Westinghouse iGen200s Portable Power Station User Manual
- June 6, 2024
- Westinghouse
Table of Contents
- WHAT’S IN THE BOX
- SAFETY GUIDELINES – DEFINITIONS
- REGISTERING YOUR PRODUCT
- GENERAL SAFETY RULES DANGER
- SPECIFICATIONS
- PRODUCT FEATURES
- HOW TO POWER AC APPLIANCES WITH THIS PRODUCT
- HOW TO USE THE FLASHLIGHT
- ERROR CODES
- COLD WEATHER USAGE
- RECYCLE
- MAINTENANCE
- STATEMENT
- WARRANTY
- TERMS
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Westinghouse iGen200s Portable Power Station
Unlock Mode: In order to prevent the power station from accidentally turning on during transportation, the product is shipped in locked mode (display shows “LoC”). To unlock, hold down the AC and DC buttons for 5 seconds until “OPE” shows on display, then release. All functions will now work.
Lock Mode: Hold down AC and DC buttons for 5 seconds until “LoC” shows on display. All functions are locked.
WHAT’S IN THE BOX
Power Station| DC Car Charger| AC Charger| DC Adapter Cable|
Accessories Bag|
User Manual
---|---|---|---|---|---
CHARGE FIRST! Before reading through the manual, you can begin to charge up this device by connecting it to the power supply provided and plugging into a wall socket.
WARNING: Lithium-ion batteries and products that contain lithium-ion batteries can expose you to chemicals including cobalt lithium nickel oxide, and nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
DANGER: This manual contains important instructions for operating this product. For your safety and the safety of others, be sure to read this manual thoroughly before operating the battery/charger. Failure to properly follow all instructions and precautions can cause you and others to be seriously hurt or killed.
INTENDED USE: The Westinghouse iGen200s Portable Power Station is intended as a power supply for electronic devices with a maximum power consumption of 150W. Our product is not suitable to be used with equipment that relates to one`s own personal safety and relies heavily on electricity, such as medical devices, equipment for nuclear facilities, the manufacture of air and spacecraft, etc. We therefore assume no liability for accidents involving personal safety, fires, or machine failures caused by using our product with the aforementioned devices.
ATTENTION:
Not permitted on airplanes
To preserve the battery lifespan, please use and recharge at least once every 3 months
Please dispose of batteries and electronic goods in accordance with local regulations
Avoid dropping
Use original or certified charger and cables
Avoid extreme temperature
It’s not waterproof, do not expose to liquids
Do not disassemble
SAFETY GUIDELINES – DEFINITIONS
It is important to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information.
DANGER: Indicates an imminently hazardous situation which, if not avoided will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
NOTICE: Used without the safety alert symbol indicates potentially hazardous situation which, if not avoided, may result in property damage.
DISCLAIMERS: All information, illustrations and specifications in this
manual are based on the latest information available at the time of
publishing. The illustrations used in this manual are intended as
representative reference views only. Moreover, because of our continuous
product improvement policy, we may modify information, illustrations and/or
specifications to explain and/or exemplify a product, service or maintenance
improvement. We reserve the right to make any change at any time without
notice. Some images may vary depending upon which model is shown.
Our company cannot be held liable for damages caused by fire, earthquake, use
by a third party, other accidents, intentional misconduct on the part of the
customer, abuse or other abnormal conditions.
Do not repair any damage to the AC plug or power supply on your own.
The warranty covers all terms and conditions of the warranty.
Contents that are not specified in the warranty terms and conditions are
beyond our responsibility.
Our company assumes no liability for damages caused by incorrect use or non-
compliance with this instruction manual.
ALL RIGHTS RESERVED: No part of this publication may be reproduced or used in any form by any means graphic, electronic or mechanical, including photocopying, recording, taping or information storage and retrieval systems without the written permission of Westinghouse Outdoor Power Equipment.
REGISTERING YOUR PRODUCT
Registering your product Online at www.wpowereq.com/register. To register your power station you will need to locate the serial number on a decal on the bottom of the power station.
GENERAL SAFETY RULES DANGER
DANGER:
-
DO NOT disassemble, repair or modify the unit or the battery.
-
DO NOT place the unit close to or in a fire or expose it to heat. Keep out of direct sunlight.
-
DO NOT charge, use or store the unit in a bathroom or in an area exposed to rain or moisture.
-
Only use the output socket to power external devices. Never connect the output to mains power under any circumstances.
-
DO NOT touch the unit or the plug-in points if your hands are wet.
-
DO NOT connect any metallic objects to the AC input or output.
-
DO NOT rub your eyes if fluid from inside the unit gets on your hands.
