Shenzhen HB9909 Smart Locator User Manual
- September 12, 2024
- Shenzhen
Table of Contents
Shenzhen HB9909 Smart Locator
Specifications
- Supported Devices: iPhone, iPad, Mac, Apple Watch
- Recommended Software Versions: iOS, iPadOS, macOS, watchOS
- Functionality: Locate compatible personal items using the Apple Find My network
- Compliance: Works with Apple badge certification
Product Usage Instructions
- Check For Updates: Ensure your iOS, iPadOS, or macOS is up to date.
- Power On: Press the button on the item locator to power it on and enter pairing mode.
- Start the App: Open the Find My app on your supported iPhone or iPad.
- Connect Your Item Locator:
- Choose the Items tab and tap on Add Item or tap the + icon directly.
- Select Other Supported Items.
- Ensure the Item Locator is near your phone, wait for HB02 to appear, then tap Connect.
- Follow the on-screen instructions to name your item and select an emoji.
- Complete the setup process by tapping Finish.
- Your iPhone will notify you if an unknown Item Locator is detected traveling with you. An alert sound will help you locate it. These alerts are activated when the Item Locator is not connected to your phone.
- Keep the battery away from children to prevent serious injury or death if swallowed. In case of accidental ingestion, seek immediate medical assistance.
- Any modifications not approved by the responsible party may void the user’s authority to operate the equipment. This device complies with FCC rules regarding interference and radiation exposure limits.
FAQ
- Q: What should I do if I receive an unwanted tracking detection alert?
- A: If your iPhone alerts you about an unknown Item Locator, follow the sound to locate it. Ensure it is not connected to your phone to trigger the alert.
- Q: How can I ensure the safety of the battery in the item locator?
- A: Keep the battery out of reach of children to prevent accidental swallowing, which can lead to serious injury or death. Seek medical help immediately if ingestion occurs.
Manual
- Apple, Apple Find My, Apple Watch, Find My, iPhone, iPad, iPadOS, Mac, macOS, and watchOs are trademarks of Apple lnc. iOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.
- The Apple Find My network provides an easy, secure way to locate compatible personal items using the Find My app on your iPhone, iPad, or Mac, or the Find Items app on Apple Watch.
- To use the Apple Find My app to locate this item, the latest version of iOS, iPadOS, or macOS is recommended. The Find Items app on Apple Watch requires the latest version of watchOS.
- Use of the Works with Apple badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My Network product specifications and requirements.
- Apple is not responsible for the operation of this device or use of this product or its compliance with safety and regulatory standards.
Getting Started
Check For Updates
- To use the Apple Find My app to locate your Item Locator, the latest version of iOS, iPad OS, or macOS is recommended.
Power On
- Press the button on the item locator, it should beep once indicating it is powered on and will be in pairing status.
Add Your Item Locator
Start the APP
- Open Find My APP on your supported iPhone or iPad.
Connect your Item Locator
-
Step 1. Choose the “Items” tap and then tap on “Add Item”. Or, tap on the “+” icon directly.
-
Step2. Tap “Other Supported Items”.
-
Step3. Make sure your Item Locator is close to your phone. Wait… until you see ““HB02””, then tap “Connect”. Follow the pop-up to fill name and select an emoji; then tap.
“Continue”.
There will be a request to add your Item Locator to your ID, then tap
“Continue”. Tap “Finish” and your Item Locator will be set up.
FCC Caution
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
Function Introduction
Locate your Item
- Find Item Locator
- Tap “Play Sound” to make your Item Locator beep when it is nearby.
- Find your Item Locator’s location
- Your Item Locator’s last known location will appear on the map as emoji you choose during set up, tap “Directions” to navigate to the last known location.
Find Item When Out of Range
- Enable the “Notify When Left Behind” toggle, you will receive a notification when you leave your Item Locator behind and it is no longer in range of your device.
- Enable the “Notify when Found” toggle, when your Item location is seen by another Find My enabled device, you will receive a notification of its updated location.
- Note: ” Notify When Found” can only be activated when your Item Locator is out of range.
When Your Item is Lost
- When Your Item is Lost Under “Lost Mode”, tap the “Enable” tab, a screen detailing Lost Mode will pop up, tab “Continue”. You can enter your phone number or email address and tap “Next”. You may enter a message that will be shared with the person that finds your item. Tap “Activate” to enable “Lost Mode”
- Note: When “Lost Mode” is enabled, “Notification When Found” is automatically enabled.
