V-TAC VT-907 2-in-1 Garden Light Installation Guide
- June 6, 2024
- V TAC
Table of Contents
VT-907 2-in-1 Garden Light
INSTALLATION INSTRUCTION
2IN1 GARDEN LIGHT
TECHNICAL DATA
MODEL
|
VT-907
---|---
WATTS
|
7W
LUMENS
|
420LM
LED TYPE
|
COB LED (SAMSUNG LED)
BEAM ANGLE
|
100°
CRI
|
80
PF
|
0.5
Input Voltage
|
AC 220~240， 50Hz
Output Voltage
|
DC 30-42V
LIFE SPAN
|
20,000 Hours
ON/OFF TIME:
|
15000
DIMENSION
|
714mm*∅200mm
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 3 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
WARNING!
- Please make sure to turn off the power before starting the installation.
- Installation must be performed by a qualified electrician.
- The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
- Proper grounding should be ensured throughout the installation.
- To comply with all safely standards, the product must be used only for the purpose described in this instruction and must be installed in accordance with the wiring rules and regulation in the location where it is installed.
- Check whether the product has been damaged during transport. Do not operate/install any product which appears damaged in any way. Return the complete product to the place of purchase for inspection, repair space between or replacement
- During and after use, the product may be hot. Do not touch the product before it has completely cooled down.
- Failure to follow these instructions can result in minor injuries, or equipment damage.
- Take care not to pull any electrical wires during unpacking as this may damage the connections.
This marking indicates that this product should not be disposed of with other household wastes.
Caution, risk of electric shock.
ACCESSORIES INCLUDED
LAMP POST
SPIKE
LAMP POST INSTALLATION DIAGRAM
LAMP POST INSTALLATION INSTRUCTIONS
- Switch off the power before starting the installation.
- Install the lamp according to the diagram.
- Place the light fixture on a concrete lawn.
- Connect the wires as per the wiring diagram.
- After checking, switch on the power and test the light.
SPIKE INSTALLATION DIAGRAM
SPIKE INSTALLATION INSTRUCTIONS
- Switch off the power before starting the installation.
- Install the lamp according to the diagram.
- Place the light fixture a grass lawn.
- Connect the wires as per the wiring diagram. 5. After checking, switch on the power and test the light.
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>