1Mii Ankbit E3 True Wireless Earbuds User Guide

: June 6, 2024
: 1Mii

Table of Contents

1Mii Ankbit E3 True Wireless Earbuds
In The Box
Product Overview & Control Functions
SPECIFICATIONS
TURN ON / OFF
PAIRING
RESET
CONTROLS
CHARGING
TROUBLESHOOTING
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

1mii

1Mii Ankbit E3 True Wireless Earbuds

In The Box

In the box

2 × Wireless Earbuds
1 × Charging Case
2 × L,M,S Ear Tips
1 × Type-C Charge Cable
1× User Manual

Product Overview & Control Functions

Product overview

HOW TO WEAR
Choose the earcaps that fit your ears the best, insert the earbud and rest into your ear gently. Tilt the Earbud back to under the ear ridge until secure fit.

SPECIFICATIONS

Wireless Version: Qualcomm QCC3020
Chip: 50 mAh Li-polymer Battery
Earbud Battery: 4.5 g
One Earbud Weight: About 1 H
Charging Time for Earbud: 7-8H (50% volume)
Music Playing Time: 6-7 H
Talking Time: 150 H
Standby Time: 2600 mAh Li-polymer Battery
(Including Charging Case): About 3H
Charging Case Battery: 15-18 Times
Charging Time For Case: Up to 33 ft/10 m
Operation Range: Up to 33 ft/10 m
Total Weight: 120 g
Charging Case Size: 85×53×36 mm
Waterproof Level; IPX5

Note: The time mentioned above may vary due to user’s operation mode and device setting.

TURN ON / OFF

Turn on-off

A: When the earbuds are on the charging case, open the charging case cover, both earbuds will be automatically power on with a voice prompt “power on” and “pairing” with blue lights flashes.
B: When the earbuds are not on the charging case and on OFF state, press MFB button for 2 seconds on L&R earbuds, they will be power on with a voice prompt “power on” and “pairing” with blue lights flashes.
A: Put the L&R earbuds into the charging case and close the charging case cover, the earbuds will be power off.
B: Press the MFB on L&R earbuds for 5 seconds, they will power off with a voice prompt “power off”.

PAIRING

For the first pairing, please open the charging case, both earbuds will turn on. Then turn on the wireless of your device, search “Ankbit E3-L”and click it to connect with a voice prompt “pairing success-ful”and “connected”.
About 3 seconds later, For IOS phone, you will see below Pop-ups Please click the “Pair” to connect the right earbud with a voice prompt “pairing successful”.For Android phone, you will see below Pop-ups Please click the “Pair” to connect the right earbud with a voice prompt “pairing successful”.
Both earbuds will be connected successfully with your device. You can use both earbuds simultaneously or just one earbud as mono mode.
4.Re-connection: when you open the charging case, the earbuds will automatically reconnect to the previous device (the wireless function of the device is on). Or you can turn both earbuds back on manually, they will also reconnect to the previous device without further actions.

Note:

The earbuds will automatically power off if they don’t connect the device in 5 mins.
The earbuds will be disconnected if beyond wireless signal range.
They will automatically reconnect the device if the earbuds back in wireless working range in 3 mins.
If the right earbud didn’t pair successfully the first time, please delete the previous connection on your phone，put both earbuds back to charging case and close the cover .Then pair them again like previous steps.

RESET

Reset

Reset the earbuds if you can only hear one earbud or earbuds cannot connect to your device.

Put both earbuds back to charging case and close the charging case cover. Delete the “Ankbit E3-L” “Ankbit E3-R” from the device pairing record. Then take the earbuds out again.
Press and hold the MFB on both earbuds simultaneously for 15 seconds (5 seconds to turn earbuds off and other 10 seconds to reset). The blue and red light will flash alternately 3 times.
Turn on the wireless on your device and select“Ankbit E3-L” to connect.