V-TAC 80133970 Energy Storage Power Supply Instruction Manual

V-TAC 80133970 Energy Storage Power Supply

Product Information

The V-TAC Energy Storage Power Supply (Model: VT-2002) is a portable power supply that can be charged through AC input, solar charge, or auxiliary charge output. It has a battery capacity of 2016Wh and a net weight of 25kg. The power supply has a telescoping handle for easy transportation and rollable wheels for added convenience. It has multiple output ports including AC output, USB output port, QC output, USB-C output, and wireless charging output. The power supply has a cycle life of over 2000 cycles and uses LiFePO4 battery technology.

Product Usage Instructions

1. Before using or storing the product, use the charger to charge the product. When charging, the indicator light is blue. The LED screen will display the current charging ratio and charging power. When the LED screen shows 100% power, it means full charge. The charging process is about 2 hours. The current power can be viewed through the LED screen.
2. The V-TAC Energy Storage Power Supply can be charged through AC input, solar charge, or auxiliary charge output. It supports solar photovoltaic panel MPPT function charging (12-60V).
3. During the charging and discharging process, connect the device with the charging and discharging device, then turn on the charging and discharging. Otherwise, there might be a spark.
4. After the discharge is terminated, the device fan will continue to work to reduce the device temperature to a reasonable temperature for about 30 minutes (the time may vary with the scene temperature). At the same time charge and discharge, current more than 15A or equipment temperature is too high, will trigger automatic power-off protection.
5. The V-TAC Energy Storage Power Supply has multiple output ports including AC output, USB output port, QC output, USB-C output, and wireless charging output. Use the appropriate output port to charge or power your devices.

TECHNICAL DATA

700W solar panel

AC Output| 230V, Pure Sine Wave 2000W, Peak 4000W
Telescoping handle| 1.2m
Auxiliary Charge Output| 13.5V 9A (Max 100W)
Dimension| 470x367x292mm
USB Output Port| 5v 2.4A
QC Output| 5V/9V/12V/18W
USB-C Output| 5V 3A/9V 3A/12V 3A

/15V 3A/ 20V3.25A PD65W

Wireless Charging Output| 15W

Cycle Life| Cycled > 2000 **LiFePO4 Battery**

INTRODUCTION

Thank you for selecting and buying V-TAC Product. V-TAC will serve you the best. Please read these instructions carefully & keep this user manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best

Multi-Language Manual QR CODE
Please scan the QR code to access the manual in multiple languages

IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B

WARNING

1. Please make sure to turn off the power before starting the installation.
2. Installation must be performed by a qualified electrician.
3. Please read all instructions before using this product.
4. In order to reduce the risk, close supervision is required when using this product near children.
5. The use of accessories recommended or sold by non professional product manufacturers may lead to the risk of electric shock.
6. When the product is not in use, please pull the power plug out of the product socket.
7. It is forbidden to dismantle the product, which may lead to unpredictable risks such as fire, explosion or electric shock.
8. Do not use damaged wires or plugs or damaged output cables to use the product, which may cause electric shock
9. Please charge the product in a well ventilated place. Do not restrict the ventilation of the product in any way.
10. Please put the product in a well ventilated and dry place to avoid the risk of electric shock due to water intrusion.
11. It is forbidden to expose the product to fire or temperature higher than 130°C, which may lead to fire, explosion and other safety accidents.
12. It is forbidden to use or place the product under high temperature (direct hot sunshine or hot car interior), otherwise the internal battery may overheat, catch fire or function failure, shorten the service life and other risks.
13. Please charge the product every three months to prevent the battery from running out.

