CyberPower MP1058SSW 6 Outlet Surge Protector User Manual
- June 3, 2024
- CyberPower
Table of Contents
CyberPower MP1058SSW 6 Outlet Surge Protector
FEATURES
- Surge Protected Indicator LED Illuminated when the surge protection feature is working properly.
- Grounded Indicator LED Illuminated when a properly grounded AC outlet is detected.
- Standard Grounded Tamper-Resistant Outlets (6) Prevents accidental electrical shock by blocking foreign objects from entering the open spaces with internal shutters.
- Pivoting Outlets Pivoting outlets for ease of use and convenience.
- USB Ports (2) Connect and charge up to two USB devices using the surge protected USB charging ports. USB outlets cannot be used as a USB hub. This device does not transfer data.
SPECIFICATIONS
- Model Number : P6WSUCPD
- Outlets : 6 Standard Grounded Outlets,
- 1 USB -A, 1 USB-C Charging Port
- Surge Protection: 2,000 Joules
- Electrical Rating : 125 V/15 A/1875 W
- USB-A OUTPUT : 5 V/2.4 A Max
- USB-C OUTPUT : 5 V/3 A Max, 9 V/2.22 A Max
- USB Charging Output : 20 W
- UL Clamping Voltage: UL 1449 4th/600 V (L-N, L-G, N-G)
- Maximum Peak Current: 60,000 A
- 3 AC Lines Protected: L-N : 30,000
- A ; L-G: 15,000 A;
- N-G : 15,000 A
- Response Time : Less than 1 nanosecond
- Attenuation: Up to 32 dB
- EMI/RFI Filtration : 150 kHz to 100 MHz
WARNING : This product can expose you to chemicals including bisphenol A (BPA) and styrene (ABS), which is known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov.
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK: Use only in dry locations and only
indoors. DO NOT plug into another relocatable power tap. DO NOT “daisy chain”
surge protectors. DO NOT use with any aquarium equipment. DO NOT use if
properly grounded outlets are not available. DO NOT install this device if
there is not at least 10 meters (30 feet) or more of wire between the
electrical outlet and electrical service panel. DO NOT use for medical or life
support equipment. This device features an internal protection that will
disconnect the surge protective component at the end of its useful life, but
it will maintain unprotected power to the load.
TROUBLESHOOTING
If the grounded indicator does not light when you plug in the surge protector,
move the surge protector to a different grounded three-prong AC outlet. If it
still does not light, return the product to the retailer for assistance. If
the surge protector appears to be working properly, your outlets may not be
properly grounded and need to be repaired by a professional electrician.
If the protected indicator does not light, the surge protector’s AC lines are
no longer protected from surge. The surge protector may have received a power
surge or spike beyond its specified limits that overloaded the protection
circuitry and rendered it inactive. The surge protector has protected your
connected equipment as designed, but it will not protect against future
surges, and spikes. It should be replaced.
FOR MORE INFORMATION
Visit CyberPowerSystems.com for more information regarding: · Product
information and certifications · Product warranty · Connected equipment
guarantee
TECHNICAL SUPPORT
Visit:
CyberPowerSystems.com/support
Toll-Free : 1-877-297-6937
Hours of Operation: Monday – Friday: 7:00am – 6:00pm CST © 2021 Cyber Power
Systems (USA), Inc. All rights reserved. All other trademarks are the property
of their respective owners.
CONFORMANCE APPROVALS
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. This equipment has
been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment on and off, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Cyber Power Systems (USA), Inc. 4241 12th Avenue East, Suite 400 |
Shakopee, MN 55379
CyberPowerSystems.com
References
- CyberPower UPS Systems, Battery Backup, PDUs, USB Surge Protectors
- Support | CyberPower
- P65Warnings.ca.gov
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>