning or attention.
This mark indicates the prohibited action.
This mark indicates the compulsory action to be carried out.
Warning
·
Dismantling, repair or alterations should only be carried out by
2
professional technician as otherwise you may be subject to electric shock, may
cause fire or get injured. · Electricity supply must be unplugged with dry
hands. Otherwise, this may cause electric shock.
· Damaged or loosen wire or plug should not be used. Otherwise electric shock,
short circuit or fire may take place.
· Do not damage wire. Do not damage or alter the wire forcibly bend, pull
twist or handle the wire. Beside, please do not put weigh on or trap the wire.
Damage of wire may case electric shock or fire.
· Do not put water in direct contact with the unit during maintenance and
repair. This may cause short circuit or electric shock.
3
· Do not put gasoline, benzine, alcohol, thinner of fabrics with these stains
into or near to the washing machine. To prevent fire or explosion which may
cause injuries.
· This washing machine is equipped with the electricity wire with grounding
socket. The creepage protector shall be used if possible. To prevent
electricity leak which may cause injuries.
Please use the single socket with special voltage and current matched with
plug marked specification. The share of the same socket with other electric
appliances may cause fire due to excessive. Thoroughly wipe the power plug
when dirt is adhering the prong or around the base of the prong. Failure to do
so may cause a fire.
· Washing machine should not be installed in humid place or in places exposed
to wind and rain. Otherwise, electricity leak causing electric shock or fire
may occur.
4
· This washing machine is strictly prohibited to get close to the locations
with candle, mosquito repellent incense, dog-end or other kinds of open flame.
To avoid injuries caused by the lock damage.
· Do not operate the machine when there is gas leak.
5
WARNINGS
· Keep children away from the washing spinning basket and do not place box or
shelves next to the washing machine. Children may fall into the basket
resulting in injuries. This appliance is not intended for use by persons
(including children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their
safety.
· The glass door becomes hot in process of high-temperature washing. Do not
touch the door when the machine is on, especially children.
· If you need to open the door during high-temperature washing program, wait
until the temperature drop to safe standard, and the door unlocked
automatically.
· Packing material may be dangerous to kids, please keep all packing material
(plastic bag foam etc) far away from the kids.
Attention · Do not pull the wire from the socket when unplugging the unit.
To avoid electric shock or fire cause by short circuit may result.
6
Electricity supply must be unplugged with dry hands during maintenance and
repair. Otherwise, electric leakage causing injuries may occur.
· If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order to
avoid a hazard. · Do not wash, rinse and spin the water proof fabric or cloth.
Sleeping bag, raincoat, cover of skiing, utilities, bicycles, cars and motors.
Otherwise may lead to injury by abnormal vibration during spinning or damage
the washing machine, wall, floor and clothes.
· Keep hands and feet away from the bottom of the washing when it is motion.
Parts in motion beneath the unit may cause injuries.
7
Water supply hose should be tightly screwed to the unit. Failure to do so may
result in water leakage. Used for a long period of time, the unit may result
in water leakage caused by loosen union nut. So please check it in time and
screw tightly again.
Please unplug the unit when not using the unit for a long period of time.
Electric shock or leakage may occur due to deformation of plastic parts of the
unit. · Water of above 50°C should not be used for washing. Electric shock or
leakage may occur due to deformation of plastic parts of the unit.
· Do not stand on or put weight on the top of the unit. Otherwise, deformation
and damage may result causing injuries.
· Two people are required in moving or transportation.
8
·
Check water supply hose connection by turning on the water
before washing .
To prevent damages caused by possible water leakage due to
loosen screw or not tightly.
· The new hose-sets supplied with the appliance are to be used and that old hose-sets should not be reused.
· Do not block the ventilation openings on the bottom of washer by carpeting when the washer is installed on a carpeted floor.
· Please turn off the water tap when not using the unit. To prevent damages caused by water leakage.
9
INSTALLATION INSTRUCTIONS
Transportation
Two people are needed to carry the machine. One person on one side carries the
machine by holding the machine feet.
Location of washer
Washing machine must be installed on the ground which must be hard, flat and
skid proof. Please do not lay the washing machine on the soft blanket or
wooden floor. It is forbidden to lay the washing machine on the platform or
the bracket.
