Aquascape 45041 Universal Remote for Adjustable Flow Pumps Installation Guide

: June 7, 2024
: Aquascape

Table of Contents

Instructions
Troubleshooting
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

INSTALLATION INSTRUCTIONS

UNIVERSAL REMOTE
FOR ADJUSTABLE FLOW PUMPS

Item #45041

Contents – #45041

Aquascape 45041 Universal Remote for Adjustable -
Overview

Instructions

INSTALLATION AND OPERATION

Using a Phillips Head Screwdriver, remove the four screws on the back of the universal remote (Ex. 1).
Remove the back cover from the remote and place the included battery in the battery compartment (Ex. 2).
Replace back cover and re-install the four screws to secure.
NOTE: In order to control the flow of your Aquascape Adjustable Flow Pump without the use of a smartphone or tablet, you will need to pair the universal remote to your pump receiver.
The Smart Control Receiver includes a switch that allows the pump to be operated in the two following modes (Ex. 3).
Position 1 Operated by Universal Remote or Aquascape Smart Control App
Position 2 Bypass control and operate at full flow-rate
Ensure that the receiver is set to Position 1 before beginning the pairing process (Ex. 3).
Plug the Smart Control Receiver into an outdoor rated GFCI.
NOTE: If the receiver is plugged in and working, unplug the unit and plug it back into the outlet.
Press and hold the “+” and “-” buttons simultaneously for more than 3 seconds (Ex. 4) to engage the pairing mode (indicated by flashing numbers on the display of the remote).
NOTE: Depending on whether you have a Smart Control Receiver (#45038) or Smart Control Receiver Large (#45039), you will need to select the proper number setting on the remote to continue pairing.
- Smart Control Receiver (#45038) Set remote to “2”
- Smart Control Receiver Large (#45039) Set remote to “1”
Use the “+” and “-” buttons on the remote to select the proper number setting for your receiver
After selecting the correct number on the remote, press the power button on the remote to complete pairing the remote to the receiver.
NOTE: Complete remote pairing process within 1 minute of connecting the receiver to the power source.
The universal remote allows for flow adjustment between settings 1 and 10 and well as the ability to turn the pump on/off (Ex. 5).
For more control, including dynamic scheduling, connect the Smart Control Receiver to the Aquascape Smart Control App and control the pump from your smartphone or tablet (See Smart Control Receiver instructions for more information).
NOTE: The Universal Remote has an approximate range of 150 feet/45 meters. The range may be reduced if there are obstacles between the remote and receiver. To control your pump from anywhere, use the Aquascape Smart Control App.
A mounting holster is included which provides a location to store the remote control. The holster includes an adhesive backing as well as two screws for quick and easy mounting (Ex. 6).
Mount or store the remote in an area that is protected from the elements.

Troubleshooting

Remote not controlling the receiver
Ensure the receiver switch is set to the correct position
Ensure remote battery is functioning
Re-pair the remote to the receiver

PROFESSIONAL GRADE / CLASSE PROFESSIONNELLE

facebook.com/AquascapeInc
youtube.com/aquascape4
twitter.com/AquascapeInc

For more information about our company or products, please visit our website at aquascapeinc.com or call us at US 866-877-6637 CAN 866-766-3426 Pour plus de renseignements sur notre entreprise ou nos produits, veuillez vous rendre sur notre site Web aquascapeinc.com ou nous appeler au 866-877-6637 (aux É.-U.) ou au 866-766-3426 (au Canada).
©2019 Aquascape, Inc. · All Worldwide Rights Reserved · Tous droits réservés mondialement 11/19