Realunisence Q-TR01 Toilet Safety Rail User Manual
- May 15, 2024
- Realunisence
Table of Contents
Toilet Safety Rail Q-TR01
USER MANUAL
Thank You
for Your Support!
COMPATIBILITY
Realunisence Toilet Safety Rail fit for American Standard Toilet (not include
smart bider toilet )
Before install please make sure that your toilet size meets the following
requirements.
- Distance between toillet holes and tank is more than 1.8”
- Distance between holes is 4.8″-7.1″
- Toilet holes Dia. is not less than 0.55” (If there are already expansion tubes in it, ignore this)
| MIN| MAX
---|---|---
A Distance Between Toilet Holes| 4.8″| 7.1″
B The Area of| 1.8″| N/A
Expansion Tube Dia.| 0.55″|
SPECIFICATIONS
About US
Realunisence is a professional manufacturer and exporter that concerned with design, development and production of bathroom industry. We are committed to providing first-class products.
PACKAGE LIST
| 1 | Handrail x2 |
|---|---|
| 2 | Stainless Steel Base Plate x1 |
| 3 | Handrail Base Cover x2 |
| 4 | M6 Spring Washer x8 |
| 5 | Self Tapping Screw x8 |
| 6 | 4mm Allen Wrench x1 |
| 7 | M6*14 Screw x8 |
| 8 | Hexagon Flange nut x8 |
| 9 | M6 Spacer x8 |
| 10 | Expansion Tube x2 |
INSTALLATION STEPS
-
Lift up the handrail base cover,put the hexagonal flange nuts into the holes of the handrail base.
-
Align the handrail base holes with the base holes,use the M6x14 screws to connect and lock them. (Tighten the screws in diagonal alternately way by an Allen wrench until the 4 screws are evenly tightened.)
Note: If the screws are not tightened, the handrails may become loose and fall off, causing the user to be fallen or injure. -
Fix the handrail base cover to the base with self-tapping screws.
-
Take the toilet lid out.
-
Insert the expansion tubes into the toilet holes.(as shown in the picture)
Note: If there are expansion tubes in the toilet, please ignore this step. -
Align the holes of the base to the expansion tube holes, place the fixing frames of the toilet lid upon the holes of the base,tighten the two parts with screws,and install the toilet lid after instal lation.
Note: Before tightening the screws, make sure that the distance of the fixing frames is in consistent with the toilet lid. (If the screws are not tightened, the handrail may become loose and fall off, causing the user to be fallen or injure)
HANGZHOU ERREN E-COMMERCE Co. Ltd.
Address: No. 251,MiaoHouWang Road Binjiang District, Hangzhou
Email: support@realunisence.com