ULINE H-7460 Plastic AV Cart with Cabinet and Tray User Guide

June 7, 2024
ULINE

H-7460
PLASTIC AV CART WITH CABINET AND TRAY

1-800-295-5510
uline.com

ULINE H-7460 Plastic AV Cart with-

TOOLS NEEDED

ULINE H-7460 Plastic AV Cart with-tools

PARTS


ULINE H-7460 Plastic AV Cart with-parts 1
  ULINE H-7460 Plastic AV Cart with-parts 2

ASSEMBLY

ULINE H-7460 Plastic AV Cart with-figure 1| ULINE H-7460 Plastic AV Cart with-figure 2
---|---
ULINE H-7460 Plastic AV Cart with-figure 3| ULINE H-7460 Plastic AV Cart with-figure 4
ULINE H-7460 Plastic AV Cart with-figure 5| ULINE H-7460 Plastic AV Cart with-figure 6
---|---
ULINE H-7460 Plastic AV Cart with-figure 7| ULINE H-7460 Plastic AV Cart with-figure 8
ULINE H-7460 Plastic AV Cart with-figure 9| ULINE H-7460 Plastic AV Cart with-figure 10
---|---

KEYBOARD TRAY ASSEMBLY

  1. Place the top shelf upside down on a flat surface.
  2.  Insert small screws into the holes in the top shelf and right and left tray brackets. Use a Phillips screwdriver to fasten. Do not fully tighten.
  3.  Slide keyboard tray into tray brackets and snap into place. (See Figure 1)
  4. Pull the keyboard tray out to ensure it is properly installed.
  5. Tighten small screws. Set-top shelf and keyboard tray aside until later steps.

CART ASSEMBLY

  1. Tap the casters into the underside of the bottom shelf using a rubber mallet. Put two swivels with brake casters at the front of the cart and two swivel casters at the rear. (See Figure 2)
  2. Lock swivel with brake casters. Tap the large supports onto the top of the bottom shelf using a rubber mallet. (See Figure 3)
  3.  Slide the left and right side panels down into the large supports. (See Figure 4)
  4.  Slide the back panel into the large supports on the end of the cart with swivel casters. (See Figure 5)
  5. Slide the cabinet door down into the large supports. (See Figure 6)
  6. Tap the top of the middle shelf into the large supports using a rubber mallet. (See Figure 7)
  7.  Tap the small supports onto the top of the middle shelf with a rubber mallet. (See Figure 8)
  8. Tap the top of the top shelf into the small supports using a rubber mallet. (See Figure 9)

POWER STRIP ASSEMBLY

  1.  Insert large bolts through cord wrap bracket and holes in rectangular plate on the underside of top-shelf.
  2.  Secure large bolts with wing nuts and Phillips screwdriver. (See Figure 10)
  3. Snap power strip into the bracket.

1-800-295-5510
uline.com

0421 IH-7460

Documents / Resources

| ULINE H-7460 Plastic AV Cart with Cabinet and Tray [pdf] User Guide
H-7460, Plastic AV Cart with Cabinet and Tray
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals