Kruger Matz KM0784 Wireless Gaming Mouse Owner’s Manual

Kruger Matz KM0784 Wireless Gaming Mouse

SAFETY INSTRUCTIONS

Read this instruction manual and keep it for future reference. Producer does not take responsibility for damages caused by inappropriate handling and use of the product.

1. Protect this device from extreme temperatures, sources of heat and direct sunlight. Do not expose the device to water or humidity nor install near strong magnetic field. Do Dnot handle this device with wet hands.
2. Disconnect from power outlet if the device is not going to be used for a long time.
3. Do not use this device if it has been damaged.
4. Place the device on flat, stable surface.
5. Prevent the device from falling on the ground or being strongly impacted.
6. Producer does not claim liability for any damage caused by inappropriate use and handling or any mechanical damage.
7. Producer does not guarantee compatibility with every external device.
8. This product is not a toy; keep it beyond children’s reach.
9. Do not disassemble nor repair this device yourself. The device has no user serviceable parts inside. In case of damage, contact authorized service point for check-up or repair.
10. Always disconnect the product from the power source before cleaning. Clean the device with a soft, slightly damp cloth. Do not use any chemical agents to clean this device.
11. Do not point laser beam directly into eyes.

PRODUCT DESCRIPTION

1. Right button
2. DPI button
3. Lighting change button
4. Scroll wheel
5. USB cable
6. Left button
7. Forward button
8. Backward button

INSTALLATION

1. The USB plug of the mouse should be connected to a free, compatible USB port of the computer.
2. The operating system will automatically detect the mouse and install the appropriate drivers.
3. On the bottom of the mouse, slide the power switch down. The mouse will work in wireless mode.
4. To use the mouse in wired mode with a USB cable, connect it to the USB-C input on the mouse and the USB input on the computer. The operating system will automatically detect the mouse and install the appropriate drivers. Move the switch on the bottom of the mouse all the way up.
5. The mouse is ready for use.
6. To turn off the mouse, move the switch on the bottom of the mouse to the middle position.\

CLEANING

Always disconnect the product from the power source before cleaning. Clean the device with a soft, slightly damp cloth. Do not use any chemical agents to clean this device.

TECHNICAL PARAMETERS

• Precision: 800/1600/2400/3200 dpi
• Sensor: laser
• Sensor model : Pixart 3325IC
• Acceleration: 20 G
• Polling rate: 1000 Hz
• Buttons: 6
• Scroll wheel: scroll + button
• DPI switch: 4 modes
• Stroke life: up to 20 million times
• Pad life: 80 km
• Lift-off distance: 7 mm +/- 0,3 mm
• Skid pads: plastic
• Material: ABS
• Power supply: battery 600 mAh
• Working time: up to 15 h

Communication

• Connection type: wireless, wired
• Frequency: 2,4 GHz
• Interface: USB 2.0
• Charging port: USB-C
• Supported OS: Windows 7 / Windows 8 / Windows 8.1 / Windows 10 /Mac Physical parameters
• Hand orientation: right hand
• Weight: 102 g
• Dimensions: 124 x 68 x 43 mm

LEARN MORE

• For more information on this device visit: www.krugermatz.com.
• Read owner’s manual carefully before using.
• Visit www.krugermatz.com website for more products and accessories.
• In case of any doubts or questions reach out to our Frequently Asked Questions section.

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

Made in China for LECHPOL ELECTRONICS Sp. z o.o. Sp.k., ul. Garwolińska 1, 08-400 Miętne.

www.krugermatz.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>