- Note: When “Lost Mode” is enabled, your Item Locator is locked and cannot be paired to a new device.
Remove your Item Locator
- Ensure “Lost Mode” is disabled, tap the “Remove Item” tab, a summary will open, tap “Remove” to confirm.
Reset your Item Locator
- After successfully removing the Item Locator from the APP, press the Item Locator’s function button four times rapidly, and then hold it a fifth time until you hear a ringing chime, the Item Locator is now reset and ready to pair to a new device.
How to replace the Battery
- Use the opening tool to carefully open the case in the small gap on the side of the item finder.
- Replace the battery with a new CR2032 battery 3V. (Positive pole upward).
- Carefully close the Item Locator.
Unwanted Tracking Detection
If your iPhone detects that an unknown Item Locator is traveling with you, it
will send you a notification. A sound will start playing so you will be able
to find it. These alerts are only activated when an Item Locator is not
connected to its owner’s phone, so your partner’s Item Locator will not
trigger a sound if they are with you.
FCC STATEMENT
IMPORTANT NOTE
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, according to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Button Function
-
Power on (Findmy function is on).
Press the button once to turn it on. it should beep out a ringing chime indicating it is powered on.
If the product is not paired, it will be closed within 3 minutes.
You need to trigger the findmy function again to continue pairing. -
Power off (Findmy function is off).
Hold the button for 3 seconds, release your hand on time, hear two beeps indicating it is powered off. -
Enable learn more information query.
Press the button two times rapidly and you will hear a confirmation sound,This operation will be displayed on the findmy app to guide the person who gets the device to obtain the device information, such as the owner’s contact information (if the item is set to the lost mode on the app), and the serial number of the device. -
Factory reset
Press the button 4 times rapidly and then hold it a fifth time until you hear a ringring chime.
A reset operation is required to enable the device to enter the pairing state again (synchronization of Findmy also requires simultaneous unbinding) and rebind the new Apple ID account.
Important tips
- When pairing a device with Find My app, the phone will link to the Apple server. Pairing may fail because of network problems. The following action is recommended: 1. Change the phone’s network, such as switching between WiFi and mobile. The first pairing may takes a long time, please wait patiently. 2. Reset your item. 3.Repair with Findmy APP.
- When “Lost Mode” is enable, DO NOT REMOVE ITEM in the APP. Your Item Locator will be locked and cannot be paired to a new device.
- The battery usage time varies depending on personal usage habits.
Frequent use of the call function can accelerate battery consumption.
Regulatory Safety Information
Warning: The battery must be kept out of the reach of children. Due to chemical burns and potential esophageal perforation, swallowing may cause serious injury or death. If the child accidentally swallows the button battery, please call the rescue phone immediately and seek medical advice in time.
WARNING
- INGESTION HAZARD: This product contains a button cell or coin battery.
- DEATH or serious injury can occur if ingested.
- A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours.
WARNING
- KEEP new and used batteries OUT OF REACH of CHILDREN
- Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.
WARNING
- KEEP OUT OF REACH OF CHILDREN Swallowing can lead to chemical burns, perforation of soft tissue, and death.
- Severe burns can occur within 2 hours of ingestion.
- Seek medical attention immediately.
Keep in original package until ready to use;
Immediately dispose of used batteries and keep them away from children.
Do NOT dispose of batteries in household trash.
WARNING
- Remove and Immediately recycle or dispose of used batteries according to local regulations and keep them away from children. Do NOT dispose of batteries in household trash or incinerate them.
- Even used batteries may cause severe injury or death Call a local poison control center for treatment information.
- Non-rechargeable batteries are not to be recharged.
- Do not force discharge, recharge, disassemble, heat above 50°C/122°F or incinerate. Doing so may result in injury due to venting, leakage, or explosion resulting in chemical burns.
- The compatible battery type is CR2032.
- The nominal battery voltage: DC 3V
Ensure the batteries are installed correctly according to polarity(+ and -).
Do not mix old and new batteries, different brands, or types of batteries,
such as alkaline, carbon-zinc, or rechargeable batteries.
Remove and immediately recycle or dispose of batteries from equipment not used
for an extended period according to local regulations.
Always completely secure the battery compartment.
If the battery compartment does not close securely, stop using the product,
remove the batteries, and keep them away from children.
WARNING: This product contains a button cell or coin battery.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>