CROWN CMGH-3101 Headphones User Manual
- June 3, 2024
- CROWN
Table of Contents
CROWN CMGH-3101 Headphones
Features
Virtual sound system 7.1 to stunning audio experience; Will make vibroshock when have bass sound; Ergonomic gaming design for comfortable long time use; Clear voice microphone system; Easy control function by volume, mute, mic off, light on,vib off; Long cable length 1.2m from headset to control and 2m to connector.
Specification
- Driver units size 50mm;
- Impedance:32±15%Ω;
- Frequency Response: 20Hz-20KHz;
- Mic sensitivity: -40±3Db;
- Headset interface USB2.0;
- LED mono backlight; Driver software for Mac and Windows(XP-10) OS use;
- Cable length: 3.2±0.15m.
Package
Gaming headset; Disc with software; User Manual; Warranty card.
Description
- Microphone(analog)
- Volume scroll (analog)
- Vibroshock
- Volume + (digital)
- Microphone(digital)
- Mute(digital)
- Volume – (digital)
- LED backlight
- USB cable connector
NOTE
Buttons with marks «analog» and«digital» have a separate functions.If you
change the volume by scrolling, button on RC will change volume in smaller
range.For maximum volume level need scrolled the volume on the earphone to the
maximum level and push the button on RC too.If you turn off MIC by earphone
button, button on the RC do not will turn on MIC.
Software installation and use
-
Installation instructions
Before installation, first, open the application, save and exit, so as not to cause data loss after installation.-
Turn on the computer, insert CD, enter the IntoInstallation page automatically or read the CD.
-
Enter the Installation screen, and click “Next”.
-
Select “I agree” and then click “Next”
-
Click “Install”.
-
Connect the headset to the PC.
If this diagram occurs, it indicates that the headset is not successfully connected to the computer. Please try another USB port, and click “OK” to Install. Click “Finish” and the system will restart.
NOTE: -
When installing the driver, please close all anti-virus software.
-
Please remember the USB port used to Install the driver, when re-plug the USB. please use the use port used for installation, and if use other use ports, it needs to re-install the driver.
-
If unplug the USB plug during media player playing, It may cause the system not work normally. It is suggested to end the media player application before disconnecting the USB plug.
-
-
Run the software by double-click on the icon.
-
Headset volume control.
- Double-click on the “speaker” icon setting bar.
- Volume control.
- Headset mute switch.
- Left and right volume balance control.
- Volume balance control lock.
-
Music sampling frequency (select the sampling frequency the same as the music sampling frequency to obtain better quality music).
-
Equalizer.
- Equalizer switch.
- Equalizer preset mode.
- 10 bands equalizer adjustment.
- Remove adding custom mode.
- Select custom mode.
-
Music environment sound eflects.
- Music environment Imitating sound effect switch.
- Sound effect environment mode selection.
-
Virtual sound 7.1effect control.
- Sound effect control switch.
- Clockwise surrounding; manually rotate surrounding; counter clockwise surrounding; manually translate surrounding; reset surrounding.
- Surrounding sound effect volume control.
-
Pitch settings
- Status switching mode.
- Pitch control switch.
- Pitch adjustment.
- Cause elimination switch control.
- Cause elimination adjustment.
-
XEAR surrounding sound effect.
- Surrounding sound effect switch control.
-
Microphone volume control.
- Microphone volume control.
- Microphone mute switch.
- Monitor mute switch.
- Monltor mute switch (Mute Is default In normal use).
-
Karaoke magic sound selection.
- Microphone echo switch.
- Magic sound effect switch.
- Imitating sound effect: imitating monster sound effect, imitating cartoon sound effect, imitating male sound effect, imitating female sound effect
-
Microphone volume strengthening settings.
Precautions
Please store and use the product at room temperature. Avoid exposure to rain, and moisture. Do not drop or fall. It might cause damage of the product. Please do not disassemble, repair and remodel the product on your own. Do not contact with fire. Special waste handling may be required.