PACKAGING LIST

PARTS & DESCRIPTION

1. LCD Screen
2. AC Switch
3. 5V/2.4A Quick Charge
4. Wireless charging Switch
5. 15W – Wireless charging
6. Rollable wheels
7. Power Switch (click on start, press 3 seconds to shut down)
8. DC Switch
9. USB Output Switch
10. QC3.0 Output
11. Auxiliary Charge Output
12. Cooling outlet
13. Wire control interface
14. DC charging It can be charged by solar energy
15. Safety Switch
16. AC fast charging
17. 230V output
18. Telescoping handle
19. Portable Handle
20. Cushion Foot Pad
21. PD65W-Output

PRECAUTIONS FOR USE

1. ⑦ Press the button, the screen lights up, about 60 seconds after the screen backlight automatically closed.
2. When ②④⑧⑨the button is pressed, the output port is turned on to power the device.
3. When the power output port is not used, press the 2,4,8,9 button to turn it off to save power.
4. Low temperature may affect the battery capacity of the product, the product can be charged in the temperature range of 0 ~ 40 °C, in the temperature range of-10 ~ 40°C for equipment use.
5. The first use of the product is recommended to be fully charged, to avoid the lack of power to your use of inconvenience. After the device is fully charged, the fan will continue to work for about 2 minutes after the charging power cord is unplugged, which is used for cooling the device (the specific time may vary with the scene temperature) , pay attention to prevent dust particles or foreign matter from being inhaled into the equipment, otherwise it will easily lead to internal equipment damage.
6. After the discharge is terminated, the device fan will continue to work to reduce the device temperature to a reasonable temperature for about 30 minutes (the time may vary with the scene temperature) . At the same time charge and discharge, current more than 15A or equipment temperature is too high, will trigger automatic power-off protection.
7. During the charging and discharging process, please connect the device with the charging and discharging device, then turn on the charging and discharging. Otherwise, there might be a spark.

CHARGING MODE

Before using or storing the product, please use the charger to charge the product. When charging, the indicator light is blue. The LED screen will display the current charging ratio and charging power. When the LED screen shows 100% power, it means full charge. The charging process is about 2 hours. The current power can be viewed through the LED screen.

(the charging time is determined by the intensity of sunlight). Support solar photovoltaic panel MPPT function charging (12-60V) The above data are from the laboratory. The test data may vary due to the use environment, use method and other factors, and the charging time will be different.

FAQS

1. Can the product be brought on the plane?
   No, because this product is a lithium battery product. According to the international air transport standard regulations, carrying lithium battery products can not exceed 100Wh.

2. If the power of the equipment is within the rated output power range of the product, it cannot be used?

3. a. The power consumption of the product is less than 20%; it needs to be supplemented.

4. b. When some equipments start, the products which are larger than the peak value of rated power cannot be used;

5. Why is there sound when using it?
   The product adopts air cooling system, and the built-in fan is better to help product heat dissipation. It is normal to have slight noise when using.

6. Is the charger heating normal when charging?
   Charging charger heating is a normal phenomenon, standard charger in line with national safety standards, you can rest assured to use!

TROUBLESHOOTING

The product cannot be charged

| 1. The charger and product are not in good contact with the mains power supply (the charging indicator is not on at this time)| Check whether the charger and product are in good contact with the main power
2. The contact is good, but the charging indicator is not on| If the charger is broken, please contact the customer service
3. If the charging indicator light is on, it still can’t be charged| If the product is broken, please contact the customer service

The product has no output

| 1. The connection line between the equipment and the product is not plugged

in properly

| Make the equipment well connected with the product
2. The output port switch is not turned on| Turn on the port output switch, and the indicator light will be on
3. Low power consumption| Charging the product
4. There is no output after eliminating according to 1.2.3 above| If the product is broken, contact the customer service for handling

With device output interrupt

| 1. The nominal power or instantaneous starting power of the equipment used is greater than the power of the product| Select higher power energy storage products
2. If the equipment used is short circuit, an alarm symbol will appear on the display

screen, an alarm sound will be send and the product will automatically turn off the output within 15 seconds

| It is not a product problem.

It is recommended to replace the equipment.

3. The output will still be turned off after removing according to the above 1.2 point| If the product is broken, contact the after- sales department for handling

PARTS & DESCRIPTION

ICONS AND DESCRIPTION

References

• TAC.EU

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>