kogan KABTAADAPTA Bluetooth Audio Adapter User Guide

kogan KABTAADAPTA Bluetooth Audio Adapter User Guide

SAFETY & WARNINGS

• This equipment complies with the limits for a Class B digital device in accordance with FCC regulation. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

• This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions it may cause interference to radio or television reception.

• If this equipment does cause interference to your radio or television reception, the following measures can be taken to rectify the problem:
  o Reorient or relocate the adapter.
  o Increase the distance between your equipment and adapter.
  o Connect the equipment into a different power outlet to which the adapter is connected to.

• Do not dismantle or modify this equipment in anyway.

COMPONENTS

OVERVIEW

OPERATION

Getting Started

Step 1: Connecting to audio device

• Connect the Bluetooth adapter to your audio system or headphones using either the supplied 3.5mm to RCA cable or a 3.5mm audio cable.
• Press and hold the power button to turn on the Bluetooth adapter.

Step 2: Pairing with Bluetooth device

• Press and hold the multi-function button (MFB) to enter pairing mode. The blue and red indicators will flash.
• Activate Bluetooth on your phone or another device and click “KABTAADAPTA” to connect.

Note: Up to two devices can be simultaneous paired with the Bluetooth adapter. Connect the second device by following the same pairing process. Only one device can play audio at a time.

Step 3: Play

Bass Booster

• Pressing the “Mode” button will activate the adapter’s bass booster function.
• The indicator will turn green and the adapter will amplify your music’s lower frequencies.
• The volume levels may need to be adjusted to achieve the optimum result.

Charging the Adapter

• Plug the supplied charging cable into the charging port on the Bluetooth adapter.
• Plug the cable into a power adapter (mobile phone charger).
• The adapter is fully charged when the indicator turns off.

Reset

If the receiver cannot be connected or operate properly, please refers to the following method to reset the device:

• Press and hold the multi-function button for 10 seconds.
• The indicator flashes purple 3 times.
• Delete the adapter from your Bluetooth device’s connection list.
• Follow the pairing process to reconnect the adapter to your device.

SPECIFICATIONS

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com.

References

• Kogan Help Centre

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>