OONO 50 Amp Forward & Reverse Relay Module User Manual

CZH-LABS.com
50 Amp Forward & Reverse Relay Module
Model: F-1021 series

Features:

• Reversing relay module. Powers any reversing motor equipment, can be used for any application that requires the ability to reverse motion.
• Support Momentary-action(Self-resetting) switch and Alternate-action (Self-holding) switch. For the Self-resetting switch, when the switch is pressed the motor operates, and when the switch is released the motor stops.
• High-quality aluminum enclosure, thickness 1.5mm/0.06″. Diameter M6 / 6mm threaded copper terminals for battery and load. Connect switch terminal block: pitch 5.0mm/0.197″, wire size 26~12 AWG / 2.5mm square, stripping length 7mm/0.28″, Metric M2.5 slotted screw.
• Power on indicating red LED. Forward and Reverse status indicating LED, forward status lighting red reverse lighting green.
• Operating voltage: 10~15VDC or 20~30VDC, Rated current: 50 Amp.

Specifications:

| 12V Version| 24V Version
---|---|---
Operating voltage| 10 – 15V DC| 20 – 30V DC
Switch short current| 150mA @12V| 75mA @24V
Switch disconnect voltage| = V+
Load rated current| 50A
Static current consumption| 0.5mA (for power on LED)

Action Status:

FWD Switch| REV Switch| M1 Voltage| M2 Voltage| Motor Status
---|---|---|---|---
Disconnect| Disconnect| V+| V+| Stop
Connect| Disconnect| V+| OV| Forward
Disconnect| Connect| OV| V+| Reverse
Connect| Connect| OV| OV| Stop

Wiring diagram:

For Momentary-action(Self-resetting) switch

For Alternate-action(Self-holding) switch:

Dimensions:

References

• Interface module, relay module, terminal block module, Fuse module, DIN Rail Mount module

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>