ULINE S-18738/S-18739/S-18740/S-18741/S-18742/S-18743 Instant Bubble Film Instruction Manual

ULINE S-18738/S-18739/S-18740/S-18741/S-18742/S-18743 Instant Bubble

FILM CODE SETTINGS AND DIAGRAM

FILM CODE SETTINGS

ITEM NO.| DIMENSIONS| FILM CODE

S-19738

| Medium Premium (1/2″ inflated) 12″ x 2,050′ Perf 12″|

RK8R

S-19739

| Medium Premium (1/2″ inflated) 24″ x 2,050′ Perf 12″|

RK8G

S-19740

| Large Premium (3/4″ inflated) 12″ x 1,250′ Perf 12″|

NJ8R

S-19741

| Large Premium (3/4″ inflated) 24″ x 1,250′ Perf 12″|

NJ8K

S-19742

| XL Premium (1″ inflated) 12″ x 1,167′ Perf 12″|

AO8C

S-19743

| XL Premium (1″ inflated) 24″ x 1,167′ Perf 12″|

AO8Q

NOTE: The factory default film code setting is S-19740, film code NJ8R.

INSTRUCTIONS

CHANGE THE FILM CODE SETTINGS

1. Press the up and down arrows and the reset button at the same time to access the menu. ( See Figure 1 )

2. Use the arrow buttons to move the cursors on either side of the screen to Engineering. Press the select button on the left to select Engineering. ( See Figure 2 )
   

3. Use the arrow keys to move the cursor to Film Type. Press the select button on the left to select Film Type. ( See Figure 3 )
   

4. Use the arrow keys and select button to set each digit to match the film code for the corresponding item number. After the last digit has been set, press the select button to save the film code. ( See Figure 4 )
   

1-800-295-5510
uline.com

Documents / Resources

| ULINE S-18738/S-18739/S-18740/S-18741/S-18742/S-18743 Instant Bubble Film [pdf] Instruction Manual
S-18738, S-18739, S-18740, S-18741, S-18742, S-18743, Instant Bubble Film
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>