OONO F-1061 20A Series Plastic Enclosure Wired SPST 10 Inch Amp Power Relay Module Instructions
- June 16, 2024
- OONO
Table of Contents
czh-labs.com
Plastic Enclosure Wired
SPST 10 Amp Power Relay Module
Model: F-1061 20A series
Features:
-
Polycarbonate plastic enclosure with a NPT 1/2” mounting nipple, LED indicator and pre-wired for a money-saving installation that is easy and quick.
-
Input control signal version: AC/DC 12V, AC/DC 24V, AC 120V, AC208-277V four versions selectable.
-
When controlled by a DC signal, the two wires on the input end do not need to care about their polarities.
-
Output switch SPST (Single Pole Single Throw), rated current 20A / 250VAC or 20A / 30VDC.
This is a simple and practical passive relay module, which is very convenient to use. All wires lead out via 1/2” mounting nipple, it can be flexible mounting with your junction box / outlet box. Two screw mounting holes are convenient for you to fix it on the wall or wooden board. -
Packing list: 1x relay module, 1x NPT 1/2” Zinc alloy conduit locknut, 2x M3x50mm screws.
Specifications:
Input Control Signal:
| F-1061 20A 12V| F-1061 20A 24V| F-1061 20A 120V| F-1061 20A 240V
---|---|---|---|---
Action voltage| AC 10 -14V Or
DC 10 -16V| AC 20 – 28V or DC 20 – 30V| AC 100 -130V| AC 208 – 277V
Action current| 75mA @12V| 38mA @24V| 45mA @120V| 45mA @240V
Output Switch:
| F-1061 20A, 12V 24V 120V 240V
---|---
Rated load| 20A 250VAC, 20A 30VDC (resistive load).
Mechanical
endurance| 10,000,000 operations
Electrical
endurance| 100,000 operations at 250 VAC, 20 A (resistive load, room temp., 5s
on 5s off)
Input and Output Status:
| Input Signal | LED | Output Switch |
|---|---|---|
| Low (or no connect) | OFF | Output switch disconnect |
| High | ON | Output switch connected |