ULINE Storage Shop Desk User Guide
- June 7, 2024
- ULINE
Table of Contents
H-7646, H-7647 H-7648, H-7649
STORAGE SHOP DESK
1-800-295-5510
uline.com
TOOLS NEEDED
ASSEMBLY
CABINET ASSEMBLY
- Using a 10 mm wrench and Phillips screwdriver, assemble the back panel and left and right side panels together with twelve M6 flange nuts and Phillips head bolts. (See Figure 1)
- Using 10 mm wrench and Phillips screwdriver, assemble front and back support with eight Phillips head bolts and M6 flange nuts. (See Figure 2)
- Remove drawer from the desktop. Place desk top on a smooth, non-marring surface with the top side facing down. Flip base frame upside down and place onto the desktop. Using a 10 mm wrench and Phillips screwdriver, fasten the desktop to the frame with 16 Phillips head bolts and M6 flange nuts. (See Figure 3)
- Set desk top assembly upright and recheck all screws and nuts for tightness. (See Figure 4)
**TOP SHELF ASSEMBLY
**
PEDESTAL AND DRAWER INSTALLATION
- Place top shelf on desktop and assemble with six Phillips head bolts and M6 flange nuts. (See Figure 5)
PEDESTAL AND DRAWER INSTALLATION
- Insert two pedestals on top of front and back supports. (See Figure 6)
- Open top pedestal drawer and/or cabinet door of both pedestals. Using a 9/16″ wrench, attach pedestals to frame with pedestal bracket, two 3/8-16 x 3/4″ hex bolts, and two 3/8-16 flange nuts. (See Figure 7)
- Insert drawer into the desktop. (See Figure 8)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>