ULINE H-5659 4 Gallon Bench Top Poly Corrosive Cabinet User Guide
- June 7, 2024
- ULINE
Table of Contents
ULINE H-5659 4 Gallon Bench Top Poly Corrosive Cabinet
Parts
REF
|
QTY
|
DESCRIPTION
---|---|---
1
|
1
| Base Panel with Hinge Pins
2
|
1
| Back Panel with Vents
3
|
1
| Side Panel
4
|
1
| Side Panel with Hasp
5
|
1
| Front Door Panel
6
|
2
| Shelf Panel
7
|
1
| Top Panel with Hinge Pins
|
4
| Peel and Stick Non-Skid Pads
|
1
| Door Label (Not Shown)
ASSEMBLY
NOTE: You will have the choice of assembling a left hinge or right hinge
door cabinet.
NOTE: Images show building of a left hinge door cabinet.
-
Place base panel (1) on level surface facing side D.
-
Slide back panel (2) into slot A and snap into place.
-
Left hinge door – Slide side panel (3) into slot C and snap into place.
Right hinge door – Slide side panel with hasp (4) into slot C and snap into place.
-
Left hinge door – Slide side panel with hasp (4) into slot B and snap into place.
Right hinge door – Slide side panel (3) into slot B and snap into place.
-
Left hinge door – Place front door panel (5) bottom hole onto left base hinge pin with handle on the right side when facing side D.
Right hinge door – Place front door panel (5) bottom hole onto right base hinge pin with handle on the left side when facing D.
-
Line up top panel (7) hinge pin with top hole in front door panel (5). Snap top down onto panels (2, 3 and 4).
-
Place two shelf panels (6) flat side up onto shelf supports on the back and side panels within the cabinet. One shelf can be placed over sump area.
-
Peel backing from non-skid pads and place under each corner of base (1). Cabinet is completed.
-
(Optional) Peel and stick door label.