Remove the transport bolts used to fix the machine in transportation
To protect the machine in transportation, there are 4 bolts inserted into the
inner part of the machine. Remove these bolts before use. (otherwise there
will be strong shock, noise, and disfunction in spin process.) 1. Unscrew the
bolts that are fixed before transportation by spanner (4
bolts). 2. Remove the bolts horizontally. 3. Fit the lid into the holes. – Let
the sales force or professional maintenance worker to install the
machine. – Keep the dismounted bolts carefully, you will need them in house
moving. – As the picture shows, please be sure to confirm that the base
10
protection device is not stuck at the bottom of the washing machine before
use, otherwise it will affect the normal use of washing machine.
Adjust the machine horizontally
There will be strong shock, noise, and disfunction in operation if the washing
machine is not steadily installed. Please adjust the front adjustable Leg.
Methods are as follows: 1. Check whether the washer is on a level surface
using a plumb line as
shown in the Beside figure. · The washer is on level ground floor if the Frame
line of washer is
parallel with the plumb line. 2. Adjust the Adjustable Leg of washer if
necessary to make the washer
level as shown in the Beside figure. 3. Put your hands on the washer
diagonally, press and shake the washer
slightly to make sure that the washer is steady.
11
INSTALLATION INSTRUCTIONS
Connecting the Supply Hose 1. Check that sealing washers are firmly seated. 2.
Attach the curved end of the hose to the inlet valve of the washing
machine, tighten the coupling nuts securely by hand. 3. Attach straight end of
the hose to the tap. Tighten the coupling nuts
securely by hand. 4. Turn on the taps and check for leaks. Tighten the
coupling nuts firmly if
there is any leakage. If water pressure is strong, close the water tap
completely then open it slightly.
CAUTIONS: · Do not use water which is hotter than 50°C. · If your faucet is
not suitable, please contact Brand authorised service
help desk. Installing Water Supply Hose to the Washer Turn the nut clockwise
till the nut turned tight while holding the hose.
Turn the nut counter clockwise after turning the faucet off when you want to
detach the water supply hose.
12
INSTALLATION INSTRUCTIONS
CONNECTION OF DRAIN HOSE 1. When washing machine does not work, put drain hose
at back of
washing machine. (as pic 1 shows) 2. When washing machine works, put drain
hose into drainage pond (as
pic 2 shows), you can also put end of drain hose into sewer, and keep space
between end of drain hose and sewer elbow to avoid difficult to drain water
out of washing machine. 3. Clean filter in pump periodically to keep washing
machine working normally. Note: Do not take off drain hose stay, if not, it
will lead to drainage problems.
· Domestic use only: The appliance is designed for private household use only.
It is not suitable for commercial, industrial or trade use.
· Do NOT install the appliance: – Outdoors or in a damp or wet environment
(such as a bathroom). – In areas where caustic or explosive gases are present.
– Behind a lockable door, a sliding door or a door with a hinge on the
opposite side to that of the washer in such a way that a full opening of the
washer door is restricted.
13
NAME OF PARTS 14
ACCESSORIES 15
LOCK AND UNLOCK THE DOOR Lock the door
The door will be locked automatically when the machine gets started, and the
light will turn on at the time.
Unlock the door
When the light is on, press START/PAUSE button, the Wash/Spin tub stop, then
the door will be unlocked automatically. · The door will be not unlocked if
you directly pulled out the electrical
plug. · Foam spill over if you open the door during washing process, use
towel to clean it. · The door cannot be unlocked in high temperature or high
water level.
16
USAGE INSTRUCTION FOR DETERGENT CASE
· High bubble Washer powder or detergent is forbidden. · Use the detergent in
accordance with the instruction by its
manufacturer. · Excessive detergents will cause too much bubble and affect the
rinse,
also create function faults. · Choose suitable detergents in accordance with
the type and color of
clothes, the water temperature and the stain.
