1Mii B06TX Bluetooth 5.0 Transmitter for TV to Wireless Headphone/Speaker User Guide
- June 6, 2024
- 1Mii
Table of Contents
Bring Music to Life
Hello
BO6TX User Guide
Product specifications
6TXisa wireless long-range audio transmitter incorporating the latest aptX low-latency” technology for CD-Aike quality sound with virtually no delay.Compatible with devices with optical, RCA, and AUX audio outputs. make your TV, PC, Radio, and other home audio devices to stream music to your b/uetooth headphones Or speakers
- Supports profiles: A2DP, AVRCP
- Audio codec: apt&, apt&-LL, aptX-HD,SBC
- Operational range: indoors up to 5070ft (without obstacles) outdoors up to 197ft (without obstacles)
- Input voltage/ current: DC5V == 500mA
- Operating temperature: 10C 45C
- Storage temperature: .20C – 60C
- Support sampling rate in optical mode «48KHz
- Product size: 1119527mm
- Product weight: 126g
Package contents
A. B06TX
• Power Adapter
C.5Vower Cable
D.3.5mm Audio Cable
E. 35mm to RCA Cable
F. LJser Manual
Product overview and control functions
| Button/F unction | Operation |
|---|---|
| Power ON/OFF | Press and hold 1 second to power NO/OF |
| Pairing | Short press to pair the first Bluetooth device |
| Pairing | Short press to pair the second Bluetooth device |
| volume up | Short press to volume up |
| volume dow | Short press to volume down |
| Restored factory default settings | Press and hold and 5seconds |
| Switch to HD | Double click to switch o HD mode |
| Status | led indicator |
| --- | --- |
| Pairing mode | LED flashes blue and red alternately |
| Connected 1 device | LED stays blue (HD mode stays green) |
| Corrected 2 device | LED stays blue + red (HD mode stays green+red) |
| Disconnected | LED flashes blue once every 3 seconds |
| Restored factory default settings | LED flashes white together 2 times |
Installation diagram
- Connect audio source (TV, DVD, etc.) t0 806TX AUX/Optical port with the audio cables provided (optical or AUX/RCA) Optical cable and coaxial cable must be purchased by yourself
- Connect BO6TX to a power source (TV, PC USB socket, or power adapter) with a USB cable
- Press the ( ) button to power on
- Pairing Pair B06TX with your Bluetooth-enabled headsets /speakers
• Set B06TX into pairing mode, The LED hash Blue / Red alternately fast First- time use B06TX will auto enter pairing mode (with clear me0Ory)
– Afterward: Short press () button to enter pairing mode
+ Set your headsets/speakers to pairing mode refer to its user manual
+ Wait until connected (For quick pairing, better keep them within f meter when pairing)
Pair and connect two devices simultaneously
- Pair with the first device by following the previous instructions in the Installation diagram” section
- Pair with the second device Set second headphones/speaker to pairing 0ode
• Short press the () button to set B06TX to pairing mode again, the LED will flash blue and Red Wait until connected
Notes:
For improved compatibility and sound quality, we suggest that you use
Bluetooth devices with CSR chipset
Restore factory default settings
You may need to reset B06TX if it is not working as expected When B06TX is reset to factory default settings, all the paired device information will be cleared Hold the and buttons together 5s, the white LED will quickly flash 2 times
Troubleshooting
1)lam having trouble pairing and connecting to my Bluetooth device. please check the following:
- Your wireless device supports the wireless profiles listed in the specifications.
- Make sure both 906TX and the wireless device are in pairing mode.
- After connecting and pairing with my wireless device, I cannot hear any music from my sound system
- Make sure your audio device is not mute
- Make sure to remove the protective head-on the optical cable.
- In Optical mode, B06TX support device with sampling rate under 48kH
Note: Need to make sure TV audio format is set to PCM(Fig 8-1) and TV sound out as “External speakers”(Fig 8-2)
Any questions? Contact
Support@1mii.com
Support@Ankbit.com
(response one24h.e«cl hold0ys,)
MANUFACTURER
Aires At fl, 8g6 unless lotus.trio/Poke Ne. 4197800008led
Gushu Community. 8liong St Boon Dist. Shenhen. China
FCC ID: 2AUFR -RT808
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>