Cleverio 50006 Remote Bulb Starter Pack User Manual
- June 7, 2024
- Cleverio
Table of Contents
manual
Remote bulb starter pack 3 bulbs
Item: 50006
Specifications
| Lamp socket: | E27 |
|---|---|
| Lamp type: | LED |
| Brightness: | 600 Im |
| Lamp voltage: | 220 – 240 V, 50/60 Hz |
| Lamp power: | 7 W |
| Standby power: | < 0.5 W |
| Colour temperature: | 2700 K |
| Battery in remote: | lx CR2032 (included) |
| Frequency: | 433 MHz |
| Range: | Up to 25 metres |
| Effective Radiated Power: | ldBm |
Start
Connect one of the lamps to a lamp socket.
Turn the power to the lamp on and off twice and finally on the third time and
the lamp will start blinking. This process needs to be done within 5 seconds.
It is now in pairing mode.
Choose a channel with the remote. Use the left button at A, B, C or D.
Repeat the process if you want to pair together more lamps.
You can now turn on or off the item connected to the receiver by pressing the
chosen channel. Use the left button to turn on and the right button to turn
off. Wait until the red LED indicator turns off before sending a new
command with the remote.
You can connect several receivers to the same channel. They will all react
when pressing the remote.
If you want to forget/unpair a lamp, repeat the pairing process but press the
corresponding off button for the paired lamp to unpair it from the remote.
Safety information
Only suitable for working temperature between 0 °C to 35 °C. Not for outdoor use. Only for use in dry areas. Don’t open or modify the devices in any way, this should only be carried out by a qualified technician due to the risk of electric shocks or short circuits The remote has an approximate range of 25 m, this range can vary greatly due to concrete walls, electrical or electromagnetic sources that can interfere with the signal
Note!
If you encounter any problems with the manual, please go to
www.kjell.com/50006 for an updated version.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>