17
CONTROL PANEL 18
NORMAL USAGE
1. Preparation: · Load the laundry into the washer. Close the washer door. ·
Put the detergent and softener into the Detergent Case. · Connect the Drain
Hose. Connect the Water Supply Hose to the faucet and
turn the faucet on. Plug the Power Cord into a power-socket. 2. Press the
POWER button to turn the power on. 3. Twist the PROGRAM knob and choose the
program your need. 4. Select the PROGRAM according to the use need. 5. Press
the START/PAUSE button, the washer will start the washing operation. 6. At the
end of operation, the buzzer will sound.
19
HOW TO USE THE WOOL PROGRAM
For washing delicate and woolen clothes. They shall be washed as required in
the labels. 1. Preparation: · Load the laundry into the washer. Close the
washer door. · Put the detergent and softener into the Detergent Case. ·
Connect the Drain Hose. Connect the Water Supply Hose to the Water Tap
and turn the Water Tap on. Plug the Power Cord into a power-socket.
2. Press the POWER button to turn the power on.
3. Twist the PROGRAM knob to select the WOOL program.
4. Press the START/PAUSE button, the washer will start the washing operation.
5. At the end of operation, the buzzer will sound.
Precautions
· Take out the clothes in time when program ends, and hung to dry the clothes,
in case the clothes become distortion.
· No wash preset. · Water temperature should not exceed 40°C to prevent
distortion. · Wash the white or bright-colored clothes separately from the
dark-colored
clothes. · Use special detergent for wool to relieve damage of clothes, and
improve
the wash effect.
20
HOW TO USE THE BLANKET PROGRAM
For washing blanket and other bulky items. 1. Fold the blanket.
2. Put blanket into the wash/spin tub.
3. Preparation: · Close the washer door. · Put the detergent into the
Detergent Case. · Connect the Drain Hose. Connect the Water Supply Hose to the
faucet and
turn the Water tap on. Plug the Power Cord into a socket-outlet. 4. Press the
POWER button to turn the power on. 5. Twist the PROGRAM knob to select the
BLANKET program. 6. Press the START/PAUSE button, the washer will start the
washing operation.
21
7. At the end of operation, the buzzer will sound.
Precautions
Do not use net bag for the machine washable blanket, otherwise the washer
vibrates abnormally in the spin process and will be damaged. · Do not tweak or
roll clothes before put them into the tub. · Electric blanket and carpet are
forbidden of wash. · 100% villous and the long-villous blanket are forbidden
to wash. · Water temperature should not exceed 30°C.
22
HOW TO USE THE DELAY PROGRAM
The preset time means that when the washing is finished. 1. Preparation: ·
Load the laundry into the washer. Close the washer door. · Put the detergent
and softener into the Detergent Case. · Connect the Drain Hose. Connect the
Water Supply Hose to the faucet
and turn the faucet on. Plug the Power Cord into a power-socket.
2. Press the POWER button to turn the power on.
3. Twist the PROGRAM knob to select the desired program course.
4. Select the PROGRAM according to the use need.
5. Press the DELAY button to set the delay time.
6. Press the START/PAUSE button, the washer will start DELAY program.
7. At the end of operation, the buzzer will sound.
Precautions
· To change the delay time, please press POWER button, restart from step 2.
· To cancel the delay, press POWER to shut off the electrical power. · To
check the delay procedure, press DELAY button, the washer will show
you the current delay setting for 5 seconds. · The actual ending time maybe
different from the preset time as the
different of water pressure, drainage, type of clothes, water temperatures,
etc. · One minute after preset is started, only the DELAY light will be on.
23
PROGRAM INTRODUCTION
Mix Wash Quick Wash Cotton Synthetic Denim Shirt Blanket Drum Clean Winterwear Summer Lingerie Strong Wool Gentle Rinse + Spin Spin
Mix Wash of cotton and synthetics clothes. Quick wash of small quantity or light dirty clothes. Wash cotton clothes. Wash synthetic clothes. Wash denim clothes. Wash shirt clothes. Wash blanket or bulky laundry/items. Only for cleaning drum, don’t add clothes inside drum. Wash winterwear. Wash summer clothes. Wash lingerie and underwear clothes. Wash dirty clothes. Suitable for machine-washable wool clothes. Wash delicate clothes. Only rinse and spin clothes. Only spin clothes.
