Moes ZS-D-EUB-WH-MS Zigbee Smart Water Heater Switch User Manual
- June 12, 2024
- MOES
Table of Contents
Zigbee Smart Water Heater
Switch User Manual
ZS-D-EUB-WH-MS Zigbee Smart Water Heater Switch
Alexa TUTORIAL
http://qr03.cn/DpgQc2| Google Home
TUTORIAL
http://qr03.cn/DOUP2j
---|---
Notes Before Installation
- Wi-Fi only support a 2.4GHz network (802.1 b/g/n)
- nly support one way/single pole circuit, not compatible with 2-way
- With Neutral wire or without Netral wire.
- Basic electrical wiring knowledge or experience is required , or please consult to a profesional electrician
- ON/OFF button also can be used as reset button. long press to reset your smart switch to factory defaults only do this if you are sure you want to erase all your setings
Download App and Register
1.1 How to download App?
Scan the QR code below or search for “Smart Life” inthe IOS APP store or
Google play.
IOS & Android System
http://e.tuya.com/smartlife
1.2 Setting Smart Life APP, How to Register and Login?
Download or Scan the QR Code and install Smart Life App.
Once download or Scan the QR Code, register your account.
1.3Enter your phone number or email which you prefer and select the country
you live in.
Obtain verification code. Enter verification code. Set Password.
1.4 Create “Family”
Enter the family name and select the room.
Family created sucessfully.
Wiring Diagram
2a. EU Touch Smart Water Heater Switch.
- Neutral wire out.
- Live wire out.
- Switch.
- Water Heater.
- Live wire in.
- Neutral wire in.
2b. EU Physical Smart Water Heater Switch,
- Neutral wire out.
- Live wire out.
- Switch.
- Water Heater.
- Live wire in.
- Neutral wire in.
2c. US Touch Smart Water Heater Switch.
- Neutral wire out.
- Live wire out.
- Switch.
- Water Heater.
- Live wire in.
- Neutral wire in.
How does APP connect with smart gateway device fast ?
- Open the appliction , click “Add Device” , click “ Gateway Control ” , then click “ Gateway Zigbee ”.
- Please reset gateway device , press the reset button for a long time until the indicator light ( green light ) is on continuously .
- First click “ confirm the two green lights are on ”, then Click “ Next ”, make sure the cellphone and gateway in the same network , so APP could connect with the gateway device .
- Device added successfully , click “ Done ”.
Smart gateway and APP connection complete , how to connect to the switch
-
Make sure the switch is electrified , Press any switch button for 10 second until the Wi – Fi red light flashes rapidly .
-
After the smart Gateway is connected to the APP , click “ Add subdevice ” and then click “ LED already blink ”.
-
Device connecting automatically , then click device added successfully , Rename the device and select the room then tap completed .
( Attention : The name should use numeric and letters , do not use special symbols ). -
Click the switch name below the switch icon to edit the switch name.
( Attention : The name shoud use numeric and letters , do not use special symbos )
Attention : Zigbee Gateway can only be connected to one account , then ,
co – manage by adding more than one family member .
How do I add family members ?
Add step : Click on the bottom right corner “ Me ”→ Click on ” Home Management
."
→ Click on the name of the family you have created → Into my family → Click on
” Add Member “, enter the name and account number of the member → Members can
be set as adminisrators → Click Save → Member added successfully.
The application that adds a member will pop up a window → Whether or not to accept the invitation → Click accept the invitation → Back to main page ” My home “→ Click on the top left corner to switch to the main family name .
THANK YOU
Documents / Resources
| Moes
ZS-D-EUB-WH-MS Zigbee Smart Water Heater
Switch
[pdf] User Manual
ZS-D-EUB-WH-MS Zigbee Smart Water Heater Switch, ZS-D-EUB-WH-MS, Zigbee Smart
Water Heater Switch, Smart Water Heater Switch, Water Heater Switch, Heater
Switch, Switch
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>