-
DO NOT dispose the unit together with household waste.
-
DO NOT use any inappropriate or damaged power cords.
-
DO NOT operate the unit above the specified input voltage.
-
DO NOT use the unit if it is not functioning correctly.
-
DO NOT move the unit if it is recharging or in use.
WARNING: -
Use and store the unit only in a clean and dry environment. DO NOT use and store in dusty or wet environment.
-
Check the unit prior to every use. DO NOT use the unit if it is damaged or broken.
-
Do not use the unit if the power cord is damaged or broken.
-
Keep the unit away from children. DO NOT let children use the power supply unit.
-
Keep this product away from pets.
-
DO NOT use or store the unit in an area or environment with high temperature.
-
Should fluid from inside of the unit come in contact with your skin or clothing, wash the affected areas with tap water.
-
In a storm, unplug the power cord from the socket. · DO NOT charge the unit via power supply systems that operate outside of 100-240V.
-
DO NOT place the unit on its side or upside down while in use or storage.
CAUTION: -
If rust, peculiar odors, overheating or other abnormal circumstances are observed, stop using the unit immediately and contact our customer service team.
-
The unit complies with all legal requirements for transport of dangerous goods. · Make sure that the unit is properly secured when transporting it in a motor vehicle.
-
Only charge, use and store the unit within an ambient temperature of -10 to 40 °C (14° – 104 °F).
-
Switch the unit off immediately if it has accidentally fallen, was dropped or was exposed to vibrations.
-
Carefully read the instructions for the electric devices that you intend to connect to your portable power station.
-
Make sure that the device you are connecting is switched off before you connect it.
SPECIFICATIONS
Model Name: | iGen200s |
---|---|
Battery Cell Chemistry | Lithium Ion (Li-ion) NMC |
Capacity: | 194Wh |
Total mAh: | 21×2500(mAh)=52,500 |
Running Watts: | 150W |
Peak Watts: | 300W |
AC Output Voltage | 120V |
DC Output Voltage: | 9-12.6V |
Sine Wave Type: | Modified |
Frequency | 60Hz |
Life Cycle: | 500 Cycles to 80% Capacity |
Charge Time: | 6 Hours with AC charger |
Working Temperature: | -10°c to 40°C (14° – 104°F) |
Parallel Capable: | No |
Warranty: | 2 Years |
Certifications: | FCC, RoHS, BC, UN38.3 |
PRODUCT FEATURES
- Input for Charging from Solar Panels, or AC
- Cooling Fan 3. LED Display
- Handle
- Flashlight ON/OFF Button
- Flashlight
- Control Panel
- Lock/Unlock mode: Hold down AC and DC buttons for 5 seconds
CONTROL PANEL FEATURES
- 120V AC, up to 1.25A, 150W max
- AC Power ON/OFF
- USB-A, 5V DC, up to 2.4A, 12W Max
- USB-A QC (Quick Charge) 3.0, 5/9/12VDC, up to 3.0A, 18W Max
- USB-C, PD (Power Delivery), 5/9/12V DC, up to 3.0A, 18W Max
- 6mm, 9-12.6V DC, up to 10A, (Cigarette Lighter Adapter Included)
- DC Power ON/OFF
LED DISPLAY
- Battery Capacity
- Total Power Output in Watts
- DC Output Indicator
- USB Output Indicator
- AC Output Indicator
- Error Indicator
MODIFIED SINE WAVE
The output voltage waveform of the inverter is called “modified sine wave”, it is a step waveform similar to household alternating current , this type of waveform is applicable to most of the load, including linear or switching power supply, transformer, electric motor etc. In a modified sine wave, the voltage rises and falls abruptly, the phase angle also changes abruptly and it sits at 0 Volts for some time before changing its polarity.
Note: Modified sine wave inverters are not suitable for all electrical appliances. Unusable appliances include some air-conditioning fans with capacitance voltage-reducing circuits.
HOW TO POWER AC APPLIANCES WITH THIS PRODUCT
- Make sure the appliance you are plugging in is turned off.
- Connect the power cable plug of the electrical appliance to the AC outlet of the product.
- Press the “AC Power ON/OFF” button to turn on. The button will illuminate when it is on.
- Turn AC appliance on.
- The LED Display will display real-time wattage of the appliance.
- When finished, turn off device, remove power cable and press “AC Power ON/OFF” to turn outlets off. (If you leave the AC Power button on it will drain the battery.)
NOTICE: If the total output exceeds 150W, the power station will
automatically shut off. Please ensure the power consumption is less than 150W,
then press the AC Power button.
