1Mii B06 Plus Bluetooth Audio Adapter with 3D Surround User Manual

1Mii B06 Plus Bluetooth Audio Adapter with 3D Surround User Manual

Model: 806

In the Box

A. Bluetooth adapter
B. 5V power cable
C. 3.5mm to RCA cable
D. User manual

Installation Diagram:

Application scenario:

It can tum all wired speaker into a Bluetooth one. Enjoy wireless music, free of harassing from any wires or cords.

Instructions for operation:

Pair and connect two devices simultaneously:

1. Pair with the first device by following the previous instructions in the “Installation diagram” section.
2. Pair with the second device.
   • Long press 11J,II / I button to enter the pairing mode again. the LED will flash Blue and Red.
   • Activate bluetooth on the second device and click “BOS+” to pair.
   Note: You can only play music on one device at a time. you need to pause the music on your device first to play music on the other one.

Warranty:

Warranty service is limited to normal use. Any man-made damages such as tom connecting ID an unsuitable power source, using an unsuitable device, or not following the instructions, as well as damages that did not occur during shipping, repairs and adjustments not approved by the company, damages tern misuse, inattention, or improper installation may cause the warranty to be ineffective immediately. This warranty does not Include shipping fees.

Wet Location Marking:

Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

Product Parameters:

• Model Number: B06+
• Product Name: Hi-Fi Bluetooth Receiver (Bluetooth Adapter)
• Bluetooth Version: 5.0
• Audio Codec: aptX, aptX-LL, SBC
• Operational range: indoors: up to 50-70ft (without obstacles) outdoors: up to 164ft (without obstacles)
• Input voltage/ current: DC5V=500mA
• Operating temperature: -10°C ~ 45°C
• Storage temperature: -20°C ~ 60°C
• Product size: 95x95x26mm
• Product weight: 106g

FCC Notice

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

https://1mii.com/download-21

Scan the code to get more language instructions.

Any questions? Contact:
[email protected]
(Response Titme: 4-24 h,excl. holidays)

MANUFACTURER

ShenZhen 1 Mii Technology Limited.

Address: 4th FI, Bldg B, Runfeng Industrial Park, No. 4197 Baoan Blvd., Gushu Community, Xixiang St., Baoan Dist., Shenzhen, China.

FCC ID: 2AJU3RT615

www.1mii.com

MADE IN CHINA

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>