DOLPHIN SP-2100RBT Portable Bluetooth Speaker on wheel with Sound Instruction Manual

Portable Bluetooth Speaker on wheel with Sound
Instruction Manual

Carefully read the following instructions to properly use this item and get the most out of it. If you are having trouble, please call us using the phone number located on the back cover of this manual.

OVERVIEW

1. Power Button Use this switch to turn the unit on.

2. LED Light Switch Use this switch to turn the LED lights on the unit on or off

3. Power Input Use the included power cable to connect this unit to a 110-240v wall outlet.

4. Volume Controls the volume of the music playing on the main channel.

5. X-BASS Uses X-BASS technology to enhance the bass of your music playing on the main channel.

6. Microphone Sound Controls (Channel 2) The following dials control the sound coming from the”MIC IN”Jack. This channel can be used simultaneously with the main channel and Channel 3.
   • M.Echo: Controls the Echo.
   • M.Bass: Controls the volume of the low-frequency sound.
   • M.Treble : Controls the volume of the high-frequency sound.
   • M.Vol: Controls the overall volume.

7. Guitar Volume Control (Channel 3) Controls the volume of the sound coming throught the”GUITAR IN”.This channel works simultaneously with the main channel and channel 2.

8. MIC Priority When on, this function lowers the volume of the music on the main channel by 50% when you sing or talk on the microphone.

9. Guitar In (Channel 3) Use a 1/4″ Cable to connect a guitar or other audio source to Channel 3.

10. Mic In (Channel 2) Use a 1/4″ Cable to connect a microphone or other audio source to Channel 2.

11. FM Antenna Extend this antenna to pick up clear signals of radio stations far away.

12. Main Channel Controls The main channel is able to play music from Bluetooth, FM Radio, Auxilliary, USB, SD, or card.
    • MODE: Switches between the input modes mentioned above.
    • WaveSync: Use the instructions on the following page to learn how you can pair two speakers wirelessly for double the power.
    • REPE: Repeats the track playing on USB, SD, or Card.
    • PLAY: Press this button to play or pause music playing from Bluetooth, USB, or SD. When in FM mode hold this button to scan for stations.
    • PREV/NEXT: Use these buttons to switch through songs playing on Bluetooth, USB, SD, orTF card or channels in FM Radio mode.
    • USB/SD/TF: Insert a USB, SD, or card into the proper port and the speaker will automatically find any MP3 tracks and play them.

13. Graphic Equalizer
    Use this equalizer to personalize the sound of your specific preference. The right side controls the low end (bass) frequencies and the left side controls the high end (treble) frequencies.

14. External Battery Input Use the instructions on the next page to connect an external battery for even longer playing times between charges.

15. Auxiliary/Line Input Play music from an auxiliary device with an RCA cable when the main channel is in AUX mode.

Bluetooth Connection BT

1. Press the mode button on the main channel control panel until you are in Bluetooth mode.
2. Turn on the Bluetooth setting on your phone and search for”SP-21ORBT”.
3. Once connected, the LCD display will confirm the connection and you can begin to play music from your Bluetooth device. If a PIN code is required, enter”000011

The wireless range for Bluetooth on this speaker is 33ft (-10m). Any distance further than this may cause stability issues with the music cutting in and out.

WAVESYNC TM
To connect two speakers using WaveSync, first make sure you have two matching speakers with the same model number. Then do the following:
Wirelessly pair two SP-21 ORBT’s together to double

1. Turn on both speakers and put them in the power with WaveSync’ Technology Bluetooth mode.
2. Pair one of the speakers with your Bluetooth device using the Bluetooth instructions on the top of this page.
3. Hold the WaveSyncTM button on both speakers simultaneously until you a beeping noise confirming the connection.
4. Now any music played through Bluetooth will play on both speakers. This function does not transfer music coming from AUX, USB, FM Radio, or any microphone/guitar inputs.

NOTE: WaveSync may not work with older or newer versions of the same model speaker. WaveSync is also not likely to work with another WaveSync enabled model even from the same brand. Consult your dealer before making any purchasing decisions.
USB/TF MP3 Function
You can play your MP3 files using a USB or SD card by following the below instructions:

1. Place your MP3 song files in the root folder of a USB or SD card.
2. Insert the card into the proper port and the speaker will automatically begin to play the songs.
3. You can skip through the songs with the minus and plus buttons.

FM RADIO
With the FM Radio function, you can listen to nearby radio stations using the following instructions:

1. Press the mode button once and you will be in radio mode.
2. Hold the play button once and the speaker will scan for nearby radio stations.
3. Once it is done, you can use the forward and back buttons to switch between the stations.

AUX Mode
Use the following instructions to play music on this speaker from an auxiliary device.

1. Find a 3.5mm AUX cable or RCA cable.
2. Connect one end of the cable to the AUX port of the speaker and the other end to your audio device.
3. Press the Mode button to enter AUX Mode.
4. Adjust the volume on both your audio device and the speaker itself.

ACCESSORIES
Included in the box of this speaker is a wired microphone, power cable, remote control, and this user manual. If any items are missing, please contact your dealer.
BATTERY AND CHARGING INSTRUCTIONS

• To charge the battery, use the power cable to connect the speaker to a wall outlet.
• Make sure to fully charge the battery before using it for the first time to increase the life of the battery in the long term.
• The unit takes approximately 6 hours to fully charge. It will automatically begin charging once the power cable is connected.
• To maximize battery lifespan, make sure to charge the battery at least once every 3 months.
• Use the power switch to turn off the unit when it is not in use.

EXPANDABLE BATTERY INSTRUCTIONS

With the External Battery Input, you can connect a secondary battery to increase the playtime in between charges. Follow the below instructions to properly connect an external battery.

1. Acquire a 12V battery. The capacity could be any size. For reference, the capacity of the battery already built into this is the speaker is 7000mAh (7Ah).
2. Acquire a red and black battery connector cable and locate the external battery input on the back of the speaker.
3. Insert the exposed end of the red wire into the red clamp of the external battery input, and the black wire into the black clamp.
4. Connect the red clamp on the other end of the wire to the positive terminal of the battery and the black clamp to the negative terminal.
5. Charge the speaker as you would normally until the battery indicator light turns green and both batteries will be fully charged and ready for use.

Warning: Exposed metal such as clamps or exposed wire can heat up in this process. Do not use this function around children or flammable objects.

HAPPY
If you are happy with your item, consider connecting with us on social media or leaving a positive rating online.
01.888.550.3938
  [email protected]
L 1.951.800.0078 (International)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RF exposure statement
This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a
a minimum distance of 20cm between the radiator and any part of your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>