Aquascape 95110 Biological and Mechanical Submersible Pond Filter Instruction Manual
- May 15, 2024
- Aquascape
Table of Contents
Aquascape 95110 Biological and Mechanical Submersible Pond Filter
Product Specifications
- Product Name: Submersible Pond Filter
- Model Number: 95110
- Contents:
1. Pump Cage
2. Submersible Pond Filter Foam (#95112)
3. Submersible Pond Filter Biological Filter Media (#95111)
4. Multi-Hose Adapters (3)Product Usage Instructions
Installation
- Place the pump cage at the bottom of the pond.
- Insert the Submersible Pond Filter Foam and Biological Filter Media into the designated compartments.
- Connect the Multi-Hose Adapters to the appropriate hoses (5/8MPT or 3/4 MPT).
- Submerge the filter into the pond, ensuring it is securely in place.
General Maintenance
- Regular maintenance is essential to keep your pond filter working efficiently. Follow these steps:
- Check and clean the pump cage regularly to prevent clogging.
- Rinse the filter foam and biological filter media with pond water to remove debris.
- Inspect hoses and connections for any leaks or damage.
- Monitor the water flow and adjust as needed for optimal filtration.
Contents
| No. | Description |
|---|---|
| 1. | Pump Cage |
| 2. | Submersible Pond Filter Foam (#95112) |
| 3. | Submersible Pond Filter Biological Filter Media (#95111) |
| 4. | Multi-Hose Adapters (3) |
Installation
- Thread the multi-hose adapter into the intake of the Submersible Pond Filter. Do not use tools to attach the fittings; fittings need to be hand-tightened only (Ex. 1).
- Remove the filter media from all packaging, and rinse thoroughly to remove dust created during transport.
- Once rinsed, place filter media into the filter (Ex. 2) and secure the lid.
- Water pump
- This filter is compatible with pumps up to 1,250 GPH/ 4 731 L. The Aquascape Ultra 1100 Water Pump (#91008) is recommended for ideal water flow and filtration.
- Connect a section of tubing (not included) from the filter to the intake of a compatible pump (not included) (Ex. 3).
NOTE: (2) multi hose adapters are included for attachment to the pump intake: 3/4″ MPT and 5/8″ MPT (Ex. 4). - Discharge from the pump can be used to feed a waterfall, or fountain, or simply for circulation.
- Place the pump and submersible filter into the pond (Ex. 5).
- Plug the pump into an external GFI-rated electrical outlet and enjoy (Ex. 6).
General Maintenance
- Inspect your filter regularly to make sure it is functioning properly. If water flow is reduced, it may be due to excess debris captured in the filter media.
- It is recommended to clean the filter as needed. Start by removing large debris from the outside of the filter, then unlatch the blue clips and lift the top to expose the media. Rinse the sponge and ceramic media in clean pond water and remove any remaining debris from the filter cage.
- Once clean, replace the filter media and reconnect the filter.
FAQ
- Q: How often should I clean the filter media?
- A: It is recommended to clean the filter media every 2-4 weeks, depending on the level of debris in your pond.
- Q: Can I use this filter in saltwater ponds?
- A: This Submersible Pond Filter is designed for freshwater ponds. Avoid using it in saltwater environments to prevent damage.
FOLLOW US
- facebook.com/aquascapeinc
- youtube.com/aquascape4
- pinterest.com/aquascapeinc
- instagram.com/aquascape_inc
For more information about our company or products, please visit our website
at aquascapeinc.com or call us at US
866-877-6637 CAN
866-766-3426
©2022 Aquascape, Inc. • All Worldwide Rights Reserved
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>