Boult Audio PROBASS GROOVE Neckband In Ear Wireless Earphone User Manual

Boult Audio PROBASS GROOVE Neckband In Ear Wireless Earphone

Pairing for the first time

Step 1: Make sure the product is fully charged.
Step 2: Press and hold the multi-function button for 5-6 seconds (approximately) to power-on the neckband. The neckband will indicate with red & blue flashing LED light.
Now, the neckband is in paring mode & ready to connect with your device.
Step 3: Turn-on the Bluetooth on your device & scan until you see Boult Audio Groove
Step 4: Click on Boult Audio Groove and pair your device with the neckband. Once paired, the neckband will indicate with blue flashing LED light.
Now, you can enjoy your music & calls.

Auto-pairing Mode (Re-pairing with your device)

Step 1: Turn-on the Bluetooth on your device.
Step 2: Press and hold the multi-function button for 3-4 seconds (approximately) to power-on the Neckband.
Step 3: The neckband will connect to your same device automatically. If not, connect to Boult Audio Groove in the Bluetooth settings on your device.

Product Introduction

Charging the neckband

• Use only SV/1 A USB charger to charge this product.
• This product or the Bluetooth functions cannot/should not be used during charging.
• This neckband will indicate with quick flashing red LED light when the neckbands battery need to be charged.
• Solid red LED light will indicate on the neckband while charging.
• Solid blue LED light will indicate on the neckband once charging is complete

Functions

• Voice assistance
  Click on the multi-function button for 2 seconds to activate the Google assistant/Siri.
  Google assistant/Siri will pop up on your phone screen.

• Play/Pause music
  Single click on the multi-function button to play/pause the music.

• Answer/End/Reject calls
  Single click on the multi-function button to answer/end a call.
  Press & hold the multi-function button for 2 seconds to reject the incoming call.

• Redialing the last call
  Double click on the multi-function button to redial the last phone number on your mobile phones dialing list.

• Change music track
  Press & hold the (-) volume button for one second to change the music track to the previous track.
  Press & hold the (+) volume button for one second to change the music track to the next track.

• Increase/Decrease volume
  Single click on the (-) volume button to decrease the volume.
  Single click on the (+) volume button to increase the volume.

• Switch ON/OFF
  Press and hold the multi-function button for 3-4 seconds (approximately) to power-on the neckband.
  Flashing blue LED light will indicate on the neckband when powered-on.

Press and hold the multi-function button for 3-4 seconds (approximately) to power-off the neckband. switched-off.
Red LED light will flash and the neckband will get

Safety Precautions

Please make sure to follow the instructions provided in this manual for your safety and to extend the life of the neckband.

• Please keep this device away from extreme heat, humidity or corrosive environment.
• Please don’t over-charge the neckband as it will decrease the service life of battery.
• Please use only a good quality phone charger (5V/1A) or USB charging port to charge the neckband.
• This product or the Bluetooth function should not be used during charging.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>