WATERPIK WP-663 Water Flosser User Guide
- June 16, 2024
- Waterpik
Table of Contents
QUICK START GUIDE
WP-660/662/663/670/672/
673/674/675/676
Register your product and receive over $50 in savings.
waterpik.com/registration
Visit waterpik.com/HowTo660 to watch How To
Video
Unit Prep
A. Fill reservoir with warm water and replace it firmly on the base B. Insert tip until it clicks into place. C. Turn pressure to high, point tip into sink, turn power and water switches ON until water flows. Turn switches OFF.
Water Floss
A. Start on low pressure and increase to your liking. Turn power ON. B. Turn water ON. Close lips enough to prevent splashing, while still allowing water to flow from mouth into the sink. C. Aim water at the gumline at a 90 degree angle. Follow the gumline and pause briefly between teeth.
TO AVOID MESS: KEEP TIP IN MOUTH WHILE UNIT IS ON.
This device is only compatible with voltages of 120 VAC, 60Hz
©2017 Water Pik, Inc.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>