Hongding Q8S Security Camera User Manual

Hongding Q8S Security Camera

Instructions

APP Download
As shown in the figure, scan the QR code below with your phone to download the V380Pro app, install it, and register to log in.

Introduction to buttons

QR code distribution network
Before adding a wireless camera, it is recommended to turn on your phone’s WiFi first.

Scan body labels

1. Open the V380 Pro app to complete account registration, and click the “+” button on the homepage.
2. Use your phone to scan the QR code of the camera label.
   The label of the camera is usually located at the bottom or side of the body.

As the APP version is upgraded and iterated, there may be differences between the actual interface and the manual display interface, Please refer to the actual APP interface

Set the WiFi used by the device

1. Connect your phone to 2.4GHz WiFi;
2. Confirm the WiFi name in the app and enter the correct password.

*The WiFi function of the camera currently does not support 5G categories, and the WIFI name should not contain special characters.

Generate distribution network QR code

1. After the APP generates the distribution network QR code, please aim the camera lens at the phone screen to scan the distribution network QR code;
2. After the camera successfully recognizes the QR code, it will prompt “Received configuration information”. Please be patient and wait for the device to connect to the network;
3. After the camera is successfully connected to the network, it will prompt “Network connection completed” and click the “Hear successful prompt tone” button in the APP.

Completing the addition

1. The app will automatically add devices;
2. After adding, you can create groups for devices and set device

AP hotspot distribution network

1. Click the ‘Can’t find the body QR code? Please click here’ button;
2. Select ‘Can’t find the QR code on the device? Please tap here’; Click on ‘AP hotspot connection’.

Connect WIFI

1. Select the WiFi that the camera needs to use and fill in the corresponding WiFi password;
2. Click on the “Connect hotspot” button to connect the device hotspot (MV+ID);
3. Return to the app and automatically connect to the device.

Live Preview
In the device list, you can view the added cameras and click to view the real- time preview screen.

Replay Theater
After connecting to the camera using the APP, open the real-time preview interface and click on the “Replay” function bar below to enter the video playback recording interface.

FCC Warning

1. This device should be installed and operated with minimum distance 20cm between the radiator& your body.
2. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions. 11 Unis device may not cause harmful interference. and. (2) This device must accept any interference received, including interference that may cause undesired operation.
3. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
4. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, it not installed and used in accordance with the instructions, may cause harmful interference to radio communications, however, there is no guarantee that inference will not occur in a particular install action. munis eculoment does cause. harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/IV technician for help.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>