ATEN VE801 HDMI HDBaseT-Lite Extender User Guide
- June 7, 2024
- Aten
Table of Contents
ATEN VE801 HDMI HDBaseT-Lite Extender
Package Contents
VE801
1 VE801T/R HDMI HDBaseT-Lite
Extender
2 Power Adapters
1 User Instructions
VE801T
1 VE801T HDMI HDBaseT-Lite
Transmitter
1 Power Adapter
1 User Instructions
VE801R
1 VE801R HDMI HDBaseT-Lite
Receiver
1 Power Adapter
1 User Instructions
Hardware Review
Hardware Review A
VE801T Front and Rear View
- F/W Upgrade Port
- HDMI Input Port
- Power Jack
- HDBaseT Output Port
VE801T Top View
- Link LED
- Power LED
VE801R Front and Rear View
- Power Jack
- HDBaseT Input Port
- F/W Upgrade Port
- HDMI Output Port
VE801R Top View
- HDMI Out LED
- Link LED
- Power LED
Hardware Installation
Hardware Installation B
- Connect the HDMI Input Port on the VE801T to the HDMI Output Port on your video source device using HDMI cable.
- Connect one end of the RJ-45 cable to the HDBaseT output port on the transmitter. Then connect the other end of the RJ-45 cable to the HDBaseT input port on the receiver.
- Connect the HDMI Output Port on the VE801R to the HDMI Input Port on your video display device using HDMI Cable.
- Plug the power adapter cable into the power jack on the VE801.
Important Notice
Considering environmental protection, ATEN does not provide a fully printed
user manual for this product. If the information contained in the Quick Start
Guide is not enough for you to confi gure and operate your product, please
visit our website www.aten.com, and download the full user manual.
Online Registration
http://eservice.aten.com
Technical Phone Support International :
886-2-86926959
North America:
1-888-999-ATEN Ext: 4988
United Kingdom:
44-8-4481-58923
EMC Information
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT: This equipment has
been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
this equipment.
CE Warning: This is a class A product. In a domestic environment this
product may cause radio interference in which case the user may be required to
take adequate measures.
Suggestion: Shielded twisted pair (STP) cables must be used with the unit
to ensure compliance with FCC & CE standards.
All information, documentation, firmware, software utilities, and specifications contained in this package are subject to change without prior notifi cation by the manufacturer. Please visit our website http://www.aten.com/download/?cid=dds for the most up-to-date versions.
Copyright 2014 ATEN® International Co., Ltd.
ATEN and the ATEN logo are trademarks of ATEN International Co., Ltd. All
rights reserved. All other trademarks are the property of their respective
owners. This product is RoHS compliant.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>