ATEN VE811 HDMI HDBaseT Extender User Guide
- June 7, 2024
- Aten
Table of Contents
ATEN VE811 HDMI HDBaseT Extender
Hardware Review
VE811T Front and Rear View
VE811T Top View
VE811R Front and Rear View
VE811R Top View
Hardware Installation
VE811 Package Contents
- 1 VE811 HDMI HDBaseT Transmitter
- 1 VE811 HDMI HDBaseT Receiver
- 2 Power Adapters
- 1 User Instructions
VE811T Package Contents
- 1 VE811T HDMI HDBaseT Transmitter
- 1 Power Adapter
- 1 User Instructions
VE811R Package Contents
- 1 VE811R HDMI HDBaseT Receiver
- 1 Power Adapter
- 1 User Instructions
Hardware Review
VE811T Front and Rear View
- Power jack
- HDBaseT output port
- Link LED
- Power LED
- Long Reach Switch
- F/W upgrade port
- HDMI input port
VE811R Front and Rear View
- Power Jack
- HDBaseT input port
- HDMI out LED
- Link LED
- Power LED
- Long Reach Switch
- F/W upgrade port
- HDMI output port
Hardware Installation
- Connect the HDMI Input Port on the VE811T to the HDMI Output Port on your video source device using HDMI cable.
- Connect one end of the RJ-45 cable to the HDBaseT output port on the transmitter. Then connect the other end of the RJ-45 cable to the HDBaseT input port on the receiver.
- Connect the HDMI Output Port on the VE811R to the HDMI Input Port on your video display device using HDMI Cable.
- Plug the power adapter cable into the power jack on the VE811.
Working in Long Reach Mode
The VE811 supports long reach mode. When this mode is applied, the maximum
range can be enhanced to 150 meters at resolutions up to 1080p.
Troubleshooting
The Firmware upgrade port is reserved for tech support. If you would like to do firmware upgrade yourself, please contact your dealer.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>