Runcam Racer 5 User Manual
- June 7, 2024
- RunCam
Table of Contents
Runcam Racer 5
USER MANUAL
Joystick Control
UART Control
-
Flight controller wiring
Note: Take UART3 for example -
Betaflight 3.3 or above setting**
Identifier| Configuration/MS| Serial Fix| Telemetry Output| Sensor Input| Peripherals
---|---|---|---|---|---
USB VCP| 115200| | Disabled AUTO| Disabled AUTO| Disabled AUTO :
UART1| 115200| | Disabled AUTO | Disabled AUTO| Disabled AUTO
UART2| 115200| | Disabled AUTO | Disabled AUTO | Disabled AUTO
UART3| 115200| | Disabled AUTO| Disabled AUTO | RunCam Device** AUTO
UART4| 115200| | Disabled AUTO| Disabled AUTO| Disabled AUTO
UART5| 115200| | Disabled AUTO | Disabled AUTO| Disabled AUTO -
UART Control
- When connected, The buzzer on Flight Controller will beep for 3 times; When disconnected, The buzzer on Flight Controller will beep for 2 times only; If connected successfully, you can long-press the up button to enter the OSD menu, right button to switch preset scenes, left button to calibrate voltage and down button to reset OSD.
Dimensions & Installation
OSD Menu
- QUICK SETTINGS
Quick settings:
-
Long press UP button for three seconds to access the OSD setting‘s screen
-
Long press the LEFT button for three seconds to calibrate the Gyro, The Racer5 camera PCB must be kept horizontal.
-
Long press DOWN button for six seconds to reset OSD settings to default
-
Long press the RIGHT button for three seconds to switch between the camera presets
-
CLR: clear the ID character;
-
ALARM: low voltage warning value, smartly judge the warning value of the battery when it’s low; if set it manually, then it saves the manual preset value;
-
Press the middle button to switch ON / OFF, then move to POS to enter the position adjustment.
-
Sharp View: Turn on, it will increase the image details, but also noise.
-
WIDESCREEN: Dynamic stretching to the aspect ratio of 16:9 to match with a screen in 16:9, the image center won’t change but the edge will be widened.
Camera Menu
- · SETUP MENU
- LANGUAGE ( ENGLISH / DEUTSCH / FRANCAIS / PYCCKNN / PORTUGUES / ESPANOL / 中文 )
- FLIP ( OFF / H-FLIP / V-FLIP / HV-FLIP )
- BRIGHTNESS ( 128/ 0-255 )
- CONTRAST ( 138 / 0-255 )
- SHARPNESS ( 128 / 0-255 )
- HUE ( 90 / 0-180 )
- COLOR GAIN ( 138 / 0-255 )
Parameters
| Model | RunCam Racer 5 |
|---|---|
| Image Sensor | Super WDR CMOS Sensor |
| Horizontal Resolution | 1000TVL |
| Lens | 1.8mm FOV160° |
| Screen Format | 4:3 /Widescreen Switchable |
| Signal System | NTSC / PAL Switchable |
| Mirror/Flip | Available |
| Integrated OSD | Yes |
| Built-in gyro | Yes |
| One-Touch Scene Setting | Personal / Lightrax |
| S/N Ratio | >50dB |
| Electronic Shutter Speed | Auto |
| Min. Illumination | 0.01Lux@1.2F |
| WDR | Super WDR |
| Day/Night | Color |
| Menu Control | Cable Control / Remote Control |
| Power | DC 5-36V |
| Current | 1 10mA@5V /40mA@l2V |
| Housing Material | ABS |
| Net Weight | 6.1g |
| Dimensions | L 1 9mmW19mm1-121mm |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>