UNITECK CO00422 LED Spotlight Instruction Manual
- June 14, 2024
- UNITECK
Table of Contents
UNILEDBAR
18.24 / 36.24 / 54.24
LED spotlight
p.8-13
Dear customer, we thank you for purchasing one of our Uniteck products. Please read all instructions carefully before using this product.
DESCRIPTION
UNILEDBAR is the last generation high-performance 12/24V spotlight led range.
Made with the best led-technology of the market in reference to their lighting
quality and their lifespan (CREE Led – USA).
UNILEDBAR generates a consistent luminous beam similar to the natural
brightness.
The visual field is completely lighten up, which offers perfect visibility
while avoiding ocular fatigue.
Waterproof (IP67) and corrosion-resistant (aluminum structure, inox mounting
brackets, …), UNILEDBAR is made for all outdoor uses even the most challenging
(boating, campervan, truck, …).
SAFETY INSTRUCTION
- Take the appropriate measures to prevent accidents during your mounting steps.
- If the mounting bracket and the mounting tools are exposed to sunlight for a long period, there is a risk of getting burnt. Make sure to protect yourself accordingly.
- When finished, check and ensure that all of your Led spotlight are fixed properly.
DO NOT LOOK DIRECTLY INTO THE LENS. This can damage your eyes. Persons who are subject to epileptic attacks should be aware of the effects that this light effect may have on them.
MOUNTING
RECOMMANDATIONS
Mount UNILEDBAR led spotlight only on surfaces with sufficient bearing
capacity.
| Product | Dimensions LxWxH | Weight kg |
|---|---|---|
| UNILEDBAR 18.24 | 99x73x107 | 0,8 |
| UNILEDBAR 36.24 | 167x73x107 | 1,1 |
| UNILEDBAR 54.24 | 235x73x107 | 1,4 |
Fastening :
Choose the most optimal inclination and orientation to suit your environment.
Fixing is possible thanks to the screws, washers and brackets supplied with
the product.
WIRING
Installation is made easier thanks to the 1.5m cable supplied as standard
(stripped).
UNILEDBAR can operate either :
- On a 12V battery pack
- On a 24V battery pack
- On a DC power supply between 9V DC and 30V DC
- Red cable to be connected to the + terminal
- Black cable to be connected to the – terminal
TROUBLESHOOTING, CAUSES, SOLUTIONS
| Error message | Causes | Solution |
|---|---|---|
| The LED projector does not turn on. | Battery charge < 9V | Charge your battery. |
The LED projector works when the battery is charged
to at least 9V.
TECHNICAL SPECIFICATIONS
| SYSTÈM | UNILEDBAR 18.24 | UNILEDBAR 36.24 | UNILEDBAR 54.24 |
|---|---|---|---|
| Technology | LED | ||
| Input voltage | 10 – 30V DC | ||
| Power | 18W | 36W | 54W |
| BATTERY | |||
| Voltage | 12 ou 24V | ||
| LIGHT | |||
| Leds | CREE Leds – USA | ||
| Number of leds | 6 x 3W | 12 x 3W | 18 x 3W |
| Lumens | 1260 lm | 2520 lm | 3780 lm |
| Beam | Large 60° | ||
| Light colour | Cold white 6000K | ||
| Lifespan | >50 000 hours | ||
| MECHANICAL CHARACTERISTICS | |||
| Dimension in mm (LxWxh) | 99 x 73 x 107 | 167 x 73 x 107 | 235 x 73 x 107 |
| Weights | 0.8 kg | 1.1 kg | 1.4kg |
| Materials | |||
| Lens | Polycarbonate | ||
| Structure – Heatsink | Aluminum 6063 | ||
| Mounting bracket | Inox 316L | ||
| Cable | |||
| Length | 1,5 m | ||
| Type | H05-RNF | ||
| Section | 2 x 0,75mm² | ||
| International Protection Rating | IP67 |
POWER, FLUX AND LUMINOUS ANGLE
| UNILEDBAR 18.24| UNILEDBAR 36.24| UNILEDBAR 54.24
---|---|---|---
Angle (degrees)| 19,92°| 20,82°| 20,76°
Illuminance (lux)
according to the
distance
5m
6m
7m
8m
9m
10m
15m
20m
25m| Aver.
79
54,8
40,3
30,8
24,4
19,7
8,8
4,9
3,2| Max
114
79,6
58,5
44,8
35,4
28,6
12,7
7,2
4,6| Ø (cm)
175,6
210,8
245,9
281
316,1
351,3
526,9
702,5
878,1| Aver.
164
113,9
83,7
64,1
50,6
41
18,
10,2
6,6| Max
243,8
169,3
124,4
95,2
75,2
60,9
27,1
15,2
9,7| Ø (cm)
183,7
220,5
257,2
294
330,7
367,5
551,2
735
918,7| Aver.
230
160
117,5
90
71,1
57,6
25,6
14,4
9,2| Max
314
237,1
174,2
133,3
105,4
85,3
37,9
21,3
13,6| Ø (cm)
183,2
219,8
256,5
293,1
329,8
366,4
549,6
732,8
916
COMPLIANCE STATEMENT
UNITECK testifies that the LED spotlights described in this manual are
manufactured in compliance with the following European directives:
– EMC electromagnetic compatibility standard
– E-mark R10
They comply to the harmonized standards:
– EN 55015 : 2013
– EN 61547 : 2009
– EN 61000-3-3 : 2006 + A1: 2009 + A2 : 2009
– EN 61000-3-3 : 2013
CE date of tagging: january 2020.
UNITECK
1 Avenue de Rome
Immeuble cassis
ZAE via Europa
34500 Vendres
FRANCE
Yoann Fourmond
General Director
WARRANTY
Warranty covers any defect, manufacturing defects for 1 year from the date of
its purchase (parts and labour).
Warranty does not cover:
– normal wear of parts (Ex.: cables, etc.).
– panel-module/battery voltage errors, incidents due to inappropriate use,
fall, disassembly or any damages due to transport.
In case of failure, return the product to your distributor by attaching:
– the dated proof of purchase (receipt, bill…)
– explanatory note of the failure
Caution: Our after-sales service does not accept carriage forward/ collected
returns.
After the warranty, our after-sales service ensures repairs after acceptance
of a quotation.
After-sales service contact :
Uniteck- 1 Avenue de Rome
Zae Via Europa – Immeuble le Cassis
34350 Vendres -France
E-mail : sav@uniteck.fr
www.uniteck.fr19
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>