WILLIAMS-SONOMA Anton 68 Bathroom Vanity Instruction Manual

WILLIAMS-SONOMA Anton 68 Bathroom Vanity

Product Information

The product is a vanity console manufactured by Williams-Sonoma Inc. It is designed to be assembled and mounted to both the wall and floor. Please note that some additional hardware items, such as shims, spacers, high-quality silicone or acrylic-based bath
sealant, are not included. It is important to avoid using plumbers’ putty or any oil-based sealant as it may stain the marble. Some cutting of the baseboard and drilling may be necessary to properly mount the console base to the wall. Before assembly, please ensure you have the necessary tools required for the installation. The box contents include various components labeled A, B, C, D, EC, F, G, H, and I. If the console is purchased without a countertop, refer to page 17 of the instructions for recommended custom countertop dimensions.

Product Usage Instructions

1. Secure the vanity console to the wall using the appropriate hardware. Consult your local hardware store for assistance in selecting the right hardware for your wall type.
2. Measure the location of the plumbing in the wall and mark the back panel of the console accordingly.
3. Cut holes in the back panel to allow the plumbing to pass through.
4. Position the base of the console against the wall in the desired placement. Use a sharp pencil or a screw to mark the wall through the holes on the top rail.
5. If necessary, drill new holes in the top back rail of the vanity to align with the wood studs.

Please note that these instructions are provided as a general guide. Always refer to the specific assembly instructions provided in the user manual for detailed step-by-step guidance.

PROFESSIONAL INSTALLATION REQUIRED – CONTRACTOR AND PLUMBER needed for

Installation

• Please read all instructions carefully before assembling.
• For your safety, assembly by two or more adults is strongly recommended.
• Keep instructions for future use.
• Use only vendor-supplied hardware to assemble. Using unauthorized hardware could jeopardize the structural integrity of the item.
• The Vanity Base must be secured to the wall. Wall attachment hardware is not included. For safe mounting, it is essential to use the proper hardware for your wall type. If walls are drywall or wood studs, concrete, brick, or plaster, please consult your local hardware store for assistance in selecting the appropriate hardware.
• Note: Consoles usually need to be leveled and mounted to both wall and floor. Some hardware items needed for proper assembly and installation are not included: ex. shim, spacer, high-quality silicone or acrylic-based bath sealant, etc.
• DO NOT USE THE PLUMBER’S PUTTY OR ANY OIL-BASED SEALANT AS THIS WILL STAIN THE MARBLE.
• Note: Some cutting of the baseboard, and drilling may be necessary to mount the console base to the wall.

PRE-ASSEMBLY

• Remove all parts and hardware from the box and layout on a clear carpeted or scratch-free work surface, as this will avoid damaging parts during assembly. The shipping box provides an ideal work surface.
• Do not dispose of any packaging or contents of the shipping carton until assembly is completed to avoid accidentally discarding small parts or hardware.
• Use the parts and hardware lists below to identify and separate each of the pieces included.
• The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.
• The use of power tools to aid in assembly is not recommended. Power tools can damage hardware and split wood.
• Keep all parts out of the reach of children.
• A standard 8″ spread faucet should be used with this Marble top console.

Note: Consoles usually need to be leveled and mounted to both wall and floor. Some hardware items needed for proper assembly and installation are not included: ex. shim, spacer, high-quality silicone or acrylic-based bath sealant, etc.
DO NOT USE THE PLUMBER’S PUTTY OR ANY OIL-BASED SEALANT AS THIS WILL STAIN THE MARBLE.
Note: Some cutting of the baseboard, and drilling may be necessary to mount the console base to the wall.

Tool Required (NOT INCLUDED / NON-INCLUS / NO INCLUIDAS)

BOX CONTENTS

Tool Included

THE VANITY MUST BE SECURED TO THE WALL

NOTE: For safe mounting, it is essential to use the proper hardware for your wall type. The hardware is not included, please consult your local hardware store for assistance in selecting the appropriate hardware. Mount to wood studs whenever possible. Measure the location of the plumbing locations in the wall. Mark the back panel of the case corresponding to the location of the plumbing. Cut holes in the back panel for the plumbing to pass through. Move the BASE to the desired placement against the wall. Use a sharp pencil or a screw to mark the wall through the holes on the top rail.
NOTE: New holes can be drilled in the top back rail of the vanity to properly align with the wood studs.

Tools Required (not included)

To Seal The Connection Between The Basin Edge And The Bottom Of The Stone Top. Caulking must be Silicon or Acrylic based.

Plumbers putty must not be used as it will stain the stone top.

To Seal The Connection Between The Bottom Of The Stone Top And The Top Of The Wood Vanity Top. Caulking must be Silicon or Acrylic based.

Plumbers putty must not be used as it will stain the stone top.

If purchased with No Countertop, see below recommended custom countertop dimensions

2020 Williams-Sonoma, Inc.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>