ULINE H-1978, H-8532, H-8577 Z-Rack Installation Guide
- June 7, 2024
- ULINE
Table of Contents
H-1978, H-8532 H-8577
Z-RACK
1-800-295-5510
uline.com
TOOLS INCLUDED
PARTS
ASSEMBLY
-
Remove the included washers and bolts from the frames, using the included 1/4″ Allen wrench. (See Figure 1)
-
Slide the frame and the frame crossbar together, aligning the bolt holes. (See Figure 2)
-
Insert bolts into aligned bolt holes, placing the washers between the frame and bolt. Tighten using included 1/4″ Allen wrench. (See Figure 3)
-
Place caster bumpers on casters with concave side toward the caster.
-
Align and insert casters with rubber bumpers. Tighten the nut on the opposite side using the included wrench. (See Figure 4)
-
Insert the vertical support bars into the frame. (See Figure 5)
-
Slide horizontal hang bar on the top of the vertical support bars and lock into place. (See Figure 6)
0421 IH-1978
Documents / Resources
|
ULINE H-1978, H-8532, H-8577
Z-Rack
[pdf] Installation Guide
H-1978, H-8532, H-8577, Z-Rack
---|---