V-TAC VT-60006 Backlit Surface Mounted Panel Instruction Manual

: October 30, 2023
: V TAC

Table of Contents

V-TAC VT-60006 Backlit Surface Mounted Panel
Product Information
Product Usage Instructions
TECHNICAL DATA
INTRODUCTION & WARRANTY
MOUNTING
WIRING DIAGRAM
SURFACE PANEL INSTALLATION DIAGRAM
Read User Manual Online (PDF format)
Download This Manual (PDF format)

V-TAC VT-60006 Backlit Surface Mounted Panel

Product Information

The LED Backlit Surface Mounted Panel is a lighting fixture that has a round or square shape. It is available in different models with varying SKU numbers. It has a wattage ranging from 6W to 24W and provides a high lumens output. The Color Rendering Index (CRI)is not specified. The product has a plastic body with an IP20 rating and is suitable for indoor use only. The product has a long life span of 20,000 hours with an on/off cycle of more than 15,000 times. The product dimensions vary according to the model. The product must be used with caution and must not be disposed of with other household wastes. Direct exposure to the LED light beam should be avoided, and the product must only be supplied by rated voltage or voltage within the range provided. It is forbidden to use the product with a damaged protective cover and must not be used in unfavorable conditions such as dust, water, moisture, vibrations, explosive air atmosphere, fumes, chemical fumes, etc.

Product Usage Instructions

Any maintenance work must be performed when the power supply is cut off and the product has cooled down.
Clean only with a soft and dry cloth. Do not use chemical detergents.
Do not cover the product and ensure free air access as it may heat up to a higher temperature.
Read the manual before mounting and have it installed by a qualified electrician.
Switch off the power before starting the installation.
Confirm the installation position of the bracket and drill a hole.
Plug in the expansion bolt and fix the bracket on the ceiling with screws.
Connect the wiring as per the wiring diagram.
Fix the panel onto the bracket and fix the light and bracket with screws.
Switch on the power and test the light.

If there are any queries or issues with the product, reach out to the manufacturer at SUPPORT@VTACEXPORTS.COM.

TECHNICAL DATA

MODEL

| ****

SKU

| ****

SHAPE

| ****

WATTS

| ****

LUMENS

| ****

CRI

| ****

BEAM ANGLE

| ****

IP RATING

| ****

BODY TYPE

| ****

TOTAL CURRENT

| ****

INPUT POWER

| ****

LIFE SPAN

| ****

ON/OFF CYCLE

| ****

DIMENSION (LxWxH)

---|---|---|---|---|---|---|---|---|---|---|---|---|---
VT-60012| 7873,7874

7875,97173

| ROUND| 12W| 1200LM| ****

80

| 120°| ****

IP20

| ****

PLASTIC

| ****

71mA

| AC:220-240 50/60Hz| 20000H| >15000| 167.4×30.7mm
97178| SQUARE
VT-60018| 7876,7877

7878,97174,97175

| ROUND| 18W| 1800LM| ****

80

| 120°| IP20| ****

PLASTIC

| ****

103mA

| AC:220-240 50/60Hz| 20000H| >15000| 215.6×30.8mm
97179,97180| SQUARE| 214x214x31mm
VT-60024| 7879,7880

7881

97176,97177

| ROUND| ****

24W

| ****

2400LM

| ****

80

| ****

120°

| ****

IP20

| ****

PLASTIC

| ****

160mA

| AC:220-240 50/60Hz| ****

20000H

| ****

15000

| 288.6×31.2mm
97181,97182| SQUARE| 287x287x30.7mm

INTRODUCTION & WARRANTY

Thank you for selecting and buying the V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any other queries, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at your best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours of Daily operation. Usage of the product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.

WARNING

Please make sure to turn off the power before starting the installation.
Installation must be performed by a certified person.
The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
For Indoor use only
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similarly qualified person in order to avoid a hazard.
Method of attachment of the cable or cord such that any replacement can only be made by the manufacturer, his service agent, or a similarly qualified person.

This marking indicates that this product should not be disposed of with other household wastes.

Caution, risk of electric shock.

ATTENTION!

Do not look directly at the LED light beam. The product can only be supplied by rated voltage or voltage within the range provided. It’s forbidden to use the product with a damaged protective cover. The product must not be used in unfavorable conditions, e.g. dust, water, moisture, vibrations, explosive air atmosphere, fumes, or chemical fumes, etc. In the area of strong electromagnetic interference, the functioning of the product may be disrupted.

USAGE GUIDELINES/MAINTENANCE

Any maintenance work must be performed when the power supply is cut off and the product has cooled down. Clean only with so and dry clothes. Do not use chemical detergents. Do not cover the product. Ensure free air access. The product may heat up to a higher temperature.

MOUNTING

Read the manual before mounting. Mounting should be performed by a qualified electrician. Exercise caution. The product has a protective contact /terminal. Failure to connect the protective lead may lead to electric shock. Mounting diagram: see pictures. Check for proper mechanical fastening and connection to electrical power prior to first use.