Crown MNL-867RM Soft Close with Quick Release Toilet Seat User Manual
- June 1, 2024
- CROWN
Table of Contents
Crown MNL-867RM Soft Close with Quick Release Toilet Seat
FITTING INSTRUCTIONS
- Please read carefully before attempting to fit the seat & refer to the ‘does it fit’ diagram below to ensure it’s suitable for your toilet.
- Please make sure the warnings and after-care instructions are made available for the end user to read.
Does it fit?
TOP FIX INSTALLATION
- Push top fix inserts into toilet pan holes
- Place the template over the anchor pins, selecting the appropriate hole numbers (on the anchors) so that the 424mm dimension from the front of the pan to the centre line of the template is met.
Note : Selected anchor numbers must be matching - Once the 424mm dimension shown above is met and the template is parallel to the back edge, insert the bolts then tighten using a screwdriver.
- Remeasure the distance, making sure the 424mm dimension is met and remove the template and add the cover cap.
- Click seat in place.
WARNINGS
- The fittings pack contains small items which should be kept away from young children.
- The toilet seat can be dangerous if incorrectly installed. Assembly should be carried out by a competent person. No liability will be accepted for damage or injury caused by incorrect product installation or assembly.
- Do not stand on the lid or ring of your toilet seat.
- After a few days check that the fixings are still tight. This is necessary as the rubber components will compress during the first few days.
- Periodically check all fixings to ensure none have come loose and re-tighten where necessary. Please take care when handling or moving the toilet seat as careless handling may cause damage or injury.
- Never over-rotate the seat open when it is removed from the WC as this can cause damage to the hinges.
- Do not force down the seat ring or lid as this may compromise the performance of the soft close hinges.
AFTERCARE INSTRUCTIONS
Removing seat for cleaning
- Clean surfaces with a soft damp cloth and mild soap solution
- Do not scrub or scour
- Do not use abrasive cleaning agents. If using bleach, abrasive or corrosive cleaning agents inside the toilet bowl, ensure that these do not come into contact with the seat. Keep the seat in the upright position until all cleaner has been flushed away.
- Do not stand on the lid or ring of your toilet seat
For Technical Help Call: 01225 303 900
- Tavistock I Brassmill Lane Trading Estate I Bath I BA1 3JF
- E: [email protected]
- W : Tavistock-bathrooms.co.uk
Read User Manual Online (PDF format)
Loading......