WARNING: The AC outlets, AC voltage, and frequency are different
according to different countries; please carefully check whether the product
specifications are consistent with the appliance specifications before use,
otherwise, it can lead to dangerous situations.
NOTE: When the AC port is not in use, turn “AC Power ON/OFF” button off
to conserve power.
CAN’T SUPPORT DEVICES MORE THAN 150W
Hair Dryer| Induction Cooker| Heater
---|---|---
Rice Cooker| Electric Drill| Electric Kettle
Microwave Oven| Toaster| Blender
HOW TO POWER DC APPLIANCES WITH THIS PRODUCT
- Connect the power cable plug of the electrical appliance to USB outlets or 12V port.
- Press the “DC Power ON/OFF” button to turn on. The button will illuminate when it is on.
- The LED Display will display real-time wattage of the appliance.
- When finished, press “DC Power ON/OFF” to turn off DC power. (If there is no DC power output for 30s the DC power will turn off.)
NOTICE: If the total output exceeds the wattage output of the DC outlet, the power station will automatically shut off. Please ensure the power consumption is less than what the outlet is rated for before using the device.
QUICK CHARGE OUTPUT: This product supports Type-A QC3.0 and Type-C PD that output 5V/3A, 9V/2A, and 12V/1.5A, for smart devices. The actual output voltage and current depend on the smart devices, it can be obtained by consulting the smart device manufacturer.
12V 6MM OUTPUT: The device comes with a 12V cigarette lighter adapter for 6mm port. This can output 9-12.6V DC, up to 10A. If you plan on using the 6mm outlet without adapter please confirm whether your DC 12V appliance supports charging with a 6mm DC plug (The diameter of the DC port of the product is 6 mm).
HOW TO USE THE FLASHLIGHT
- Press Flashlight ON/OFF button once to turn light on
- Press button again to make light 50% brightness
- Press a third time to turn light off
SOS MODE: While the light is on, hold down flashlight button for 3 seconds to activate SOS mode. Single press to turn SOS mode off.
WARNING: Do not look directly into the light. May cause damage due to the strong light.
PROTECTION MODE: Short-circuit/Overload Protection: If the AC or DC output is short-circuited or overloaded (- Load(s) power output is greater than 150W), the unit will shut down power output to protect itself. Some devices, such as refrigerator, ice maker or a laser printer may require a surge power, the surge power could exceed 300W or even higher, this could cause overload protection with this unit. Please remove the devices and consult with the device manufacturers for more information.
ERROR CODES
Code | Corrective Action |
---|---|
E01/ E02 | (DC and Error flash at same time): DC Over-Current Protection. |
Remove DC electrical appliances and restart the unit.
E03| (DC and Error flash at same time): DC Short-Circuit Protection.
Remove electrical appliances and restart the unit.
E05| (AC and Error flash at same time): AC Inverter Unconnected, or AC
inverter is broken, contact customer support at 1
855-944-3571.
E06| (AC and Error flash at same time):
AC Over-Load Protection: please remove some electrical appliances to lower the
power to less than 150W, and restart AC output
AC Short-Circuit Protection: please settle the short circuit faulty problem,
and restart AC output
Inverter Board Over-Temperature Protection: Check air vents for blockage or
remove some AC appliances and restart AC output.
-AC Input Voltage Too Low: Charge the unit.
-AC Input Voltage Too High: if “Error” indicator continues to blink, contact customer support at 1 855-944-3571.
RECHARGING WITH AC CHARGER
Using the included AC Wall Charger cable, plug the unit into standard wall
outlet to charge the unit. You will know the unit is charging when the blue
LED battery indicators are blinking. The unit is fully charged when all
battery indicators stop blinking. After the unit is fully charged, please
remove the AC
RECHARGING WITH 12V CAR CHARGER
Using the included car charger, plug the unit into a 12V cigarette lighter
(carport) in your car. You will know the unit is charging when the blue LED
Battery Indicator lights up and blinks. The unit is fully charged when all
battery indicators stop blinking and remain solid. .
NOTICE: To avoid car battery power loss. Charging this unit through your
car cigarette lighter is only available when your car engine is started.
RECHARGING WITH SOLAR PANELS (OPTIONAL)
Make sure to use panel with 8mm output plug. Place solar panel where it
will get as much direct sunlight as possible. Plug the output of the solar
panel into the input on the back of the power station to start charging. You
will know the unit is charging when the blue LED Battery Indicator lights up
and blinks. The unit is fully charged when all battery indicators stop
blinking.
