ULINE 60″ Frame Extension for Magliner Aluminum Hand Trucks H-3377 Instructions
- June 7, 2024
- ULINE
Table of Contents
ULINE 60″ Frame Extension for Magliner Aluminum Hand Trucks H-3377
TOOLS NEEDED
3 Phillips Screwdriver
|
7/16″ Combination Wrench
|
Socket Wrench
---|---|---
PARTS
REF.
| QTY.|
DESCRIPTION
---|---|---
1
|
1
|
Frame Extension
Bolts and locknuts required for assembly are included with hand truck hardware.
ASSEMBLY
- Remove two 1/4″ – pan head bolts and two 1/4″ – locknuts from either side of the handle, leaving the handle in place. (See Figure 1)
- Place the legs of frame extension between the handle so the bottom of the legs rest on the top cross brace of the frame.
- Make sure the holes in the frame extension line up with the holes in the handle and frame side rails. (See Figure 1)
- Replace the 1/4″ – pan head bolts and 1/4″ – locknuts. Tighten locknuts. (See Figure 1)
Documents / Resources
|
ULINE 60" Frame Extension for Magliner Aluminum Hand Trucks
H-3377
[pdf] Instructions
60 Frame Extension for Magliner Aluminum Hand Trucks, H-3377, ULINE
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>