ULINE Single Sided Grid Bike Rack User Guide
- June 7, 2024
- ULINE
Table of Contents
ULINE Single Sided Grid Bike Rack User Guide
TOOL NEEDED
- 9/16″ Wrench
PARTS
-
Leg x 2
-
Grid Section x 1
-
Pole x 1
-
Locknut x 6
-
Bolt x 6
ASSEMBLY
-
Insert bolt upward through hole in leg and pole. Fasten loosely with locknut. Repeat by attaching other leg to pole. (See Inset A)
-
Insert bolt through hole at the top of the leg and end of grid. (See Inset B)
NOTE: Grid can only be positioned one way for mounting. The holes on top are drilled diagonally through the tube at a slight downward angle. -
Fasten loosely with locknut. Repeat by attaching other leg to grid.
-
Align bottom holes of grid with middle hole of legs. Insert bolt upward and fasten loosely with locknut. Repeat by attaching other leg to grid. (See Inset C)
-
Complete assembly by tightening all bolts.
Contact Us
Phone: 1-800-295-5510
Web: uline.com