NOTICE: When solar recharging your power station, take note of the
voltages of the solar panels and do not exceed 22V. Individual solar panels,
or solar panels chained in series in excess of 22V cannot be used with the
power station and can cause serious damage to the unit. For help on chaining
solar panels, call our Customer Service Center at 1-855-9443571.
COLD WEATHER USAGE
Cold temperatures (below freezing) can affect the unit’s battery capacity due to chemical characteristics of the battery. If you’ll be living off-grid in sub-zero conditions, we recommend you keep your unit in an insulated cooler, and connected to a power source (solar panels). The natural heat generated by the unit contained in an insulated cooler will keep battery capacity at its highest.
RECYCLE
Always return your used electronic products, batteries, and packaging
materials to dedicated collection points. This way you help prevent
uncontrolled waste disposal and promote the recycling of materials.
Westinghouse Outdoor Power Equipment – 13
MAINTENANCE
Having your power station connected to a power source, like a solar panel or
wall plug, between adventures or while in storage keeps its battery healthy
and topped off. This prolongs battery life and will ensure your power station
is charged and ready to go all day, every day.
If you can’t keep your power station plugged into a power source during
storage, fully-charge your power station every 3 months and store it in a
cool, dry place. Failure to maintain your power station by following these
steps can result in battery damage which will void the product warranty.
STATEMENT
I. FCC Statement The operation meets the following two conditions:
(1) The equipment will not cause harmful interference
(2) The equipment must accept any interference received, including
interference that may result in accidental operation.
Note: The equipment has been tested and meets the restrictions of Category B digital equipment in Part 15 of FCC Rules.
These restrictions are designed to provide reasonable protection against harmful interference in housing installation.
This equipment will generate, use and radiate radio frequency energy. If it is not installed and used according to the instructions, it may cause harmful interference to radio communication.
However, there is no guarantee that interference will not occur in a particular installation.
If the device does cause harmful interference to radio or television reception (which can be determined by switching off and switching on devices), users are advised to attempt to correct the interference by one or more of the following measures:
Re-adjusting or placing the receiving antenna.
Increase the distance between the device and the receiver.
WARRANTY
RESPONSIBILITY OF THE PARTIES
WESTINGHOUSE OUTDOOR POWER EQUIPMENT LLC’S RESPONSIBILITY
Westinghouse Outdoor Power Equipment LLC (hereinafter “Westinghouse”) warrants
to the original purchaser that its Westinghouse line of portable solar
generators will be free from defects in material and workmanship. Subject to
normal use and maintenance from the date of purchase, Westinghouse agrees to
repair or replace at Westinghouse’s sole discretion, any defective product
free of charge at any authorized Westinghouse Service Dealer within the below
listed applications, time periods, limitations, and exclusions.
CONSUMER’S RESPONSIBILITY
To ensure trouble free warranty coverage it is important that you register
your Westinghouse portable solar generator. You may register on-line at
www.westinghouseoutdoorpower.com/register-your-product/, or by
automated phone at 1-855-944-3571.
Registering your product confirms your warranty coverage and provides a direct
link between you and Westinghouse if we find it necessary to contact you
regarding your portable solar generator. Transportation charges on a product
submitted for repair or replacement under this warranty are the sole
responsibility of the purchaser.
Your receipt for purchase including date of purchase, model purchased, and product serial number must be maintained and presented to a Westinghouse
Authorized Service Dealer for warranty service. You must demonstrate reasonable care and use and follow suggested maintenance guidelines as prescribed in the operator’s manual for your Westinghouse portable solar generator. Proof of purchase rests solely with you, the original purchaser.
PRODUCT WARRANTY PERIOD
The warranty period for your Westinghouse portable solar generator is 24
months. In each case, the warranty period is measured starting on the date of
purchase by the original consumer purchaser. The sales receipt from
the first consumer purchase, model, and serial number are required in order to
establish the start date for the warranty period.
REMEDY
Westinghouse will repair or replace (at Westinghouse’s sole option and
expense) any Westinghouse portable solar generator product that fails to
operate during the applicable warranty period due to defect in workmanship or
material. If a valid claim is made during the applicable period, Westinghouse,
at its option, will either (1) repair the product, or (2) exchange the product
with a product that is of equal value. A replacement product assumes the
remaining warranty of the original product or ninety (90) days from the date
of replacement, whichever is greater. The customer is fully responsible for
the return shipping costs.
The customer is fully responsible for any and all associated ship cost of replacement plastic parts. For questions regarding coverage, please contact support@wpowereq.com or 1-855-944-3571.
LIMITED TO ORIGINAL CONSUMER BUYER
The warranty on Westinghouse’s portable solar generators are limited to the
original consumer purchaser and are not transferable to any subsequent owner.
