Kurdene S8 Wireless Electronic Earbuds User Manual
- June 6, 2024
- Kurdene
Table of Contents
Kurdene S8 Wireless Electronic Earbuds
Welcome to our wireless electronic products. For a better user experience,
please read the manual carefully before using the product. To avoid
unnecessary accidents,
please do not disassemble this product by yourself. Please use a standard
charger.
Product Overview
Wearing Diagram
Pick up the right size for your ear caps:
We offer three different sizes of ear caps: large, medium and small. Please
try different sizes of ear caps first for a better experience.
Earbuds Manual
Pairing Manual
- Take out the two earbuds from the charging case and peel off the insulating film.
- Put the earbuds into the charging case to charge (the earbuds are in a charging state}.
- Take out the two earbuds, they will turn on and pair automatically and will be prepared for pairing to the phone (the indicator will tum to Red and blue alternately).
- After successfully paired the indicator of the right earbud will go off and the indicator of left earbud will tum to Red and blue alternately.
- Turn on the Bluetooth function on your phone and search ISBI and connect it.
- After the earbuds are successfully paired, the indicators will flash blue once every 6 seconds.
Sin and other voice Assistant
IOS and part of the Android users can triple touch the left or right haptic button to tum on the voice assistant.
Turn on
Take out the earbuds from the charging case or touch the haptic button for 3 seconds until the indicator flash blue once.
Turn off
Put the earbuds into 1he charging case, they would turn off and star charging or disconnect the Bluetooth, it will turn off in about 5 minutes.
Charge
Ear Buds charge
- Put both earbuds in the charging case, when the indica1or turns to Red then it’s charging.
- While in charging status, the Red signal light will stay solid.
- The Red signal light would tum off when the earbuds are fully charged.
Charging case charge
Please use the charger with an output of DC5V/0.5A. You can use the USB cable to charge the charging case with devices that have USB ports. (Please use factory-certified charger)_
Control Button
- Tum on Take earbuds ou1 to 1urn on
- Turn off Put back into charging case to turn off
- Previous Touch left haplic button twice
- Next Touch the right haptic button twice
- Volume + Hold right haptic button
- Volume – Hold left haptic button
- Play/Pause Touch left or right haptic button once
- Pick up phone Touch left or right haptic button once
- Hang up phone Touch left or right haptic button for 2 seconds
- Reject in calling Touch left or right haptic button for 2 seconds
Parameter specification
- Version V5.0+EDR
- Support A2DP,AVRCP,HFP,HSP
- Transmission distance 10m
- Frequency range 2.402GHz~2.480GHz
- Hi-fi equipmen1
6mm*2 - Impedance 16
- Standby time 70 hours
- Talk time 5 hours
- Listening time 50 mAh
- Earbud battery capacity 50 mAh
- Charging time 1.5 hour
- Charging case battery capacity 400mAh
- Charging case charging time About 1.5 hours
- Weight(single earbud) 4.7 g
Waterproof
Waterproof for daily life (you cannot submerge it into water), you can wear it
while showering, swimming, washing face, during exposure to rain, or even
while having a bath, but not while you dive.
Please note this when you swimming(as an illustration):
Attentions
- Please do not use this product while diving as water will block the signal.
- Do not use corrosive liquid to clean this product.
- If this product is accidentally exposed to chemicals, flush it with water.
- Do not use this product under extreme circumstances for temperatures below -10 or above 60.
- To avoid exploration, do not throw this product into fire.
- To avoid scratches, do not touch the earbuds with sharp objects.
- Do not insert objects into the earbud, otherwise, it would cause damage to the internal components.
- Do not disassemble the earbud.
- In case the earbuds run out of battery, please charge the earbuds when it’s out of use for more than a month.
- Please do not charge the product with the power adapter of a current greater than 2A. Excessive current flow could cause damage to the battery.
Battery Warning
There is a built-in lithium battery in this product. To avoid explosion, do NOT expose the product ta strong sunlight, fire or throw it into fire.