Razor Jetts & Jetts DLX User Manual
- June 6, 2024
- Razor
Table of Contents
Razor Jetts & Jetts DLX User Manual
Adjusting the Jetts
Installing/Replacing the Spark Pads/Skid Pads.
WARNING. To avoid serious injury:
- Direct parental supervision is required.
- This product is sport/transport equipment.
- Parents and careers should ensure that children are properly instructed in the use of this product.
- Use outdoors in places that allow you to improve your skills, and NEVER in traffic, on roads or near motor vehicles, where serious accidents can happen. Watch your surroundings for pedestrians, and bike, skateboard, scooter and other riders. Use in areas free from hazards such as poles, hydrants, and parked cars.
- Wet weather impairs traction and visibility.
- Never use near streets, swimming pools, hills, or steps. Use on smooth, dry, paved surfaces; avoid excessive speeds associated with downhill use. Don’t use on loose debris (such as rocks, gravel or sand), or speed humps. Do not use in the dark.
- Always wear closed toe shoes.
- Avoid rolling faster than you can run.
- Like any other moving product, using this product can be a dangerous activity and may result in injury even when used with proper safety precautions.
- Do not touch the Spark Pads after using. They will be hot.
WARNING. Sparks Can Induce Fire. To reduce risk of serious injury or fire:
- Use only under close adult supervision.
- Parents and careers should make sure riders understand that sparks can start a fire.
- Never use your Jetts™ Heel Wheels to try to start a fire. Your heel wheels emit localized sparks when the Spark Pads on moving heel wheels come in contact with hardened outdoor surfaces like asphalt or concrete. Be responsible.
- Keep sparks away from flammable or combustible substances.
- For outdoor use only on solid, clean, dry hardened surfaces. Keep sparks away from substances that can catch fire, such as dry vegetation, paper, chemicals or gasoline. Sparks can induce fire.
- Do not use in any area prone to wildfires or posted by fire authorities as a Fire Hazard Zone.
- The skill required to use this product may be greater than that required to ride, for example, a kick scooter.
- Applying too much pressure to the Spark Pads may cause loss of control.
- Do not spark continuously only for short periods while using, as this may overheat components. Always allow to cool (at least 15 minutes recommended) before replacing worn Spark Pads.
- Do not use at night or in low visibility conditions.
- Keep sparks away from eyes, hair, exposed skin and clothing. Sparks can burn.
- Spark Pads get hot during use. Do not touch after use.
- Adults must assist children in replacing Spark Pads.
Age and Weight Limits
- Not for use by riders under age 8.
- Maximum rider weight 80 kg (176 lb.).
Protective Equipment
- Always wear protective gear – helmet, elbow, knee and wrist guards.
Failure to heed product warnings, or to exercise caution, increases risk of injury!
Where and How to Ride
- This product has no brake.
- Learn to fall (by rolling if possible) without the product.
- Learn with a friend or parent to help.
- This product was manufactured for performance and durability. Trick riding can, over time, stress or damage any product.
- Risk of injury increases as degree of trick difficulty and product stress increases.
- User assumes all risks associated with trick riding.
- You may see people in videos, or people you know, doing tricks. These people have been practicing for a long time and accept the risks of doing tricks. Do not assume you can try tricks without great risk.
- Check local laws regarding where and how you may use your product.
Maintenance
- Always inspect product before using and regularly maintain it. If any parts are loose or broken, do not use. Replace worn or damaged parts such as straps or worn wheels.
- Check that all connection components are firmly secured and not broken.
- Under normal circumstances and conditions, the wheels and bearings are maintenance free.
- Regularly check that the various screwed parts are tight.
- No modifications can be made that can impair safety.
- Wipe with a damp cloth to remove dirt and dust. Do not use industrial cleaners or solvents, as they may damage the surfaces. Do not use alcohol, alcohol-based or ammonia based cleaners, as they may damage or dissolve the plastic components or soften the decals.
- Use only authorized Razor replacement parts.
Failure to use common sense and heed the above warnings further increases risk of serious injury. Use at your own risk and with appropriate and serious attention to safe operation. Use caution.
HOW TO RIDE
Stage 1- Practice:
- Find a fence, friend or something supportive to hold on to and maintain your balance.
- Position your feet:
- One foot in front of the other (dominant foot in front position)
- Knees slightly bent
- Hands held out front
- Practice lifting your toes to feel the balance point of the wheels.
Stage 2- Give it a try:
- Starting with your back foot
- Step, set, then push off & roll (lift your toes)
Stage 3 – On your own:
- When confident, try it without support.
- Keep your center of gravity over your heels. Do not lean backwards. It helps to keep your arms forward.
STOPPING
- Transfer your weight to the balls of your feet and walk or jog out of your roll.
SPARKING:
- Use your front foot.
- Lift your toes higher so that the Spark Pads come in contact with the surface.
- DO NOT attempt sparking until you have practiced rolling and are completely comfortable with the above steps.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>