Aquascape 58014 Stacked Slate Urn Fountain Kit Instruction Manual
- June 1, 2024
- Aquascape
Table of Contents
Aquascape 58014 Stacked Slate Urn Fountain Kit
Specifications
-
Product: Stacked Slate Urn
-
Available Sizes: Small, Medium, Large
-
Assembly: Multiple sections, stack and lock by twisting in a
clockwise motion -
Recommended Water Pump:
- Mini – 320 GPH Water Pump (#91026)
- Extra Small and Small – Ultra 550 (#91006)
- Medium – Ultra 1100 (#91008)
- Large – Ultra 2000 (#91010)
-
Finish: Outdoor/exterior latex-based paint
-
Warranty: One year from date of purchase
Assembly
- Unpack all sections of the Stacked Slate Urn.
- Stack the sections on top of each other in the desired order.
- Lock the sections in place by twisting them in a clockwise motion until secure.
Maintenance
- Check the exterior paint for any touch-ups needed using the color reference tile provided.
- Regularly inspect the fountain for any debris or blockages that may affect water flow.
Winter Care
- While the fountain is designed to withstand freezing temperatures, consider covering it to protect the finish during winter.
Warranty Information
- The product is covered by a one-year warranty against manufacturing defects.
- Warranty does not cover damage due to negligence, misuse, or lack of maintenance.
FAQ (Frequently Asked Questions)
Q: Can I use corrosive chemicals in the fountain?
A: No, the fountain should only be operated in freshwater conditions without
corrosive chemicals like chlorine or bromine.
INSTA LL ATION INSTRUCTIONS
STACKED SLATE URN
The Aquascape Stacked Slate Urns are ideal for adding an impressive, natural-
looking stacked slate fountain in any location. This instruction manual will
guide you through the proper setup and recommended maintenance procedures for
the Small, Medium, and Large Stacked Slate Urns.
Contents – #58014, 78359, 98939, 78207, 98940
No. Description
- Silicone tubing with fountain fitting
- Stacked Slate Urn
Assembly
Small, Medium, and Large Stacked Slate Urns come in multiple sections. Assemble the fountain by stacking the sections and locking them in place by twisting in a clockwise motion.
- Feed the included silicone water tubing down through the urn and into the reservoir.
- Set the fountain on an appropriate basin or reservoir (Ex. 1).
- Ensure the fountain is level for proper water flow. Aquascape Fountain Shims (#78159) can be purchased separately for quick and easy leveling.
- Top the basin with decorative gravel or river rock. The rock will help to keep the urn in place in windy conditions. If desired, gravel or small stones can be added to the inside of the urn to further stabilize.
- Connect the pipe to the water pump (not included) and set the pump in the basin or reservoir (Ex. 2).
- Fill the basin or reservoir with water (Ex. 3).
- Plug pump into GFCI-protected power source and enjoy (Ex. 4). RECOMMENDED WATER PUMP: Mini – 320 GPH Water Pump (#91026), Extra Small and Small – Ultra 550 (#91006), Medium – Ultra 1100 (#91008), Large – Ultra 2000 (#91010)
Maintenance and Winter Care
NOTE: This product is finished with an outdoor/exterior latex-based
paint. Depending on product age and exposure to the outdoor elements, the
paint may need to be touched-up over time. A color reference tile is included
with these instructions to help match an exterior latex-based paint for touch
ups (do not dispose of the tile).
WINTER CARE : While Aquascape fiber-resin fountains are designed to
withstand freezing temperatures, steps such as covering the fountain can be
taken to maximize the fountain life and finish.
Warranty Information
ONE YEAR WARRANTY
Aquascape warrants that the Stacked Slate Urn will be free of manufacturing
defects for one year from date of purchase. Proof of purchase required.
Warranty does not cover damage resulting from negligent handling, misuse, or
lack of reasonable maintenance or care. Fountains should only be operated in
freshwater conditions without corrosive chemicals like chlorine or bromine. If
upon Aquascape’s inspection, the product shows evidence of a manufacturing
defect, Aquascape’s liability is limited, at Aquascape’s option, to the repair
of the defect, replacement of the defective product, or refund of the original
purchase price. The warranty excludes costs of labor, removal of product,
shipping and expenses related to the installation and re-installation of the
product. All products that include plumbing (tubing, pumps, check valves) need
to be properly drained and winterized otherwise warranty is null and void. No
liability for loss or damage of any nature or kind, whether arising out of or
from the use of the product, whether defective or not defective, is assumed by
Aquascape, Inc. or its affiliates. Aquascape shall not be liable for any
incidental, consequential or other damages arising under any theory of law
whatsoever.
For more information about our company or products, please visit our website
at aquascapeinc.com or call us at US
866-877-6637 CAN
866-766-3426
©2023 Aquascape, Inc. • All Worldwide Rights Reserved
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>