ULINE BT Pallet Truck Instructions
- June 7, 2024
- ULINE
Table of Contents
ULINE BT Pallet Truck Instructions
IMPORTANT!
Read this manual thoroughly and familiarize yourself with ALL controls and
operating features. Keep this manual for future reference and
maintenance.
OPERATIONS
NOTE: Always wear safety shoes when working with the truck.
NOTE: Always wear protective glasses when assembling or dismantling the truck to avoid personal injury.
NOTE: The truck must not be used if it is damaged or has any faults that affect safety or its safe use. Also do not use the truck if it has been repaired or adjusted unless it has been checked and approved by an authorized service technician.
OPERATING THE TRUCK
- The truck may be used only on a firm and even surface, such as concrete or asphalt.
- It is not permitted to use the truck: In areas where the atmosphere contains gases that can cause fire or explosion. In such environments, a special explosion-proof truck is required.
- To transport/lift passengers.
- In cold stores or salty and other corrosive environments.
- Use a stainless steel truck in this type of environment.
OPERATOR’S RESPONSIBILITY
- The truck shall only be driven with care, good judgement and in a responsible manner.
- The truck should not be driven with oily hands or oily shoes due to the risk of slipping.
- Never wear loose objects or jewelry when working on the truck.
WORKING AREA
- Ensure that the floor where the truck is to be used has sufficient load bearing capacity for the total weight of the truck including the maximum load.
- Take special care if there are protruding parts from racks, shelves or walls that can cause injury or damage the truck.
- It is prohibited for persons to be present in the area around the truck when there is a risk of personal injury, e.g. areas that can be reached by falling goods, lowering load handling devices or in the truck’s manoeuvring area.
OPERATIONS
SAFETY CONSIDERATIONS
- Avoid cornering at high speed.
- Pay particular attention to other personnel as well as fixed and moving objects within the working area and thereby avoid accidents.
- Always pull the truck behind you if the load blocks the view.
CAUTION! When operating on inclines, the truck must be operated with extreme care with the load facing downwards in the direction of the incline. Use trucks with a hand brake.
WARNING! Braking shall take place gently and carefully to prevent the load from slipping off of the forks and causing damage.
CAUTION! Adapt the speed according to the incline and surface.
-
Always keep a safe distance from the edges of loading docks and loading ramps. Be attentive to marked risk areas.
-
Before the truck is driven on to a loading ramp ensure that the ramp is correctly secured and has the necessary load bearing capacity. Drive slowly and carefully across the ramp.
-
When the truck is driven on to another vehicle, make sure the vehicle is stable and that the brakes have been applied correctly.
-
Before the truck is driven into a lift, the operator must make sure the lift is approved for the total weight of the truck, the load, operator, and any other passengers in the lift. When entering the lift, the load must enter first, not the driver. No other personnel
should be in the lift when the load or truck enters or leaves the lift. -
Any accidents that have caused personal injury or damage to buildings or equipment must be reported to the supervisor. Incidents and faults on the truck shall also be reported.
-
Handling loads
-
Only handle loads that are within the truck’s permitted lifting capacity. The length and width of the forks shall be adapted to the load’s shape and dimensions.
-
Only loads that are stable, evenly distributed on the forks and safely arranged should be handled. (See Figure 1) Figure 1
WARNING! Risk of overturning. Cornering: The load can fall from the truck if the speed is too high and cause damage. Cornering with a high load must be performed with extreme care.
WARNING! The truck may only be used to carry goods. It is prohibited to use the truck to transport persons, and as result it must not be used as a “scooter”.
WARNING! Risk of crushing under forks. The risk of crushing can occur when lowering or by a defect in the hydraulic system and accidental lowering. Be attentive to the risks of crushing and ensure that other persons are not in the immediate vicinity of the truck.
CAUTION! Risk of crushing. If the hands are placed on the outside of the handle, there is a risk of crushing in narrow spaces. There is also a risk of crushing if the hands are kept between the tow bar and the tow bar bracket, or between the top cap and the hydraulic unit. Because of this, be sure to keep the hands only on the top of the handle when operating the truck. (See Figure 2)
PARKING THE TRUCK
- When parking the truck, the forks must be fully lowered.
- Never park the truck on an incline.
- Never park the truck so that it obstructs traffic or work.
MAINTENANCE AND REPAIR
- To prevent malfunction and accidents, the truck should be maintained regularly according to the Lubrication diagram. Only qualified and trained personnel are permitted to maintain, adjust or repair the truck.
- Only approved original spare parts shall be used with service and repairs.
- Modifications or conversions to the truck that affect the safe use or function are not permitted.
- It is recommended that you sign a service and maintenance agreement with your closest representative to ensure the truck’s operating
economy and safety.
NOTE: Never neglect daily inspection and the safety checks. Serious injury can
occur if neglected. Any faults or damage that is
detected, should be reported immediately to the supervisor. Never use a faulty
truck.
DAILY SERVICE AND SAFETY CHECKS
SAFETY REGULATIONS WITH MAINTENANCE WORK
- Keep the area where you carry out the service clean. Oil or water makes the floor slippery.
NOTE: Extreme cleanliness should be observed at all times when working with the hydraulics. Dismantled parts should be clean and inspected carefully. Always replace gaskets after dismantling.
- Store and dispose of changed oil in accordance with local directives.
- Do not release solvents and the like, which are used for cleaning/washing, into drains that are not intended for this purpose. Follow the local directives that apply for disposal.
- Remove at least 100 mm (4″) of paint around the welding/grinding area through sand-blasting or the use of a paint stripper when welding or grinding on painted surfaces.
CAUTION! Harmful gases. Paint that is heated gives off harmful gases. Remove 100 mm (4″) of paint from the work area.
WARNING! Risk of crushing. A poorly supported truck may fall down. To prevent the truck from overturning, make sure it has been properly secured.
WARNING! Risk of crushing. There is a risk of crushing when working on the hydraulic system if the truck is loaded. Always unload the forks prior to work on the truck.
CLEANING AND WASHING
- Cleaning and washing of the truck is important to ensure the truck’s reliability.
- Always lubricate the truck after washing according to the lubrication diagram and table.
LUBRICATION DIAGRAM
OIL AND GREASE SPECIFICATIONS
INFORMATION SIGNS
- The weight of the load must be within the truck’s permitted lifting capacity, see the truck’s identification plate.
NOTE: If a plate is unreadable a new plate must be ordered.
LIFTING THE TRUCK
WARNING! Risk of cutting. There is a risk of cutting when the truck is lifted by hand and holding it by the forks and the end plate. Always use work gloves when lifting by hand.
WARNING! Risk of crushing. There is a risk of crushing when the truck is lifted by hand and holding it by the hydraulics body. Always use work gloves when lifting by hand.
TROUBLESHOOTING
NOTE: Do not attempt to repair the pallet truck unless you are trained and authorized to do so.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>