24
S No.
Program
Default duration
Temp. () Default
(HH:MM)
(Selectable)
30
1
Cotton
1:22
(0-20-30-40-50-6080)
2
MixWash
1:17
30 (0-20-30-40-50-60)
3
Synthetic
4
Wool
5
Gentle
6
Shirt
1:12 1:05 0:55 1:07
30 (0-20-30-40-50-60)
0 (0-20-30-40)
0 (0-20-30-40)
30 (0-20-30-40-50-60)
7
Blanket
1:07
0 (0-20-30)
8
Strong
1:37
50 (0-20-30-40-50-60)
9
QuickWash
0:15
0 (0-20-30)
10
Winter
Wear
11
Lingerie
12
Denim
13
Summer
14 Drum Clean
1:17
1:12 1:38 0:41 2:18
30 (0-20-30-40)
30 (0-20-30-40-50-60)
30 (0-20-30-40-50-60)
0 (0-20-30-40)
80
Spin speed Default
(Selectable) 700
(500-700-9001000) 700
(500-700-9001000) 700
(500-700-900)
500
500
700 (500-700-900)
700 (500-700-900-
1000) 700 (500-700-9001000) 700 (500-700-9001000)
700 (500-700)
700 (500-700-900)
700 (500-700-900)
700 (500-700-900)
700
25
15 Rinse + Spin
16
Spin
0:20 0.12
—
700 (500-700-900)
—
700 (500-700-900)
26
CARE AND MAINTENANCE
· Washing machine should be kept in good maintenance during long time of use.
Good using habit could extend its service life.
· Pull out the plug when in maintenance, in case of electricity danger.
Washer body
· Wipe the machine body with soft clean cloth. Dip the cloth into detergents
or liquid soap and then clean the machine body when there is heavy dirt on it.
· Do not pour water directly on the machine. · Do not clean the machine body
with scouring powder, diluents, gasoline,
alcohol, and other chemical things.
Sealing washer of the door
Wipe the dirt and fabric scrap away by towel every time after use. If there
are things like pin in the groove of the sealing washer, make sure to fetch
them out.
Cleaning methods of the detergent case
· Clean the detergent case regularly in case that detergent remained in the
case get mildew.
· Pull out while lift the case to carry it out, clean it by water and restore
it.
27
Clean the water inlet Valve
(Suggest cleaning it every 6 months) 1. Detach the Water Supply Hose from the
Water Inlet. 2. Take out the metal filter from the water inlet valve. 3. Clean
the metal filter of Water Inlet with a toothbrush etc, then assemble
the metal filter in the valve. 4. Connect the Water Supply Hose. 5. The lint
must not to be allowed to accumulate around the washing machine (not
applicable for appliances intended to be vented to the exterior of the
building).
28
CARE AND MAINTENANCE When the washer gets frozen
1. Wrap the faucet and Water Supply Hose joint by hot towel.
2. Dismount the Water Supply Hose and soak it into about 50°C hot water.
3. Pour into the tub about 2~3 liter 50°C hot water.
4. Link the Water Supply Hose, open the faucet and start the machine, check
weather the Water Supply Hose and Drain Hose is clogged.
29
WASHING TIPS
· Check whether there is anything in the pockets (for example: coin, pin,
clip, paper, etc.)
· Zips shall be zipped close and buttons or hooks shall be fixed. The loose
band or ribbon shall be bound together.
· Do not wash colored clothes together. · Follow the washing guide printed on
the clothes’ mark or the symbol types
of care label by the manufacturer. · Before first washing, use a white towel
dipped in detergents to rub an
uneasily discovered place of the clothes for a moment, check whether there is
color on the white towel, if the color fades, be careful in washing the
clothes. · If a part of clothes is too dirty, use a towel or soft brush dipped
in detergents to rub the dirty part slightly in a same direction. Then put the
clothes into machine. · The machine may shock heavily in spin when there is
only few clothes or single big and heavy dress, add 2~3 pieces of clothes into
the tub to relieve shock.
30
VARIOUS FUNCTIONS
CHILD LOCK FUNCTION Child lock can be set to prevent children from getting
into the tub. The door will be locked if the child lock function was settled.
