ULINE H-5047 Appliance Hand Truck 2-Wheel User Manual
- June 7, 2024
- ULINE
Table of Contents
H-5047
APPLIANCE HAND TRUCK 2-WHEEL
SAFETY
WARNING! Check truck and all hardware for wear and tightness before use.
- Do not use if nylon belt is worn or cut.
- If the climber belt is worn, immediately remove the unit from service and repair it before use.
- Do not allow the belt to twist when securing the load.
- Firmly tighten the belt around the load before moving.
- Approach stairs or inclines with caution.
- Use only with assistance when going up or downstairs or inclines.
- Use extreme caution when moving on uneven floors.
OPERATION
-
Release the ratchet tightener, wrap the belt around the load, and secure the front clasp. Be sure to return the ratchet tightener to the locked position once the belt is clasped. (See Figures 1-2)
-
Use ratchet handle to tighten the belt and secure the load. (See Figure 2)
0421 IH-5047
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>