EXCLUSIONS
Westinghouse portable solar generator warranty does not apply to any of the
following:
- Cosmetic defects such as paint, decals, etc.
- Costs of normal maintenance and adjustments.
- Repairs or diagnostics performed by individuals other than a Westinghouse Authorized Service Dealer (unless approved by Westinghouse)
- Failures due to normal wear and tear, accident, misuse, abuse, negligence or improper use.
- Failures caused by any external cause or act of God, including but not limited to, collision, theft, vandalism, riot, war, fire, freezing, lightning, earth-quake, windstorm, hail, water, flood, tornado, or hurricane.
- Damage related to rodent and/or insect infestation.
- Products that are modified or altered in a manner not authorized in writing by Westinghouse.
- Any incidental, consequential or indirect damages caused by defects in materials or workmanship, or any delay in repair or replacement of the defective part(s).
- Failure due to misapplication. · Telephone, cellular phone, facsimile, Internet access, or other communication expenses.
- Expenses related to “customer instruction” or troubleshooting where no manufacturing defect is found.
- Overnight freight or special shipping costs for replacement part(s).
- Overtime, holiday or emergency labor.
NON-WARRANTABLE APPLICATIONS
Westinghouse portable solar generators are expressly not recommended nor
warranted for the following applications:
- Primary Power – power used in place of utility power where utility power service is present or where utility power service does not normally exist.
HOW TO RECEIVE SERVICE
Should you require assistance or have questions about warranty service,
please email our customer service and support team at
service@wpowereq.com or call
1-855-944-3571.
For the Westinghouse Authorized Service Dealer nearest to you, call Westinghouse’s customer service and support team at 1-855-944-3571 or you may locate a Westinghouse Authorized Service Dealer at www.WestinghousePortablePower.com.
TERMS
COMPLETE TERMS OF AGREEMENT
This warranty and returns policy constitutes the full and final agreement
of the parties. Any communication, promises, or decisions made before the
existence of this agreement are null unless specifically included in this
document. Likewise, this warranty supersedes all previous warranty policies.
DISCLAIMER OF IMPLIED WARRANTIES
This limited warranty is in lieu of all other expressed or implied
warranties, including any warranty of fitness for a particular purpose or use
and any implied warranty of merchantability otherwise applicable to
Westinghouse portable solar generators. Westinghouse and its affiliated
companies shall not be liable for any special, incidental or consequential
damages, including lost profits. There are no warranties extended other than
as provided herein.
This limited warranty may be modified only by Westinghouse Outdoor Power Equipment LLC. Any implied warranties allowed by law shall be limited in duration to the terms of the express warranty provided herein. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights. You also have other rights from state to state.
Westinghouse Outdoor Power Equipment LLC’s only liability shall be the repair or replacement as stated above. In no event shall Westinghouse Outdoor Power Equipment LLC be liable for any incidental or consequential damages, even if such damages are a direct result of Westinghouse Outdoor Power Equipment LLC’s negligence. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights from state to state.
GOVERNING LAW AND FORUM SELECTION
These Terms shall be construed and controlled by the laws of the State of
Ohio. The consumer consents to exclusive jurisdiction and venue in the federal
and state courts located or nearest to Franklin County, Ohio. The consumer
waives all defenses of lack of personal jurisdiction and Forum non
Convenience.
SEVERABILITY
If, but only to the extent that, any provision of this Warranty and Returns
Agreement is found to be illegal, unenforceable, or void, both Westinghouse
and the consumer shall be relieved of all obligations arising under such
provision, it being the intent and agreement of the Parties that this
Agreement shall be deemed amended by modifying such provision to the extent
necessary to make it legal and enforceable while preserving its original
intent. If such amendment is impossible, another provision that is legal and
enforceable and achieves the same objective shall be substituted.
,WESTINGHOUSE, and INNOVATION YOU CAN BE SURE OF are trademarks of
Westinghouse Electric Corporation. Used under license by Westinghouse Outdoor
Power Equipment. All Rights Reserved.
Westinghouse Outdoor Power Equipment, LLC 777 Manor Park Drive Columbus, OH
43228 1-855-944-3571
www.WestinghousePortablePower.com
References
- P65Warnings.ca.gov
- Westinghouse Outdoor Power Equipment | Westinghouse Outdoor Equipment
- Westinghouse Outdoor Power Equipment | Westinghouse Outdoor Equipment
- Warranty Registration | Westinghouse Outdoor Equipment
- P65Warnings.ca.gov
- Warranty Registration | Westinghouse Outdoor Equipment
- Westinghouse Outdoor Power Equipment | Westinghouse Outdoor Equipment
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>