Method of Setting: After pressing POWER button to power on, press TEMP button
for over 4 seconds, until a sound from buzzer. Follow the same instruction
listed above to unlock the door.
31
NO TROUBLE CONDITIONS
SITUATION
REASON
The washer door · The washer is in operation.
can not be opened. · Set by the child lock.
· There are clothes caught between the seal ring
and the door.
Peculiar smell.
· Some components are made by rubber, so there
may be smell of rubber.
Little water in wash · Drum washing machine need only little water to
and spin.
wash clothes.
No water inflow. · Whether the faucet is open.
· Whether the Water Supply Hose be frozen.
· Whether the Water Supply Hose or the metal filter
in water inlet be blocked.
Inflow of water
· Water will be supplied automatically when the
during operation.
water level decline.
· Add clothes during operation.
Drainage water in · Whether there is too much detergent, or
during washing.
detergent with too much bubble.
Remaining time
· If the clothes are uneven distributed, water will be
changes.
added to balance it.
· The displayed remaining time is calculated on the
basis of 15 liter/minute water intake. As the water
pressure will change, actual time will be
prolonged or shortened accordingly.
· If clothes are biased in spin, the spin time will be
prolonged to correct the biasing.
Abnormal sound in · Check if power cord contact the machine body.
spin process.
· Check if the fixing (bolts) has been removed.
32
Program stops when power off.
· Check if there are any barrettes or metal articles inside.
· If power off, the program stops and will not continue when power on, please
press he POWER ON/OFF button and re-set the program.
33
TROUBLE SHOOTING GUIDE
Trouble Indication
Kind Of
Where to Check
How to resolve
Trouble
the problem
The washer · Check if the Power Cord
does not
is securely plugged in.
work at all. · Press the Power ON/OFF
button.
· Press the START/PAUSE
button.
· Press the PRESET button.
· Check whether power
failure occurs.
· Check whether the fuse
or circuit breaker has
been activated.
Water does · Whether the faucet be Check and
not flow
opened.
resolve the
into the
· Whether the Water
problem, then
Wash/Spin Supply Hose be frozen. press
Tub or
· Whether the Water
START/PAUSE
water flow Supply Hose or the metal once to restart
is slim.
filter in water inlet be
the washer.
blocked.
· Whether the water is out
of supply.
Water does · The height of drain hose Check and
not drain
is more than 100mm. resolve the
out.
· Whether the Drain Hose problem, then
is inverted.
press
· Whether the Drain Hose START/PAUSE for
is blocked by scrap of one times to
34
Failure to open the washer door.
Failure to spin
Door is not closed
fiber. · Whether the Drain Hose
is too long. · Whether the
temperature of water exceeded 40°C. · Whether the temperature of water in
washing process exceeded 40°C. · Whether the washing machine be posited
steadily. · Whether the washing clothes is too big or too heavy. · Whether the
pieces of clothes for spin is too few. · Whether the blanket be rolled into a
ball.
restart the washer.
The door will open automatically as soon as the temperature below 40°C.
When the clothes is too little, add 2~3 pieces of clothes, then check the
machine, Close the door, and press START/PAUSE button for one times to restart
the machine. Close the door with the “door lock” light on, and then press
“START/PAUSE” button, the machine will run.
35
36
Warranty Terms & Conditions
Flipkart India Private Limited (“Company”) warranties the product to be free
from manufacturing defects or any other specific defect as may be specified in
the Specific Terms and Conditions below. The warranty is for a period
mentioned in the Specific Terms and Conditions below, the invoice (if not
specified in the Specific Terms and Conditions below), as well as the product
listing page, and such period shall commence from the date of purchase of the
product by the first end user. This is a non-transferable warranty, valid only
in the territory of India and extended only to the first end user customer
(“Customer”) basis the following terms and conditions, which the Customer is
deemed to have accepted upon purchase of the product
The warranty period of the product is 1 year, commencing
from the date of purchase. Warranty service which includes
replacement or repairs, will be carried out through the Authorised
Service Centers (“ASC/s”) only.
Warranty will be valid only when the original purchase
invoice is presented at the time of service. Company reserves the right
to decline warranty service, if the purchase invoice is not presented.
In case of commercial usage of the product, warranty
period would be limited to 90 days only.
Warranty will cover only functional parts, issues having
manufacturing defects and does not cover damages to the product
resulting from unauthorised adaptations/ adjustments/ tampering /
repair, improper installation or placement, mishandling, improper
use, deviation from the instructions set out in the user manual (if
applicable) normal wear and tear caused due to use of the product.
37
Warranty does not cover any external accessories and
fittings to the product.
All plastic, rubber, glass, or aesthetic parts and consumable
replacements will be on a chargeablebasis.
Warranty shall not apply to damages caused to the
product by accident, voltage fluctuations, lightening, ingress of
water (beyond certified limits, if any), fire or any other natural
calamity, improper ventilation, dropping or excessive shock, or any
external cause beyond Company’s control.
Company is not liable to provide repair services or spare
parts after the period of warranty expires and the same if provided
will be on a chargeable basis.
Whilst the Company, through its ASC, shall make every
effort to carry out the service at the earliest, it is expressly clarified
that the Company is under no obligation to do so within a certain
time period.
Whilst Company would take all necessary steps to repair
the product under warranty and maintain sufficient stock of the
spare parts of the products, in certain cases, at its sole discretion,
Company may due to non-avail- ability of spare parts of the product
or product being in a state which is beyond economic repair, offer a
replacement scheme to the Customer. The terms of such
replacement offer is subject to change from year to year and shall also
be applicable on the maximum retail price of the product.
38
All transportation & handling expenses incurred while
replacing or repairing will be payable by the Customer.
For any warranty claim requested by the Customer from
the region beyond municipal limits of the jurisdiction of the ASC, a
visit by an authorised service personnel may be arranged by the
Company through its ASC, on a case to case basis, at its sole discretion
and the charges towards such visit will be borne by the Customer.
Warranty shall be void if: The type or serial no. on the
product has been altered, removed or defaced. The product is not
operated as per the instructions given in the User Guide, if any. The
defects are caused by household pets, rats, cockroaches or any
other animals or insects.
The warranty automatically expires after the period of time
stated in the product invoice even if the product may not be in use
for any time for whatever reasons.
This Warranty shall not affect Customer’s statutory rights
under any applicable law.
Customer agrees to indemnify and keep Company harmless
against all damages, liabilities, costs, expenses, claims, suits and
proceedings (including reasonable attorney’s fee) that may be suffered
by the Company as a consequence of: (i) violation of these terms and
condition by the Customer;
(ii) Violation of applicable laws by the Customer; (iii) any action or
inaction resulting in willful misconduct or negligence on the customer’s part.
39
In the event of repairs of any part (s) of the product, the
Warranty will thereafter continue and remain in force only for the
unexpired period of the Warranty. Moreover, the time taken for
repair and in transit whether under the Warranty or otherwise shall
not be excluded from the Warranty period.
None of the employees, sellers, dealers or ASCs of the
Companyhave the authority to vary these terms and conditions.
Customer agrees that the courts at Bangalore shall have the
exclusive jurisdiction to settle any dispute that may arise in relation
to this Warranty or these terms and conditions.
COMPANY SHALL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL,
PUNITIVE, EXEMPLARY, SPECULATIVE OR CONSEQUENTIAL DAMAG- ES,
INCLUDING, BUT NOT LIMITED TO, ANY LOSS OF USE, BUSINESS
INTERRUPTION, AND LOSS OF INCOME OR PROFITS, IRRESPECTIVE OF
WHETHER IT HAD AN ADVANCE NOTICE OF THE POSSIBILITY OF ANY SUCH
DAMAGES.
For any further information / assistance please contact our
customer Redressal cell at:
Consumer Care Officer, Flipkart India Private Limited, Buildings Alyssa, Begonia & Clove
Embassy Tech Village, Outer Ring Road, Devarabeesanahalli Village
Bangalore, Karnataka-560103 India
Tel. no. : 080-46331090 Email – support.moto@flipkart.com
40
KEEP OUT OF REACH OF CHILDREN Children should be supervised to ensure that
they do not play with the appliance.
41
42
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>